Skip to content
Please enter a keyword to search

  • 17/30352966 DC : 0

    NA Status of Standard is Unknown

    BS EN ISO 15630-2 - STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC AND LATTICE GIRDER

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date: 

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Symbols
    4 General provisions concerning test pieces
    5 Tensile test
    6 Bend test on welded intersection
    7 Shear test
    8 Axial force fatigue test of welded fabric
    9 Chemical analysis
    10 Measurement of the geometrical characteristics
    11 Test report
    Bibliography

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Committee ISE/104
    Document Type Draft
    Publisher British Standards Institution
    Status NA

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 4945:1977 Steel Determination of nitrogen content Spectrophotometric method
    ISO 10701:1994 Steel and iron — Determination of sulfur content — Methylene blue spectrophotometric method
    ISO 13898-2:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of nickel content
    ISO 671:1982 Steel and cast iron Determination of sulphur content Combustion titrimetric method
    ISO 4947:1986 Steel and cast iron Determination of vanadium content Potentiometric titration method
    ISO 18632:2010 Alloyed steel Determination of manganese Potentiometric and visual titration method
    ISO 10697-1:1992 Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 1: Determination of acid-soluble calcium content
    ISO 15353:2001 Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN)
    ISO 4946:2016 Steel and cast iron Determination of copper 2,2'-Biquinoline spectrophotometric method
    ISO/TR 17055:2002 Steel Determination of silicon content Inductively coupled plasma atomic emission spectrometric method
    ISO 11652:1997 Steel and iron Determination of cobalt content Flame atomic absorption spectrometric method
    ISO 17053:2005 Steel and iron Determination of oxygen Infrared method after fusion under inert gas
    ISO 4965-1:2012 Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 1: Testing systems
    ISO 10702:1993 Steel and iron — Determination of nitrogen content — Titrimetric method after distillation
    ISO 13898-3:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 3: Determination of copper content
    ISO 4829-1:1986 Steel and cast iron Determination of total silicon content Reduced molybdosilicate spectrophotometric method Part 1: Silicon contents between 0,05 and 1,0 %
    ISO 4941:1994 Steel and iron — Determination of molybdenum content — Thiocyanate spectrophotometric method
    ISO 13900:1997 Steel — Determination of boron content — Curcumin spectrophotometric method after distillation
    ISO 10278:1995 Steel — Determination of manganese content — Inductively coupled plasma atomic emission spectrometric method
    ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
    ISO 4937:1986 Steel and iron — Determination of chromium content — Potentiometric or visual titration method
    ISO 13902:1997 Steel and iron — Determination of high sulfur content — Infrared absorption method after combustion in an induction furnace
    ISO 4943:1985 Steel and cast iron — Determination of copper content — Flame atomic absorption spectrometric method
    ISO 629:1982 Steel and cast iron — Determination of manganese content — Spectrophotometric method
    ISO 13933:2014 Steel and iron Determination of calcium and magnesium Inductively coupled plasma atomic emission spectrometric method
    ISO 4939:2016 Steel Determination of nickel Dimethylglyoxime spectrophotometric method
    ISO 4935:1989 Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace
    ISO 17058:2004 Steel and iron — Determination of arsenic content — Spectrophotometric method
    ISO 13898-4:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 4: Determination of cobalt content
    ISO/TS 13899-3:2005 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content
    ISO 19272:2015 Low alloyed steel Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method)
    ISO 10280:1991 Steel and iron — Determination of titanium content — Diantipyrylmethane spectrometric method
    ISO 4938:2016 Steel and iron Determination of nickel content Gravimetric or titrimetric method
    ISO 9513:2012 Metallic materials — Calibration of extensometer systems used in uniaxial testing
    ISO 439:1994 Steel and iron Determination of total silicon content Gravimetric method
    ISO 7438:2016 Metallic materials Bend test
    ISO 11653:1997 Steel — Determination of high cobalt content — Potentiometric titration method after separation by ion exchange
    ISO 4942:2016 Steels and irons Determination of vanadium content N-BPHA spectrophotometric method
    ISO 437:1982 Steel and cast iron Determination of total carbon content Combustion gravimetric method
    ISO 9658:1990 Steel — Determination of aluminium content — Flame atomic absorption spectrometric method
    ISO/TS 13899-1:2004 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content
    ISO 4940:1985 Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method
    ISO 10700:1994 Steel and iron — Determination of manganese content — Flame atomic absorption spectrometric method
    ISO 15351:1999 Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method)
    ISO 10714:1992 Steel and iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method
    ISO 4829-2:2016 Steels Determination of total silicon contents Reduced molybdosilicate spectrophotometric method Part 2: Silicon contents between 0,01 % and 0,05 %
    ISO 15349-2:1999 Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)
    ISO 17054:2010 Routine method for analysis of high alloy steel by X-ray fluorescence spectrometry (XRF) by using a near-by technique
    ISO 9647:1989 Steel and iron Determination of vanadium content Flame atomic absorption spectrometric method
    ISO 13899-2:2005 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content
    ISO 9441:1988 Steel — Determination of niobium content — PAR spectrophotometric method
    ISO 15350:2000 Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method)
    ISO 13898-1:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 1: General requirements and sample dissolution
    ISO 9556:1989 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
    ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
    ISO 4934:2003 Steel and iron Determination of sulfur content Gravimetric method
    ISO 16918-1:2009 Steel and iron Determination of nine elements by the inductively coupled plasma mass spectrometric method Part 1: Determination of tin, antimony, cerium, lead and bismuth
    ISO 4965-2:2012 Metallic materials — Dynamic force calibration for uniaxial fatigue testing — Part 2: Dynamic calibration device (DCD) instrumentation
    ISO 10720:1997 Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas
    ISO 10153:1997 Steel Determination of boron content Curcumin spectrophotometric method
    ISO 10698:1994 Steel — Determination of antimony content — Electrothermal atomic absorption spectrometric method
    ISO 10138:1991 Steel and iron — Determination of chromium content — Flame atomic absorption spectrometric method
    ISO 10697-2:1994 Steel — Determination of calcium content by flame atomic absorption spectrometry — Part 2: Determination of total calcium content
    ISO 15355:1999 Steel and iron — Determination of chromium content — Indirect titration method
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective