EN 717-2:1994/AC:2002
|
WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD
|
CEN/TS 16165:2016
|
Determination of slip resistance of pedestrian surfaces - Methods of evaluation
|
EN 13183-1:2002/AC:2003
|
MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - DETERMINATION BY OVEN DRY METHOD
|
CEN/TR 16797-1:2015
|
Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application
|
EN 13986:2004
|
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
|
EN ISO 10456:2007/AC:2009
|
BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
|
EN 335:2013
|
Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products
|
EN 351-1:2007
|
Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention
|
EN 84:1997
|
Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure
|
EN 152:2011
|
Wood preservatives - Determination of the protective effectiveness of a preservative treatment against blue stain in wood in service - Laboratory method
|
EN 49-1:2016
|
Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 1: Application by surface treatment (Laboratory method)
|
PREN 599-2 : DRAFT 2015
|
DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - EFFICACY OF PREVENTIVE WOOD PRESERVATIVES AS DETERMINED BY BIOLOGICAL TESTS - PART 2: LABELLING
|
EN 717-1:2004
|
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
|
ISO 2859-2:1985
|
Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
|
EN 13238:2010
|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
|
PREN 16516 : DRAFT 2015
|
CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
|
EN 16449:2014
|
Wood and wood-based products - Calculation of the biogenic carbon content of wood and conversion to carbon dioxide
|
EN 46-1:2016
|
Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method)
|
EN ISO 9239-1:2010
|
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010)
|
EN 1533:2010
|
Wood flooring - Determination of bending strength under static load - Test methods
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015)
|
EN 599-1:2009+A1:2013
|
Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 1: Specification according to use class
|
PREN 350 : DRAFT 2014
|
DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - TESTING AND CLASSIFICATION OF THE RESISTANCE TO BIOLOGICAL AGENTS, THE PERMEABILITY TO WATER AND THE PERFORMANCE OF WOOD AND WOOD-BASED MATERIALS
|
EN 12664:2001
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
|
EN 16687:2015
|
Construction products - Assessment of release of dangerous substances - Terminology
|
EN 1014-3:2010
|
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote
|
EN 117:2012
|
Wood preservatives - Determination of toxic values against Reticulitermes species (European termites) (Laboratory method)
|
EN 460:1994
|
Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes
|
EN 73:2014
|
Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
|
CEN/TS 16183:2012
|
Sludge, treated biowaste and soil - Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC-MS)
|
CEN/TS 15083-1:2005
|
Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 1: Basidiomycetes
|
CEN/TR 14823:2003
|
Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method
|
ISO 9239-1:2010
|
Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
|
EN 113:1996/A1:2004
|
WOOD PRESERVATIVES - TEST METHOD FOR DETERMINING THE PROTECTIVE EFFECTIVENESS AGAINST WOOD DESTROYING BASIDIOMYCETES - DETERMINATION OF THE TOXIC VALUES
|
ISO 3129:2012
|
Wood Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens
|
EN 20-1:1992
|
Wood preservatives - Determination of the protective effectiveness against Lyctus Brunneus (Stephens) - Part 1: Application by surface treatment (laboratory method)
|
CEN/TS 15083-2:2005
|
Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi
|
EN 14342:2013
|
Wood flooring and parquet - Characteristics, evaluation of conformity and marking
|
CEN/TR 16797-2:2015
|
Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background
|