• IEC 60601-2-22:2007+AMD1:2012 CSV

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  03-05-2022

    Language(s):  English - French

    Published date:  26-10-2012

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    201.1 Scope, object and related standards
    201.2 Normative references
    201.3 Terms and definitions
    201.4 General requirements
    201.5 General requirements for testing ME EQUIPMENT
    201.6 Classification of ME EQUIPMENT and ME SYSTEMS
    201.7 ME EQUIPMENT identification, marking and documents
    201.8 Protection against electrical HAZARDS from ME EQUIPMENT
    201.9 Protection against MECHANICAL HAZARDS of ME EQUIPMENT
           and ME SYSTEMS
    201.10 Protection against unwanted and excessive radiation
           HAZARDS
    201.11 Protection against excessive temperatures and other
           HAZARDS
    201.12 Accuracy of controls and instruments and protection
           against hazardous outputs
    201.13 HAZARDOUS SITUATIONS and fault conditions
    201.14 PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS (PEMS)
    201.15 Construction of ME EQUIPMENT
    201.16 ME SYSTEMS
    201.17 Electromagnetic compatibility of ME EQUIPMENT and
           ME SYSTEMS
    Annexes
    Annex D (informative) - Symbols on marking
    Annex AA (informative) - Particular guidance and rationale
    Bibliography
    Index of defined terms used in this particular standard

    Abstract - (Show below) - (Hide below)

    IEC 60601-2-22:2007+A1:2012 applies to the safety and essential performance of laser equipment for either surgical, therapeutic, medical diagnostic, cosmetic, or veterinary applications, intended for its use on humans or animals, classified as a class 3B or class 4 laser product as defined by 3.22 and 3.23 in IEC 60825-1, hereafter referred to as laser equipment. Throughout this International Standard, light emitting diodes (LED) are included whenever the word "laser" is used. This standard can also be applied to surgical, cosmetic, therapeutic and diagnostic laser equipment used for compensation or alleviation of disease, injury or disability. This third edition cancels and replaces the second edition of IEC 60601-2-22, published in 1995. This edition constitutes a technical revision. This third edition takes account of the recently published new editions of the General Standard IEC 60601-1 and publication IEC 60825-1. Additionally, it addresses technical and safety issues which have arisen in the time following the previous second edition.
    This consolidated version consists of the third edition (2007) and its amendment 1 (2012). Therefore, no need to order amendment in addition to this publication.

    General Product Information - (Show below) - (Hide below)

    Committee TC 76
    Development Note Stability Date: 2017. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    AAMI IEC TIR 60878 : 2003 GRAPHICAL SYMBOLS FOR ELECTRICAL EQUIPMENT IN MEDICAL PRACTICE
    DIN EN ISO 11990-2:2016-02 LASERS AND LASER-RELATED EQUIPMENT - DETERMINATION OF LASER RESISTANCE OF TRACHEAL TUBES - PART 2: TRACHEAL TUBE CUFFS (ISO 11990-2:2010)
    PD IEC/TR 60878:2015 Graphical symbols for electrical equipment in medical practice
    I.S. EN ISO 11810-2:2009 LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION
    02/712047 DC : DRAFT OCT 2002 ISO 11810-2 - OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER RELATED EQUIPMENT - TEST METHODS AND CLASSIFICATION FOR LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - SECONDARY IGNITION
    12/30258880 DC : 0 BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
    07/30157980 DC : 0 BS EN 60601-2-58 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-58: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF LENS REMOVAL AND VITRECTOMY DEVICES FOR OPHTHALMIC SURGERY
    04/30112949 DC : DRAFT APR 2004 IEC 60825-8 ED.2 - SAFETY OF LASER PRODUCTS - PART 8: GUIDELINES FOR THE USE OF MEDICAL LASER EQUIPMENT
    DIN EN ISO 11990-1:2016-02 LASERS AND LASER-RELATED EQUIPMENT - DETERMINATION OF LASER RESISTANCE OF TRACHEAL TUBES - PART 1: TRACHEAL TUBE SHAFT (ISO 11990-1:2011)
    BS EN ISO 11990:2003 Optics and optical instruments. Lasers and laser-related equipment. Determination of laser resistance of tracheal tube shafts
    AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    ISO 11990-2:2010 Lasers and laser-related equipment Determination of laser resistance of tracheal tubes Part 2: Tracheal tube cuffs
    BS EN ISO 11810-1:2009 Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers Primary ignition and penetration
    EN 80601-2-58:2015 Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
    PD IEC TR 60825-14:2004 Safety of laser products A user\'s guide
    ANSI Z80.11:2012 OPHTHALMICS - LASER SYSTEMS FOR CORNEAL RESHAPING
    11/30193150 DC : 0 BS EN 60601-1:2006 AMD.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    UNI EN ISO 11810-2 : 2009 LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION
    PD ISO/TR 20824:2007 Ophthalmic instruments. Background for light hazard specification in ophthalmic instrument standards
    I.S. EN 80601-2-60:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT
    ANSI/AAMI/IEC 80601-2-58:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-58: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF LENS REMOVAL AND VITRECTOMY DEVICES FOR OPHTHALMIC SURGERY
    AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    DIN EN 1640:2010-02 Dentistry - Medical devices for dentistry - Equipment
    DIN EN ISO 11553-1:2009-03 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
    ISO/IEEE 11073-10418:2014 Health informatics — Personal health device communication — Part 10418: Device specialization — International Normalized Ratio (INR) monitor
    BS EN 1640:2009 Dentistry. Medical devices for dentistry. Equipment
    ISO 11990-1:2011 Lasers and laser-related equipment Determination of laser resistance of tracheal tubes Part 1: Tracheal tube shaft
    BS EN 60825-1:2014 Safety of laser products Equipment classification and requirements
    UNI EN ISO 11553-1 : 2009 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
    DIN EN ISO 11810-1:2009-07 LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PART 1: PRIMARY IGNITION AND PENETRATION
    I.S. EN 1640:2009 DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - EQUIPMENT
    EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
    DIN EN ISO 11810-2:2009-07 LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION
    I.S. EN ISO 11810:2015 LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PRIMARY IGNITION, PENETRATION, FLAME SPREAD AND SECONDARY IGNITION (ISO 11810:2015)
    02/712046 DC : DRAFT OCT 2002 ISO 11810-1 - OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER RELATED EQUIPMENT - TEST METHODS AND CLASSIFICATION FOR LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PRIMARY IGNITION
    BS EN ISO 11990-2:2014 Lasers and laser-related equipment. Determination of laser resistance of tracheal tubes Tracheal tube cuffs
    08/30170762 DC : DRAFT OCT 2008 BS ISO 11990-2 - LASERS AND LASER-RELATED EQUIPMENT - DETERMINATION OF LASER RESISTANCE OF TRACHEAL TUBES - PART 2: TRACHEAL TUBE CUFFS
    14/30298220 DC : 0 BS EN ISO 11810 - LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PRIMARY IGNITION, PENETRATION, FLAME SPREAD AND SECONDARY IGNITION
    17/30327513 DC : DRAFT APR 2017 BS EN ISO 11990 - LASERS AND LASER-RELATED EQUIPMENT - DETERMINATION OF LASER RESISTANCE OF TRACHEAL TUBE SHAFT AND TRACHEAL CUFFS
    PD IEC/TR 60825-8:2006 Safety of laser products Guidelines for the safe use of laser beams on humans
    NF EN 80601-2-60 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT
    BS EN ISO 11073-10418:2014 Health informatics. Personal health device communication Device specialization. International Normalized Ratio (INR) monitor
    CSA C22.2 No. 80601-2-60 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT
    ISO/TR 20824:2007 Ophthalmic instruments Background for light hazard specification in ophthalmic instrument standards
    I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    IEC TR 60878:2015 Graphical symbols for electrical equipment in medical practice
    PD IEC/TR 60601-4-3:2015 Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements
    EN 16844:2017 Aesthetic medicine services - Non-surgical medical treatments
    IEC 60601-2-75:2017 Medical electrical equipment - Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment
    UNE-EN 60825-1:2015 Safety of laser products - Part 1: Equipment classification and requirements
    I.S. EN 60825-1:2014 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
    UNI EN 1640 : 2010 DENTISTRY - MEDICAL DEVICES FOR DENTISTRY - EQUIPMENT
    UNI EN ISO 11810-1 : 2009 LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PART 1: PRIMARY IGNITION AND PENETRATION
    IEC TR 60825-8:2006 Safety of laser products - Part 8: Guidelines for the safe use of laser beams on humans
    BS EN 80601-2-60:2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of dental equipment
    UNE-EN ISO 11990-1:2012 Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft (ISO 11990-1:2011)
    CEI 76-6 : 2012 SAFETY OF LASER PRODUCTS - PART 8: GUIDELINES FOR THE SAFE USE OF LASER BEAMS ON HUMANS
    ANSI Z80.11 : 2012 : R2017 OPHTHALMICS - LASER SYSTEMS FOR CORNEAL RESHAPING
    I.S. EN 16844:2017+A2:2019 Aesthetic medicine services - Non-surgical medical treatments
    I.S. EN ISO 11990:2003 OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - DETERMINATION OF LASER RESISTANCE OF TRACHEAL TUBE SHAFTS
    CEI EN 80601-2-60 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-60: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF DENTAL EQUIPMENT
    EN ISO 11990:2003 Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts (ISO 11990:2003)
    I.S. EN ISO 11990-2:2014 LASERS AND LASER-RELATED EQUIPMENT - DETERMINATION OF LASER RESISTANCE OF TRACHEAL TUBES - PART 2: TRACHEAL TUBE CUFFS (ISO 11990-2:2010)
    BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    EN ISO 11553-1:2008 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
    I.S. EN ISO 11553-1:2008 SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
    IEC 80601-2-60:2012 Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
    IEC 80601-2-58:2014+AMD1:2016 CSV Medical electrical equipment - Part 2-58: Particular requirementsfor the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
    ISO 11553-1:2005 Safety of machinery Laser processing machines Part 1: General safety requirements
    EN 80601-2-60:2015 Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
    ISO 11810-1:2005 Lasers and laser-related equipment Test method and classification for the laser resistance of surgical drapes and/or patient protective covers Part 1: Primary ignition and penetration
    ISO/IEEE 11073-10406:2012 Health informatics — Personal health device communication — Part 10406: Device specialization — Basic electrocardiograph (ECG) (1- to 3-lead ECG)
    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    ISO 11810-2:2007 Lasers and laser-related equipment Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers Part 2: Secondary ignition
    BS EN ISO 11810-2:2009 Lasers and laser-related equipment. Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers Secondary ignition
    EN ISO 11810-2:2009 Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition (ISO 11810-2:2007)
    EN ISO 11810:2015 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015)
    EN ISO 11990-1:2014 Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft (ISO 11990-1:2011)
    EN 1640:2009 Dentistry - Medical devices for dentistry - Equipment
    EN ISO 11990-2:2014 Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 2: Tracheal tube cuffs (ISO 11990-2:2011)
    EN ISO 11073-10406:2012 Health informatics - Personal health device communication - Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) (ISO/IEEE 11073-10406:2012)
    EN ISO 11810-1:2009 Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration (ISO 11810-1:2005)
    I.S. EN ISO 11810-1:2009 LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PART 1: PRIMARY IGNITION AND PENETRATION
    14/30302355 DC : 0 BS EN ISO 11553-1 ED.2 - SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS
    CEI 76-11 : 2011 SAFETY OF LASER PRODUCTS - PART 14: A USER'S GUIDE
    BS EN ISO 11073-10406:2012 Health informatics. Personal health device communication Device specialization. Basic electrocardiograph (ECG) (1- to 3-lead ECG)
    I.S. EN ISO 11073-10406:2012 HEALTH INFORMATICS - PERSONAL HEALTH DEVICE COMMUNICATION - PART 10406: DEVICE SPECIALIZATION - BASIC ELECTROCARDIOGRAPH (ECG) (1- TO 3-LEAD ECG) (ISO/IEEE 11073-10406:2012)
    13/30271473 DC : 0 BS EN 80601-2-58 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-58: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF LENS REMOVAL DEVICES AND VITRECTOMY DEVICES FOR OPHTHALMIC SURGERY
    ISO 11990:2003 Optics and optical instruments Lasers and laser-related equipment Determination of laser resistance of tracheal tube shafts
    I.S. EN 16844:2017 AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL PROCEDURES
    BS IEC 60825-8:1999 Safety of laser products Guidelines for the safe use of medical laser equipment
    BS EN 80601-2-58:2015 Medical electrical equipment Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
    CSA C22.2 No. 80601-2-58 : 2010 MEDICAL ELECTRICAL EQUIPMENT - PART 2-58: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF LENS REMOVAL DEVICES AND VITRECTOMY DEVICES FOR OPHTHALMIC SURGERY
    BS EN ISO 11990-1:2014 Lasers and laser-related equipment. Determination of laser resistance of tracheal tubes Tracheal tube shaft
    UNI EN ISO 11073-10406 : 2013 HEALTH INFORMATICS - PERSONAL HEALTH DEVICE COMMUNICATION - PART 10406: DEVICE SPECIALIZATION - BASIC ELECTROCARDIOGRAPH (ECG) (1- TO 3-LEAD ECG)
    I.S. EN ISO 11990-1:2014 LASERS AND LASER-RELATED EQUIPMENT - DETERMINATION OF LASER RESISTANCE OF TRACHEAL TUBES - PART 1: TRACHEAL TUBE SHAFT (ISO 11990-1:2011)
    I.S. EN ISO 11073-10418:2014 HEALTH INFORMATICS - PERSONAL HEALTH DEVICE COMMUNICATION - PART 10418: DEVICE SPECIALIZATION: INTERNATIONAL NORMALIZED RATIO (INR) MONITOR (ISO/IEEE 11073-10418:2014, CORRECTED VERSION 2014-05-01)
    CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    BS EN 16844 : 2017 AESTHETIC MEDICINE SERVICES - NON-SURGICAL MEDICAL TREATMENTS
    IEC TR 60825-14:2004 Safety of laser products - Part 14: A user's guide
    I.S. EN 80601-2-58:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-58: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF LENS REMOVAL DEVICES AND VITRECTOMY DEVICES FOR OPHTHALMIC SURGERY
    EN ISO 11073-10418:2014/AC:2016 Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor - Technical Corrigendum 1 (ISO/IEEE 11073-10418:2014/Cor 1:2016)
    BS EN ISO 11810:2015 Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Primary ignition, penetration, flame spread and secondary ignition
    BS EN ISO 11553-1:2008 Safety of machinery. Laser processing machines General safety requirements
    ISO 11810:2015 Lasers and laser-related equipment Test method and classification for the laser resistance of surgical drapes and/or patient protective covers Primary ignition, penetration, flame spread and secondary ignition
    IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
    DIN EN ISO 11810:2016-06 LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PRIMARY IGNITION, PENETRATION, FLAME SPREAD AND SECONDARY IGNITION (ISO 11810:2015)

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
    IEC TR 60825-14:2004 Safety of laser products - Part 14: A user's guide
    IEC 60664-3:2016 Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
    IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
    IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective