• ISO 2081:2008

    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

    Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  10-05-2019

    Language(s):  English, French

    Published date:  10-12-2008

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 2081:2008 specifies requirements for electroplated coatings of zinc with supplementary treatments on iron or steel. It includes information to be supplied by the purchaser to the electroplater, and the requirements for heat treatment before and after electroplating.

    It is not applicable to zinc coatings applied

    • to sheet, strip or wire in the non-fabricated form,
    • to close-coiled springs, or
    • for purposes other than protective or decorative.

    ISO 2081:2008 does not specify requirements for the surface condition of the basis metal prior to electroplating with zinc. However, defects in the surface of the basis metal can adversely affect the appearance and performance of the coating.

    The coating thickness that can be applied to threaded components can be limited by dimensional requirements, including class or fit.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 107/SC 3
    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    13/30294866 DC : 0 BS EN 61058-1 - SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    ISO 17613-1:2006 Manually operated pumps for drinking water Selection and acceptance Part 1: Southeast Asia
    BS 7046(1989) : AMD 7487 SPECIFICATION FOR FULL-LENGTH PARALLEL GROOVED PINS, WITH CHAMFER
    BS EN 22338 : 1992 PARALLEL PINS, UNHARDENED
    12/30240603 DC : 0 BS EN 60320-1 ED 3.0 - APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 1995-1-1:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    NF EN 61242 : 1997 AMD 13 2018 ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES
    BS EN ISO 8936:2017 Awnings for leisure accommodation vehicles. Requirements and test methods
    BS 7051(1989) : AMD 7492 SPECIFICATION FOR HALF-LENGTH TAPER GROOVED PINS
    NBR 6527 : 1998 ERRATA 2000 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS
    BS EN ISO 27830:2017 METALLIC AND OTHER INORGANIC COATINGS - REQUIREMENTS FOR THE DESIGNATION OF METALLIC AND INORGANIC COATINGS
    DIN EN 14545 E : 2009 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    BS 7052(1989) : AMD 7493 SPECIFICATION FOR ROUND HEAD GROOVED PINS
    UNI EN 14545 : 2009 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    BS EN 60838-2-1 : 1997 MISCELLANEOUS LAMPHOLDERS - PART 2: PARTICULAR REQUIREMENTS - SECTION 1: LAMPHOLDERS S14
    BS EN 14545:2008 Timber structures. Connectors. Requirements
    13/30216084 DC : 0 BS ISO 7441 - CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN OUTDOOR EXPOSURE CORROSION TESTS
    11/30247279 DC : 0 BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL
    BS ISO 27830 : 2008 METALLIC AND OTHER INORGANIC COATINGS - GUIDELINES FOR SPECIFYING METALLIC AND INORGANIC COATINGS
    NBR IEC 62080 : 2011 SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
    ASTM B 767 : 1988 : R2010 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
    BS 7053(1989) : AMD 7494 SPECIFICATION FOR COUNTERSUNK HEAD GROOVED PINS
    UNI EN 13071-2 : 2013 STATIONARY WASTE CONTAINERS UP TO 5000L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
    CEI EN 60999-1 : 2000 CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] UP TO 35 MM[2] (INCLUDED)
    13/30286988 DC : 0 BS EN 16662 - ROAD VEHICLES - SUPPLEMENTARY GRIP DEVICES FOR TYRES OF PASSENGER CARS AND LIGHT DUTY VEHICLES - SAFETY REQUIREMENTS AND TEST METHOD
    10/30216162 DC : DRAFT DEC 2010 BS EN 62196-1 - PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 61995-1:2008 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 8936 E : 2017 AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017)
    BS EN 60998-1:2004 Connecting devices for low-voltage circuits for household and similar purposes General requirements
    BS 6917(1987) : 1987 METHOD FOR CORROSION TESTING IN ARTIFICIAL ATMOSPHERES: GENERAL PRINCIPLES
    BIS IS/IEC 60320-1 : 2001 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    CEI EN 62094-1 : 2004 INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 60998-1:2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
    15/30304603 DC : 0 BS EN 50066 - MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
    BS EN 60998-2-1:2004 Connecting devices for low-voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with screw-type clamping units
    PD IEC/TR 61916:2017 ELECTRICAL ACCESSORIES - HARMONIZATION OF GENERAL RULES
    BS EN 60999-1:2000 Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
    NBR ISO 6392-1 : 2004 EARTH-MOVING MACHINERY - LUBRICATION FITTINGS - PART 1: NIPPLE TYPE
    BS 7048(1989) : AMD 7489 SPECIFICATION FOR THIRD-LENGTH CENTRE GROOVED PINS
    DIN ISO 4042:1992-06 THREADED COMPONENTS - ELECTROPLATED COATINGS
    BS EN ISO 14713-1:2017 (published 2017-07) Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures General principles of design and corrosion resistance
    BS EN 12496:2013 (published 2013-06) Galvanic anodes for cathodic protection in seawater and saline mud
    02/106055 DC : 0 PREN 14545 - TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    DIN EN 1090-5 E : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    NF EN 60999-1 : 2000 CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREW LESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] TO 35 MM[2] (INCLUDED)
    BS 951(2009) : 2009 ELECTRICAL EARTHING - CLAMPS FOR EARTHING AND BONDING - SPECIFICATION
    NF EN 60669-1 : 2000 AMD 2 2009 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    EN 60670-1:2005/A1:2013 BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS (IEC 60670-1:2002/A1:2011, MODIFIED)
    BS 3676-1(2000) : 2000 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    DIN EN 14545:2009-02 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    DIN EN ISO 14713-1:2010-05 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
    BS 6060(1981) : 1981 SPECIFICATION FOR NIPPLE TYPE LUBRICATION FITTINGS FOR EARTH MOVING MACHINERY
    06/30133254 DC : 0 BS EN 13071-2 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
    BS 6913-13(1997) : 1997 OPERATION AND MAINTENANCE OF EARTH-MOVING MACHINERY - SPECIFICATION FOR LUBRICATION FITTINGS - NIPPLE TYPE
    BS EN 60155 : 1995 GLOW-STARTERS FOR FLUORESCENT LAMPS
    BS EN 60999 : 1993 CONNECTING DEVICES - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS FOR ELECTRICAL COPPER CONDUCTORS
    15/30280950 DC : 0 BS EN ISO 8936 - AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS
    16/30340972 DC : 0 BS EN ISO 27830 ED 2.0 - METALLIC AND OTHER INORGANIC COATINGS - GUIDELINES FOR SPECIFYING METALLIC AND INORGANIC COATINGS
    BS EN 1090-5 : 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    NBR IEC 61242 : 2013 ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES
    DIN 50961:2012-04 ELECTROPLATED COATINGS - ZINC COATINGS ON IRON OR STEEL - TERMS, TESTING AND CORROSION RESISTANCE
    13/30291353 DC : 0 BS EN 60838-1 ED 5.0 - MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS
    13/30277668 DC : 0 BS EN 62196-1 ED 3.0 - PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
    96/205308 DC : 0 PREN 50245 - PLUGS AND SOCKET-OUTLETS 16A 250 V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES GENERAL REQUIREMENTS AND DIMENSIONS VARIANT 1 (3P + 2P)
    BS 7049(1989) : AMD 7490 SPECIFICATION FOR HALF-LENGTH CENTRE GROOVED PINS
    ASTM B 767 : 1988 : R2001 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
    09/30200143 DC : 0 BS EN 62080 - SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
    IEC 60998-1:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
    DIN EN 14592:2012-07 Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012)
    BS 7047(1989) : AMD 7488 SPECIFICATION FOR HALF-LENGTH REVERSE TAPER GROOVED PINS
    06/30133250 DC : 0 BS EN 13071-1 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
    09/30203506 DC : 0 BS EN 61534-1 - POWER TRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
    I.S. EN ISO 14713-1:2017 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
    I.S. EN 62080:2009 SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
    13/30257822 DC : 0 BS EN 60670-1 ED 2.0 - BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    BS EN 50066 : 1993 MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
    PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
    CEI EN 60998-1 : 2005 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
    10/30232452 DC : 0 BS EN 840-5 - MOBILE WASTE CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
    NF EN 62080 : 2010 AMD 2 2015 SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
    BS ISO 17613-1 : 2006 MANUALLY OPERATED PUMPS FOR DRINKING WATER - SELECTION AND ACCEPTANCE - PART 1: SOUTHEAST ASIA
    BS EN 60998-2-2:2004 Connecting devices for low voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with screwless-type clamping units
    03/116049 DC : DRAFT NOV 2003 BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
    UNI EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
    CEI 23-95 : 2010 RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION INCORPORATED IN OR TO BE ASSOCIATED WITH FIXED SOCKET-OUTLETS (SRCBOS)
    DIN EN 12496:2014-02 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
    BS EN 28733 : 1992 PARALLEL PINS WITH INTERNAL THREAD, UNHARDENED
    CEI EN 61534-1 : 2012 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
    PREN 12574-2 : DRAFT 2015 STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
    BIS IS 1293 : 2005 AMD 6 2013 PLUGS AND SOCKET-OUTLETS OF RATED VOLTAGE UP TO AND INCLUDING 250 VOLTS AND RATED CURRENT UP TO 16 AMPERES - SPECIFICATION
    BS EN 61534-1 : 2011 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
    BS EN 62094-1:2003 Indicator light units for household and similar fixed-electrical installations General requirements
    BS 7050(1989) : AMD 7491 SPECIFICATION FOR FULL-LENGTH TAPER GROOVED PINS
    CEI 23-97 : 2010 SOCKET-OUTLETS INTERLOCKED WITH A CIRCUIT BREAKER FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (PIA)
    96/205309 DC : 0 PREN 50245 - PLUGS AND SOCKET-OUTLETS 16 A 250V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES - GENERAL REQUIREMENTS AND DIMENSIONS VARIANT 2 (3P)
    DIN EN ISO 14713-1 E : 2010 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
    15/30323520 DC : 0 BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
    08/30132181 DC : DRAFT AUG 2008 BS 951 - ELECTRICAL EARTHING - CLAMPS FOR EARTHING AND BONDING - SPECIFICATION
    98/105109 DC : DRAFT JUNE 1998 PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY
    96/205310 DC : 0 PREN 50246 - PLUGS AND SOCKET-OUTLETS 16 A 250 V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES - CONVERSION ADAPTERS
    UNE-EN ISO 14713-1:2017 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
    CEI 23-50 : 2007 PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES GENERAL REQUIREMENTS
    CEI 23-96 : 2010 SOCKET-OUTLETS INTERLOCKED WITH A RESIDUAL CURRENT DEVICE WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (PID)
    ISO 27830:2017 Metallic and other inorganic coatings Requirements for the designation of metallic and inorganic coatings
    UTEC 61 610 : 2007 ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - REMOVABLE EARTHING BARS
    03/317673 DC : 0 IEC 61995-1 - DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
    NBR NM-60669-1 : 2004 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    BS 6338(1982) : 1982 SPECIFICATION FOR CHROMATE CONVERSION COATINGS ON ELECTROPLATED ZINC AND CADMIUM COATINGS
    I.S. 193:2006 TIMBER TRUSSES FOR ROOFS
    BS EN 61210:2010 Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
    I.S. EN 60998-2-2:2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-2: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREWLESS-TYPE CLAMPING UNITS
    BS 7045(1989) : AMD 7486 SPECIFICATION FOR FULL-LENGTH PARALLEL GROOVED PINS, WITH PILOT
    UNE-EN 61534-1:2011 Powertrack systems -- Part 1: General requirements
    98/202332 DC : DRAFT MAY 1998 IEC 60670-1 - BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 61210:2010 CONNECTING DEVICES - FLAT QUICK-CONNECT TERMINATIONS FOR ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS
    09/30200661 DC : 0 BS EN 60669-1 ED 4.0 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN ISO 8936:2017 AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017)
    BS EN 60998-2-3:2004 Connecting devices for low-voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
    07/30168266 DC : 0 BS ISO 27830 - METALLIC AND OTHER INORGANIC COATINGS - STANDARD GUIDE FOR SPECIFYING SUCH COATINGS
    EN 61534-1:2011/A1:2014 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS (IEC 61534-1:2011/A1:2014)
    PREN 1337-1 : DRAFT 2018 STRUCTURAL BEARINGS - PART 1: GENERAL
    PREN 840-5 : DRAFT 2010 MOBILE WASTE CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
    NBR IEC 62196-1 : 2013 PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
    IEC 60669-1:2017 RLV Switches for household and similar fixed-electrical installations - Part 1: General requirements
    DIN EN 14592 E : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
    IEC 61242:1995 Electrical accessories - Cable reels for household and similar purposes
    EN 61242:1997/A13:2017 ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES
    NBR 11202 : 1990 ELEMENTOS DE FIXACAO ROSCADOS COM REVESTIMENTOS ELETRODEPOSITADOS
    BS EN 62080 : 2009 SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES
    NBR IEC 60309-1 : 2015 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    UNE-EN 61210:2011 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
    PREN 50066 : DRAFT 2015 MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
    IEC 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
    EN 61995-1:2008/A1:2017 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 61995-1:2005/A1:2016)
    IEC 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
    CEI EN 61995-1 : 2009 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
    IEC 60838-1 REDLINE : 5ED 2016 MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS
    I.S. EN 60309-1:1999 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 (EQV))
    I.S. EN 12496:2013 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
    I.S. EN 60999-1:2003 CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] UP TO 35 MM[2] (INCLUDED)
    EN IEC 61730-1:2018/AC:2018-06 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016)
    BS EN 61995-1:2008 Devices for the connection of luminaires for household and similar purposes General requirements
    I.S. EN 60670-1:2005 BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS (IEC 60670-1:2002 (MOD) + CORRIGENDUM FEB. 2003 (EQV))
    I.S. EN ISO 4042:1999 FASTENERS - ELECTROPLATED COATINGS
    I.S. EN 13071-2:2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
    CEI EN 50066 : 1997 MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
    BS EN 14592 : 2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
    BS EN 60669-1 : 2000 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    BS EN 61058-1 : 2002 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 61058-1:2002 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 50066:1993 MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES SAFETY REQUIREMENTS FOR RADIO TRANSMITTING EQUIPMENT
    I.S. EN 62271-202:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION
    BS EN 62196-1:2014 (published 2015-01) Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles General requirements
    BS EN 61242 : 1998 ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES
    BS EN 60838-1 : 2017 MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60838-1:2016)
    I.S. EN 60998-2-1:2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-1: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREW-TYPE CLAMPING UNITS
    BS EN 60309-1 : 1999 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 13071-1:2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
    I.S. EN IEC 62688:2018 CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION
    BS EN 60670-1 : 2005 BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    ISO 4042:1999 Fasteners Electroplated coatings
    IEC 60998-2-1:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
    NBR IEC 60998-1 : 2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSE - PART 1: GENERAL REQUIREMENTS
    ISO 10111:2000 Metallic and other inorganic coatings Measurement of mass per unit area Review of gravimetric and chemical analysis methods
    IEC 60669-1 REDLINE : 4ED 2017 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    UNI EN 13071-1 : 2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
    IEC 60838-1:2016+AMD1:2017 CSV Miscellaneous lampholders - Part 1: General requirements and tests
    NFC 61 315 : 2005 PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - 20 A/400 V AND 32 A/400 V SYSTEMS
    BS EN 60320-1:2015 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    18/30365863 DC : 0 BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL
    IEC TR 61916:2017 Electrical accessories - Harmonization of general rules
    I.S. EN 1090-5:2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    17/30363994 DC : 0 BS EN 16662-1 - ROAD VEHICLES - SUPPLEMENTARY GRIP DEVICES FOR TYRES OF PASSENGER CARS AND LIGHT DUTY VEHICLES - PART 1: GENERAL SAFETY AND PERFORMANCE REQUIREMENTS
    BS EN 13071-2 : 2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
    CSA C22.2 No. 61058.1 : 2009 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    EN IEC 62688 : 2018 CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION
    DIN EN ISO 4042:2001-01 FASTENERS - ELECTROPLATED COATINGS
    CSA C22.2 No. 61058.1 : 2009 : R2014 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    NBR 6147 : 1998 ERRATA 2000 PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES - SPECIFICATION
    GOST 9-302 : 1988 ERRATA 2007 UNIFIED SYSTEM OF CORROSION AND AGEING PROTECTION - METAL AND NON-METAL INORGANIC COATINGS - CONTROL METHODS
    EN 60838-1:2017/A1:2017 MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 60838-1:2016/A1:2017)
    CEI EN 62196-1 : 2015 PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
    UNE-EN 61995-1:2010 Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements
    ASTM F 1548 : 2001 : R2006 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
    I.S. ENV 1995-1-1:1995 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
    NF EN 61210 : 2011 CONNECTING DEVICES - FLAT QUICK-CONNECT TERMINATIONS FOR ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS
    NF EN 61534-1 : 2011 AMD 1 2014 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
    IEC 62986:2017 Plugs, socket-outlets and couplers with arcuate contacts
    NF EN 60998-1 : 2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
    ASTM B 767 : 1988 : R2006 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
    ASTM F 1548 : 2001 : R2012 Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
    UNE-EN 60320-1:2016 Appliance couplers for household and similar general purposes - Part 1: General requirements
    EN ISO 4042:1999 FASTENERS - ELECTROPLATED COATINGS (ISO 4042:1999)
    BS EN ISO 4042:2000 FASTENERS - ELECTROPLATED COATINGS
    I.S. EN 62196-1:2014 PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS
    BS EN ISO 10111:2002 METALLIC AND OTHER INORGANIC COATINGS - MEASUREMENT OF MASS PER UNIT AREA - REVIEW OF GRAVIMETRIC AND CHEMICAL ANALYSIS METHODS
    08/30176740 DC : DRAFT JAN 2008 BS EN 61210 - CONNECTING DEVICES - FLAT QUICK-CONNECT TERMINATIONS FOR ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS
    NF EN ISO 4042 : 1999 FASTENERS - ELECTROPLATED COATINGS
    I.S. EN IEC 61730-1:2018 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    I.S. EN ISO 27830:2017 METALLIC AND OTHER INORGANIC COATINGS - REQUIREMENTS FOR THE DESIGNATION OF METALLIC AND INORGANIC COATINGS (ISO 27830:2017)
    BS EN 13071-1:2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
    DIN EN 13071-1:2008-10 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 61058.1 : 2009 : INC : UPD 1 : 2013 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    UNE-EN 62080:2010 Sound signalling devices for household and similar purposes
    ASTM B 767 : 1988 : R1994 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
    ASTM F 1548 : 2001 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
    DIN EN 13071-2:2013-12 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
    DIN EN 28742:1992-10 THIRD-LENGTH CENTRE GROOVED PINS
    I.S. EN 60320-1:2015 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    EN ISO 27830:2017 METALLIC AND OTHER INORGANIC COATINGS - REQUIREMENTS FOR THE DESIGNATION OF METALLIC AND INORGANIC COATINGS (ISO 27830:2017)
    I.S. EN 14592:2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
    ISO 10721-2:1999 Steel structures Part 2: Fabrication and erection
    EN ISO 10111 : 2001 METALLIC AND OTHER INORGANIC COATINGS - MEASUREMENT OF MASS PER UNIT AREA - REVIEW OF GRAVIMETRIC AND CHEMICAL ANALYSIS METHODS
    IEC 60669-2-1:2002+AMD1:2008+AMD2:2015 CSV Switches for household and similar fixed electrical installations -Part 2-1: Particular requirements - Electronic switches
    ASTM B 767 : 1988 : R2016 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
    I.S. EN 61242:1999 ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES
    IEC 61730-1:2016 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction
    I.S. EN 62094-1:2003 INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 60838-1:2017 MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS
    I.S. EN 60155:1996 GLOW-STARTERS FOR FLUORESCENT LAMPS
    IEC 61995-1:2005+AMD1:2016 CSV Devices for the connection of luminaires for household and similarpurposes - Part 1: General requirements
    I.S. EN 61534-1:2011 POWERTRACK SYSTEMS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 14545:2008 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    IEC 60669-1:2017 Switches for household and similar fixed-electrical installations - Part 1: General requirements
    ISO 4520:1981 Chromate conversion coatings on electroplated zinc and cadmium coatings
    I.S. EN 60838-2-1:1997 MISCELLANEOUS LAMPHOLDERS - PART 2: PARTICULAR REQUIREMENTS - SECTION 1: LAMPHOLDERS S14
    IEC 60670-1:2015 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements
    NF EN ISO 5912 : 2011 CAMPING TENTS
    EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    DIN EN ISO 7441:2015-04 CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015)
    CSA C22.2 No. 60320-1 : 2011 : R2016 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    DIN EN 1670:2007-06 Building hardware - Corrosion resistance - Requirements and test methods
    DIN EN 22339:1992-10 UNHARDENED TAPER PINS
    DIN EN 22340:1992-10 CLEVIS PINS WITHOUT HEAD
    DIN EN 1995-1-1 E : 2010 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    DIN EN 28738:1992-10 PLAIN WASHERS FOR CLEVIS PINS - PRODUCT GRADE A
    DIN EN 840-5:2013-02 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
    DIN EN 1995-1-1:2010-12 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (includes Corrigendum AC:2006 + Amendment A1:2008)
    BS EN 840-5:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
    BS EN 12574-2:2017 (published 2017-02) Stationary waste containers Performance requirements and test methods
    BS EN 10230-1 : 2000 STEEL WIRE NAILS - PART 1 - LOOSE NAILS FOR GENERAL APPLICATIONS
    BS EN 1995-1-1 : 2012 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    ISO 14713:1999 Protection against corrosion of iron and steel in structures Zinc and aluminium coatings Guidelines
    BS EN 22340 : 1992 CLEVIS PINS WITHOUT HEAD
    UNE-EN ISO 7441:2015 Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015)
    BS EN 28737 : 1992 TAPER PINS WITH EXTERNAL THREAD, UNHARDENED
    I.S. EN ISO 5912:2011 CAMPING TENTS (ISO 5912:2011)
    IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
    BS EN 28736 : 1992 TAPER PINS WITH INTERNAL THREAD, UNHARDENED
    IEC 61534-1:2011+AMD1:2014 CSV Powertrack systems - Part 1: General requirements
    UNE-EN 62271-202:2015 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation
    BS EN ISO 5912:2011 CAMPING TENTS (ISO 5912:2011)
    ISO 8737:1986 Taper pins with external thread, unhardened
    UNE-EN 62196-1:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
    BS EN 22339 : 1992 TAPER PINS, UNHARDENED
    ISO 8936:2017 Awnings for leisure accommodation vehicles — Requirements and test methods
    BS EN ISO 7384 : 1995 CORROSION TESTS IN ARTIFICIAL ATMOSPHERES - GENERAL REQUIREMENTS
    BS EN 62271-202:2014 High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation
    BS EN ISO 14713 : 1999 PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - ZINC AND ALUMINIUM COATINGS - GUIDELINES
    BS EN 286-4 : 1995 SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - ALUMINIUM ALLOY PRESSURE VESSELS DESIGNED FOR AIR BRAKING EQUIPMENT AND AUXILIARY PNEUMATIC EQUIPMENT FOR RAILWAY ROLLING STOCK
    UNE-EN 12574-2:2017 Stationary waste containers - Part 2: Performance requirements and test methods
    EN ISO 5912:2011 CAMPING TENTS (ISO 5912:2011)
    ISO 14713-1:2017 Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance
    IEC 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
    EN 840-5:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
    UNE-EN 840-5:2013 Mobile waste and recycling containers - Part 5: Performance requirements and test methods
    IEC 60998-2-3:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
    EN 60669-1:2018 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS (IEC 60669-1:2017, MODIFIED)
    BS EN 22341 : 1992 CLEVIS PINS WITH HEAD
    14/30272356 DC : 0 BS EN 60669-1 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    IEC 62080:2001+AMD1:2008+AMD2:2015 CSV Sound signalling devices for household and similar purposes
    BS EN ISO 15465:2004 (published 2004-05) Pipework. Stripwound metal hoses and hose assemblies
    IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
    IEC 61058-2-4:1995+AMD1:2003 CSV Switches for appliances - Part 2-4: Particular requirements for independently mounted switches
    I.S. EN 840-5:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
    ISO 8738:1986 Plain washers for clevis pins Product grade A
    UNE-EN 1995-1-1:2016 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings.
    UNE-EN ISO 5912:2012 Camping tents (ISO 5912:2011)
    IEC 60838-2-1:1994 Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14
    UNE-EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
    ISO 2341:1986 Clevis pins with head
    ISO 15465:2004 Pipework Stripwound metal hoses and hose assemblies
    BS EN 28738 : 1992 PLAIN WASHERS FOR CLEVIS PINS - PRODUCT GRADE A
    BS EN ISO 7441:2015 CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS
    IEC 62094-1:2002 Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements
    IEC 62271-202:2014 High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation
    UNI EN 840-5 : 2013 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
    ISO 7384:1986 Corrosion tests in artificial atmosphere General requirements
    BS EN 1670:2007 Building hardware. Corrosion resistance. Requirements and test methods
    ISO 7441:2015 Corrosion of metals and alloys Determination of bimetallic corrosion in atmospheric exposure corrosion tests
    UNI EN ISO 5912 : 2011 CAMPING TENTS
    IEC 60155:1993 Glow-starters for fluorescent lamps
    IEC 60999-1:1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
    IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV Plugs and socket-outlets for household and similar purposes - Part1: General requirements
    16/30242287 DC : 0 BS EN 62688 - CONCENTRATOR PHOTOVOLTAIC (CPV) MODULE AND ASSEMBLY SAFETY QUALIFICATION
    ISO 5912:2011 Camping tents
    IEC 60998-2-2:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
    ONORM EN 840-5 : 2013 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
    ONORM EN ISO 5912 : 2013 CAMPING TENTS (ISO 5912:2011)
    UL 60320-1 : 2 APPLIANCES COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
    I.S. EN 12574-2:2017 STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
    DIN EN 12574-2:2017-05 STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 7441:2015 CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015)
    IEC 60838-1:2016 RLV Miscellaneous lampholders - Part 1: General requirements and tests
    I.S. EN 1670:2007 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
    DIN EN 22341:1992-10 CLEVIS PINS WITH HEAD
    EN 10230-1 : 1999 STEEL WIRE NAILS - PART 1: LOOSE NAILS FOR GENERAL APPLICATIONS
    EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
    EN 61058-1:2002/A2:2008 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    EN 62080:2009/A2:2015 SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES (IEC 62080:2001/A2:2015)
    DIN EN 1090-5:2017-07 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
    EN 12574-2:2017 Stationary waste containers - Part 2: Performance requirements and test methods
    EN 60998-2-1:2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-1: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREW-TYPE CLAMPING UNITS
    EN 60838-2-1:1996/A2:2004 MISCELLANEOUS LAMPHOLDERS - PART 2: PARTICULAR REQUIREMENTS - SECTION 1: LAMPHOLDERS S14 (IEC 60838-2-1:1994/A2:2004)
    EN 62271-202:2014/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
    EN 60999-1:1993/corrigendum:1997 CONNECTING DEVICES - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS FOR ELECTRICAL COPPER CONDUCTORS
    EN 13071-2:2008/AC:2010 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
    EN 13071-1:2008/AC:2010 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 5912:2013-08 CAMPING TENTS (ISO 5912:2011)
    EN 60309-1:1999/A1:2007/AC:2014 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)
    EN 1090-5:2017 Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
    EN 62094-1:2003/A11:2003 INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    EN 60998-2-2:2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-2: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREWLESS-TYPE CLAMPING UNITS
    EN 60998-1:2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS
    EN 50066 : 1992 MINI-COUPLERS FOR THE INTERCONNECTION OF ELECTRICAL MAINS SUPPLIED EQUIPMENT IN ROAD VEHICLES
    EN 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
    EN 60999-1 : 2000 CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] UP TO 35 MM[2] (INCLUDED)
    DIN EN ISO 15465:2004-07 Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004)
    EN 60155:1995/A2:2007 GLOW-STARTERS FOR FLUORESCENT LAMPS
    EN 62196-1:2014 PLUGS, SOCKET-OUTLETS, VEHICLE CONNECTORS AND VEHICLE INLETS - CONDUCTIVE CHARGING OF ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS (IEC 62196-1:2014, MODIFIED)
    EN 60320-1:2015/AC:2016 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60320-1:2015/COR1:2016)
    EN 1670:2007/AC:2008 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
    EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
    EN ISO 7384 : 1995 CORROSION TEST IN ARTIFICIAL ATMOSPHERE - GENERAL REQUIREMENTS
    EN ISO 15465 : 2004 PIPEWORK - STRIPWOUND METAL HOSES AND HOSE ASSEMBLIES
    EN 28733 : 1992 PARALLEL PINS WITH INTERNAL THREAD, UNHARDENED
    EN 22340 : 1992 CLEVIS PINS WITHOUT HEAD (ISO 2340:1986)
    EN 14545 : 2008 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
    EN ISO 14713-1:2017 ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017)
    EN 28736 : 1992 TAPER PINS WITH INTERNAL THREAD, UNHARDENED (ISO 8736:1986)
    EN 28737 : 1992 TAPER PINS WITH EXTERNAL THREAD, UNHARDENED (ISO 8737:1986)
    EN 22338:1992/AC:1992 PARALLEL PINS, UNHARDENED
    EN ISO 14713 : 1999 PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - ZINC AND ALUMINIUM COATINGS - GUIDELINES
    EN 28738 : 1992 PLAIN WASHERS FOR CLEVIS PINS - PRODUCT GRADE A (ISO 8738:1986)
    EN 22341 : 1992 CLEVIS PINS WITH HEAD (ISO 2341:1986)
    EN ISO 8936:2017 AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017)
    EN 286-4 : 1994 SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 4: ALUMINIUM ALLOY PRESSURE VESSELS DESIGNED FOR AIR BRAKING EQUIPMENT AND AUXILIARY PNEUMATIC EQUIPMENT FOR RAILWAY ROLLING STOCK
    EN 22339 : 1992 TAPER PINS, UNHARDENED (ISO 2339:1986)
    EN ISO 7441:2015 CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015)
    BS 3676-1(2000) : 2000 SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    ONORM EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
    UNI EN 12496 : 2013 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
    UNI EN 1670 : 2007 BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS
    UNI EN 1995-1-1 : 2014 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective