A-A-59950 Base Document:2014
NA
Status of Standard is Unknown
HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 BODY, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. CLASSIFICATION/PART IDENTIFICATION NUMBER (PIN)
3. SALIENT CHARACTERISTICS
4. REGULATORY REQUIREMENTS
5. PRODUCT CONFORMANCE PROVISIONS
6. PACKAGING
7. NOTES
Specifies the general requirements for a family of 7 piece wedge card holders for holding circuit card assemblies (CCA) into their installed positions when used in heat sinking devices (cold plates, heat exchanger) or other applications.
| Committee |
FSC 5998
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
NA
|
| MIL-HDBK-1861 Revision B:2013 | Selection and Use1 of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware |
| A-A-59950-3 Base Document:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 PIECE, FOR COLD PLATE APPLICATIONS, .250 X .260 INCH (6.35 X 6.60 MM) BODY SIZE, SCREW ACTUATED SHAFT |
| A-A-59950-4 Base Document:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 PIECE, FOR COLD PLATE APPLICATIONS, .250 X .260 INCH (6.35 X 6.60 MM) BODY SIZE, SCREW ACTUATED SHAFT, WITH VISUAL LOCK INDICATION |
| A-A-59950-1 Base Document:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .225 INCH (5.72 X 5.72 MM) BODY SIZE, SCREW ACTUATED SHAFT |
| A-A-59950-2 Base Document:2014 | HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 PIECE, FOR COLD PLATE APPLICATIONS, .225 X .225 INCH (5.72 X 5.72 MM) BODY SIZE, SCREW ACTUATED SHAFT, WITH VISUAL LOCK INDICATION |
| MIL-DTL-5002 Revision E:2011 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| NAS620:2013 | WASHER, FLAT, REDUCED OUTSIDE DIAMETER |
| SAE AMSQQA200/8A | Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded A96061 |
| SAE AMSQQN290C | Nickel Plating (Electrodeposited) |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| NASM 21043 : 2003 | NUT, SELF-LOCKING, 800 DEGREES F, REDUCED HEXAGON, REDUCED HEIGHT, RING BASE, CRES |
| SAE AMS5904B | Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength |
| NAS1283:2014 | FASTENERS, MALE THREADED, SELF-LOCKING |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| NAS1676:2015 | WASHER, LOCK, SPRING, HELICAL, HI-COLLAR |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| ASTM B 194 : 2015 : REDLINE | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| MIL-DTL-18240 Revision F:1997 | FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM |
| NASM35338:2013 | WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES |
| SAE AMSC26074D | Electroless Nickel Coatings |
| MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.