93/68/EEC : 1993 AMD 2 1998
|
COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC |
EN 152-1:1988
|
Test methods for wood preservatives - Laboratory method for determining the preventive effectiveness of a preservative treatment against blue stain in service - Part 1: Brushing procedure |
EN 485-1:2016
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN 755-1:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
EN 335-2:2006
|
Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
EN 754-3:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
EN 754-7:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
EN 755-5:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form |
EN 152-2:1988/AC1:1989
|
Test methods for wood preservatives - Laboratory method for determining the protective effectiveness of a preservative treatment against blue stain in service - Part 2: Application by methods other than brushing |
ISO 1462:1973
|
Metallic coatings Coatings other than those anodic to the basis metal Accelerated corrosion tests Method for the evaluation of the results |
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
EN 351-1:2007
|
Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
EN 485-3:2003
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
EN 755-9:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
ENV 206 : 1990
|
CONCRETE - PERFORMANCE, PRODUCTION, PLACING AND COMPLIANCE CRITERIA |
EN 10244-2:2009
|
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
EN ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
EN 485-2:2016
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
EN 485-4:1993
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
EN 1317-3:2010
|
Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions |
EN 755-3:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form |
EN 755-8:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 10025:1990/A1:1993
|
HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
EN 755-4:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form |
ISO 3130:1975
|
Wood — Determination of moisture content for physical and mechanical tests |
EN 352-2:2002
|
Hearing protectors - General requirements - Part 2: Ear-plugs |
EN 755-7:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
EN 45011 : 1998
|
GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
ISO 2081:2008
|
Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
EN 754-6:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
EN 350-2:1994
|
Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
EN 755-6:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form |
EN 1317-2 : 1998
|
ROAD RESTRAINT SYSTEMS - PART 2: PERFORMANCE CLASSES, IMPACT TEST ACCEPTANCE CRITERIA AND TEST METHODS FOR SAFETY BARRIERS INCLUDING VEHICLE PARAPETS |
EN 754-1:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
EN 515:2017
|
Aluminium and aluminium alloys - Wrought products - Temper designations |
EN 754-5:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
EN 573-4:2004
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN 352-1:2002
|
Hearing protectors - General requirements - Part 1: Ear-Muffs |
ISO 2178:2016
|
Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
EN 754-8:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 460:1994
|
Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
EN 599-2:2016
|
Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 2: Labelling |
EN 754-2:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
EN 252:2014
|
Field test method for determining the relative protective effectiveness of a wood preservative in ground contact |
ISO 3575:2016
|
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities |
EN 1317-1:2010
|
Road restraint systems - Part 1: Terminology and general criteria for test methods |
EN 45012 : 1998
|
GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
ISO 2064:1996
|
Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
EN 754-4:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
EN 573-3:2013
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
EN 573-1:2004
|
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system |
EN ISO 14713 : 1999
|
PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - ZINC AND ALUMINIUM COATINGS - GUIDELINES |
EN 755-2:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
EN 22063 : 1993
|
METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS |
EN 45001 : 1989
|
GENERAL CRITERIA FOR THE OPERATION OF TESTING LABORATORIES |
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels |