EN 717-1:2004

Current

Current The latest, up-to-date edition.

Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method

Available format(s):

Language(s):

Published date: 06-10-2004

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Reagents
   5.1 General
   5.2 Acetylacetone solution
   5.3 Ammonium acetate solution
   5.4 Formaldehyde standard solution
6 Apparatus
   6.1 Test chamber
   6.2 Air sampling system
   6.3 Equipment for chemical analysis
   6.4 Equipment for verification of air exchange rate
7 Test pieces
8 Procedure
   8.1 Test conditions
   8.2 Verification of test conditions
   8.3 Chamber preparation
   8.4 Preparation of test pieces
   8.5 Loading and starting procedure
   8.6 Air sampling and analysis
   8.7 Test duration
9 Determination of formaldehyde emission
   9.1 General
   9.2 Principle
   9.3 Procedure
   9.4 Calibration curve
   9.5 Calculation of the amount of absorbed formaldehyde
   9.6 Calculation of the formaldehyde emission
10 Determination of test result
11 Expression of results
12 Test report
Annex A (normative) Test chambers
Annex B (normative) Determination of air exchange rate
Annex C (normative) Determination of the steady-state
                      emission value
Annex D (informative) Analytical procedure for the
                      fluorimetric determination of
                      formaldehyde content
Bibliography

Abstract - (Show below) - (Hide below)

This European Standard specifies a chamber method with three options of test chambers for the determination of the formaldehyde emission from wood-based panels in terms of the steady-state concentration in a climate chamber under defined conditions, which relate to typical conditions in real-life. This chamber method can also be applied to the estimation of formaldehyde concentrations under various conditions in practice, by the use of mathematical models.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 112
Development Note	Supersedes ENV 717-1 (12/2004) Supersedes PREN 717-1. (10/2005)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current
Supersedes	PREN 717-1 : DRAFT 2002 ENV 717-1 : 1998

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DIN EN 717-1:2005-01	Identical
UNE-EN 717-1:2006	Identical
NF EN 717-1 : 2005	Identical
NBN EN 717-1 : 2004	Identical
PN EN 717-1 : 2006	Identical
NEN EN 717-1 : 2004	Identical
SN EN 717-1 : 2004	Identical
UNI EN 717-1 : 2004	Identical
NS EN 717-1 : 1ED 2005	Identical
DIN EN 717-1 E : 2005	Identical
I.S. EN 717-1:2004	Identical
BS EN 717-1:2004	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

PREN 15497 : DRAFT 2011	STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
ISO 14486:2012	Laminate floor coverings — Specification
ISO 16000-9:2006	Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method
PD CEN/TS 16526:2013	Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics
PD CEN/TS 16516:2013	Construction products. Assessment of release of dangerous substances. Determination of emissions into indoor air
PREN 14904-1 : DRAFT 2017	SURFACES FOR SPORTS AREAS - MULTI-SPORTS FLOOR SYSTEMS FOR INDOOR USE - PART 1: ESSENTIAL CHARACTERISTICS
DD CEN/TS 15398:2006	Resilient, textile and laminate floor coverings. Floor covering standard symbols
PREN 14342 : DRAFT 2011	WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
S.R. CEN/TR 16098:2010	CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - CONCEPT OF HORIZONTAL TESTING PROCEDURES IN SUPPORT OF REQUIREMENTS UNDER THE CPD
S.R. CEN/TS 15398:2016	RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS - COMPLEMENTARY ELEMENT
I.S. EN 16738:2015	EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
UNE-EN 16402:2014	Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing
17/30362165 DC : 0	BS EN 16402 - PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
I.S. EN 14915:2013	SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
CEN/TS 15398:2016	Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element
EN 14915:2013+A1:2017	Solid wood panelling and cladding - Characteristics, requirements and marking
DIN EN ISO 16000-9 E : 2008	INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER METHOD
DIN EN 14342 E : 2013	WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 300:2006	Oriented strand boards (OSB). Definitions, classification and specifications
BS EN 14279 : 2004	LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
BS EN 13698-2:2009	Pallet production specification Construction specification for 1000 mm x 1200 mm flat wooden pallets
BS EN 438-7:2005	High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
BS EN 15197:2007	Wood-based panels. Flaxboards. Specifications
BS EN 312:2010	Particleboards. Specifications
CEN/TS 16354:2013	Laminate floor coverings - Underlays - Specification, requirements and test methods
DIN EN 14904:2006-06	Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
EN 12182:2012	Assistive products for persons with disability - General requirements and test methods
CEN/TS 16526:2013	Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristics
CEN/TS 16368:2014	Lightweight Particleboards - Specifications
PREN 14915 : DRAFT 2013	SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
11/30249117 DC : 0	BS EN 14342 - WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 16738:2015	Emission safety of combustible air fresheners. Test methods
I.S. EN ISO 16000-10:2006	INDOOR AIR - PART 10: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CELL METHOD
10/30234290 DC : 0	BS EN 636 - PLYWOOD - SPECIFICATIONS
BS EN 16402:2013	Paints and varnishes. Assessment of emissions of substances from coatings into indoor air. Sampling, conditioning and testing
PD CEN/TS 15398:2016	Resilient, textile and laminate floor coverings. Floor covering standard symbols. Complementary element
12/30254092 DC : 0	BS EN 16368 - LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS
BS EN 16516:2017	Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air
DIN EN 15497:2014-07	STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
16/30339855 DC : 0	BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
11/30236369 DC : 0	BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER
09/30203195 DC : 0	BS EN 15497 - FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
17/30323851 DC : 0	BS ISO 19894 - WALKING TROLLEYS - REQUIREMENTS AND TEST METHODS
BS EN 16351:2015	Timber structures. Cross laminated timber. Requirements
02/121752 DC : DRAFT APR 2002	PREN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
PREN 14374 : DRAFT 2016	TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS
UNI EN 15497 : 2014	STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
UNI EN 16402 : 2013	PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
S.R. CEN/TS 16516:2013	CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
I.S. EN ISO 12460-3:2015	WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 3: GAS ANALYSIS METHOD (ISO 12460-3:2015)
PREN 16354 : DRAFT 2016	LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
16/30333219 DC : 0	BS EN 16354 - LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
PREN 636 : DRAFT 2010	PLYWOOD - SPECIFICATIONS
DIN EN 12182:2012-07	Assistive products for persons with disability - General requirements and test methods
DIN EN 14904 E : 2006	SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
DIN EN 13986:2015-06	WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
DIN EN 14342:2013-09	Wood flooring - Characteristics, evaluation of conformity and marking
DIN EN 14322:2004-06	WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION
UNE-EN 1272:2018	Child care articles - Table mounted chairs - Safety requirements and test methods
UNE-EN 14080:2013	Timber structures - Glued laminated timber and glued solid timber - Requirements
I.S. EN 300:2006	ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
I.S. EN 636:2012	PLYWOOD - SPECIFICATIONS
I.S. EN 12182:2012	ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 13986:2004	WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 312:2010	PARTICLEBOARDS - SPECIFICATIONS
I.S. EN 14342:2013	WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN 13698-2:2009	PALLET PRODUCTION SPECIFICATION - PART 2: CONSTRUCTION SPECIFICATION FOR 1000 MM X 1200 MM FLAT WOODEN PALLETS
I.S. EN 13964:2014	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 14279:2005	LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
I.S. EN 14322:2017	WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION
I.S. EN 1272:2017	CHILD CARE ARTICLES - TABLE MOUNTED CHAIRS - SAFETY REQUIREMENTS AND TEST METHODS
EN 16351:2015	Timber structures - Cross laminated timber - Requirements
DIN EN 16402 E : 2014	PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
14/30298789 DC : 0	BS EN 16738 - EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
11/30237554 DC : 0	BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS
17/30357045 DC : 0	BS EN 16232:2013/A1 - CHILD USE AND CARE ARTICLES - INFANT SWINGS
DIN EN 16738 E : 2016	EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
DIN EN 16351 E : 2015	TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
DIN EN ISO 12460-3:2016-03	Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2015); German version EN ISO 12460-3:2015
BS EN 15497:2014	Structural finger jointed solid timber. Performance requirements and minimum production requirements
11/30244187 DC : 0	BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
DIN EN ISO 12460-3 E : 2016	WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 3: GAS ANALYSIS METHOD (ISO 12460-3:2015)
PD CEN/TS 16368:2014	Lightweight Particleboards. Specifications
PD CEN/TR 16098:2010	Construction products. Assessment of release of dangerous substances. Concept of horizontal testing procedures in support of requirements under the CPD
UNI CEN/TS 16354 : 2014	LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
PREN 14322 : DRAFT 2014	WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION
15/30329856 DC : 0	BS EN 14904 - SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
S.R. CEN/TS 16368:2014	LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS
I.S. EN 14041:2018	RESILIENT, TEXTILE, LAMINATE AND MODULAR MULTILAYER FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
PREN 438-7 : DRAFT 2014	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
S.R. CEN/TS 16526:2013	SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS
UNI CEN/TS 16368 : 2014	LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS
UNE-EN 16738:2016	Emission safety of combustible air fresheners - Test methods
EN 16402:2013	Paints and varnishes - Assessment of emissions of substances from coatings into indoor air - Sampling, conditioning and testing
DIN EN 1272:2016-02 (Draft)	CHILD CARE ARTICLES - TABLE MOUNTED CHAIRS - SAFETY REQUIREMENTS AND TEST METHODS
DIN EN 438-7:2005-04	High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005
DIN EN 636:2015-05	PLYWOOD - SPECIFICATIONS
DIN EN 13964:2014-08	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 14080:2013	TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
EN ISO 12460-3:2015	WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 3: GAS ANALYSIS METHOD (ISO 12460-3:2015)
EN 13986:2004	Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 16516:2017	Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air
EN 13986:2004+A1:2015	Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
EN 13964:2014	Suspended ceilings - Requirements and test methods
EN 13698-2:2009	Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets
EN 15197:2007	Wood-based panels - Flaxboards - Specifications
UNI EN 312 : 2010	PARTICLEBOARDS - SPECIFICATIONS
UNI EN 14342 : 2013	WOOD FLOORING AND PARQUET - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
UNI EN 14080 : 2013	TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
UNI CEN/TS 16526 : 2014	SANDWICH BOARDS FOR FURNITURE (SWB-F) - FACTORY MADE PRODUCTS - DEFINITION, CLASSIFICATION AND TEST METHODS FOR DETERMINATION OF PERFORMANCE CHARACTERISTICS
UNI EN 13964 : 2014	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 12182 : 2012	ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
UNI EN 13698-2 : 2009	PALLET PRODUCTION SPECIFICATION - PART 2: CONSTRUCTION SPECIFICATION FOR 1000 MM X 1200 MM FLAT WOODEN PALLETS
UNI EN 14279 : 2009	LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
DIN EN 16351:2015-12	Timber structures - Cross laminated timber - Requirements
I.S. EN 15497:2014	STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
I.S. CEN TS 15398:2006	RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - FLOOR COVERING STANDARD SYMBOLS
11/30249114 DC : 0	BS EN 15497 - STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
09/30202519 DC : 0	BS EN 312 - PARTICLEBOARDS - SPECIFICATIONS
DIN EN 16738:2016-04	EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
I.S. EN 16402:2013	PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
14/30303732 DC : 0	BS EN 14322 - WOOD-BASED PANELS - MELAMINE FACED BOARD FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION
I.S. EN 16351:2015	TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
13/30268273 DC : 0	BS EN 14915 - SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
I.S. EN ISO 16000-9:2006	INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER METHOD
05/30132020 DC : DRAFT APR 2005	BS EN 15197 - WOOD-BASED PANELS - FLAXBOARDS - SPECIFICATIONS
13/30217369 DC : 0	BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
15/30322088 DC : 0	BS EN 16516 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
16/30340580 DC : 0	BS EN 17009 - FLOORING OF LIGNIFIED MATERIALS OTHER THAN WOOD - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
PREN 14904 : DRAFT 2015	SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
09/30193698 DC : DRAFT JAN 2009	BS EN 14080 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED LAMINATED SOLID TIMBER - REQUIREMENTS
UNI CEN/TS 16516 : 2013	CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
SAE J 2989 : APR 2018	HANDLING AND PACKAGING OF MATERIALS AND COMPONENTS FOR EMISSIONS TESTING
14/30303797 DC : 0	BS EN 438-7 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
BS EN ISO 16000-9:2006	Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Emission test chamber method
PREN 14041 : DRAFT 2016	RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
PREN 16738 : DRAFT 2014	EMISSION SAFETY OF COMBUSTIBLE AIR FRESHENERS - TEST METHODS
DIN EN 14915 E : 2013	SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING
DIN EN 14755 E : 2006	EXTRUDED PARTICLEBOARDS - SPECIFICATIONS
DIN EN 300:2006-09	ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
DIN EN 13698-2:2009-10	PALLET PRODUCTION SPECIFICATION - PART 2: CONSTRUCTION SPECIFICATION FOR 1000 MM X 1200 MM FLAT WOODEN PALLETS
DIN EN 14080:2013-09	TIMBER STRUCTURES - GLUED LAMINATED TIMBER AND GLUED SOLID TIMBER - REQUIREMENTS
BS EN 14904:2006	Surfaces for sports areas. Indoor surfaces for multi-sports use. Specification
BS EN 14755:2005	Extruded particleboards. Specifications
DIN EN 14904:2015-09 (Draft)	SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
UNE-EN 16351:2016	Timber structures - Cross laminated timber - Requirements
BS EN 14322:2017	Wood-based panels. Melamine faced board for interior uses. Definition, requirements and classification
UNE-EN 14342:2013	Wood flooring and parquet - Characteristics, evaluation of conformity and marking
BS EN 14342:2013	Wood flooring and parquet. Characteristics, evaluation of conformity and marking
DIN EN 15197:2007-05	Wood-based panels - Flaxboards - Specifications
ISO 12460-3:2015	Wood-based panels Determination of formaldehyde release Part 3: Gas analysis method
BS EN 1272:2017	Child care articles. Table mounted chairs. Safety requirements and test methods
UNE-EN 312:2010	Particleboards - Specifications
UNE-EN ISO 12460-3:2016	Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2015)
UNE-EN 13698-2:2010	Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets
ISO 16000-10:2006	Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing Emission test cell method
BS EN 14080:2013	Timber structures. Glued laminated timber and glued solid timber. Requirements
UNE-EN 13986:2006	Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
BS EN 12182:2012	Assistive products for persons with disability. General requirements and test methods
DIN EN 15197 E : 2007	WOOD-BASED PANELS - FLAXBOARDS - SPECIFICATIONS
EN 14755:2005	Extruded particleboards - Specifications
EN 14904:2006	Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
EN ISO 16000-10:2006	Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006)
EN 14080:2013	Timber structures - Glued laminated timber and glued solid timber - Requirements
EN 16738:2015	Emission safety of combustible air fresheners - Test methods
EN 14279:2004+A1:2009	Laminated Veneer Lumber (LVL) - Definitions, classification and specifications
EN 438-7:2005 (edition 2)	High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
EN 636:2012+A1:2015	Plywood - Specifications
EN ISO 16000-9:2006/AC:2007	INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER METHOD
EN 15497:2014	Structural finger jointed solid timber - Performance requirements and minimum production requirements
EN 312:2010	Particleboards - Specifications
EN 300:2006	Oriented Strand Boards (OSB) - Definitions, classification and specifications
EN 14342:2013	Wood flooring and parquet - Characteristics, evaluation of conformity and marking
I.S. EN 438-7:2005	HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 7: COMPACT LAMINATE AND HPL COMPOSITE PANELS FOR INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
UNE-EN 15497:2014	Structural finger jointed solid timber - Performance requirements and minimum production requirements
BS ISO 14486:2012	Laminate floor coverings. Specification
DIN EN 15497 E : 2014	STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
12/30258159 DC : 0	BS EN 16402 - PAINT AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
PD CEN/TS 16354:2013	Laminate floor coverings. Underlays. Specification, requirements and test methods
11/30253102 DC : 0	BS EN 16351 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
PREN 13964 : DRAFT 2013	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 16516:2017	CONSTRUCTION PRODUCTS: ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - DETERMINATION OF EMISSIONS INTO INDOOR AIR
S.R. CEN/TS 16354:2013	LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
14/30295898 DC : 0	BS EN 14904 - SURFACES FOR SPORTS AREAS - INDOOR SURFACES FOR MULTI-SPORTS USE - SPECIFICATION
17/30353879 DC : 0	BS EN 17104 - THERMOPLASTICS RIGID PROTECTIVE WALLCOVERING PANELS FOR INTERNAL USE IN BUILDINGS - PERFORMANCE CHARACTERISTICS
DIN EN 14279 E : 2009	LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
DIN EN ISO 16000-10:2006-06	Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006)
DIN EN 14322 E : 2017	WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - DEFINITION, REQUIREMENTS AND CLASSIFICATION
UNE-EN 13964:2016	Suspended ceilings - Requirements and test methods
BS EN 636 : 2012	PLYWOOD - SPECIFICATIONS
BS EN ISO 16000-10:2006	Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method
UNE-EN 14322:2017	Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification
BS EN 13986 : 2004	WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 14915 : 2013	SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 13964:2014	Suspended ceilings. Requirements and test methods
CEN/TR 16098:2010	Construction products: Assessment of release of dangerous substances - Concept of horizontal testing procedures in support of requirements under the CPD
DIN EN ISO 16000-9:2008-04	Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006)
CEN/TS 16516:2013	Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air
EN 1272:2017	Child care articles - Table mounted chairs - Safety requirements and test methods
DIN EN 14915:2013-12	SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING
DIN EN 312:2010-12	Particleboards - Specifications
DIN EN 16402:2014-02	PAINTS AND VARNISHES - ASSESSMENT OF EMISSIONS OF SUBSTANCES FROM COATINGS INTO INDOOR AIR - SAMPLING, CONDITIONING AND TESTING
DIN EN 14279:2009-07	LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS
EN 14322:2017	Wood-based panels - Melamine faced board for interior uses - Definition, requirements and classification
DIN EN 14755:2006-01	Extruded particleboards - Specifications
UNE-EN 14915:2013	Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking
UNE-EN 13986:2006+A1:2015	Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking

Standards Referencing This Book - (Show below) - (Hide below)

EN 326-1:1994	Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
ISO 16000-3:2011	Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method
CR 213:1984	Particle boards - Determination of formaldehyde emission under specified conditions - Method called: formaldehyde emission method

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart