• There are no items in your cart

AN846 Revision 9:2013

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

ELBOW, HOSE, 45 DEGREES

Available format(s)

PDF

Superseded date

12-03-2020

Language(s)

English

Committee
FSC 4730
DevelopmentNote
Inactive for New Design. (09/2000)
DocumentType
Standard
Pages
8
PublisherName
US Military Specs/Standards/Handbooks
Status
Superseded
SupersededBy

SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
SAE AMS QQ A 225/9 : 2014 ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED
SAE AS 611F : 2010 HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
SAE AMS QQ P 416 : 2016 PLATING, CADMIUM (ELECTRODEPOSITED)
SAE AMS 4133 : 2014 ALUMINUM ALLOY FORGINGS AND ROLLED RINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T6), SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS 2488 : 2000 ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
SAE AS 4843 : 2016 FITTINGS, BEADED, FLUID CONNECTION
SAE AMS 4141 : 2014 ALUMINUM ALLOY DIE FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73), SOLUTION AND PRECIPITATION HEAT TREATED
ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AMS 5648 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 17CR - 12NI - 2.5MO (316), SOLUTION HEAT TREATED
SAE AMS QQ A 367 : 2012 ALUMINUM ALLOY FORGINGS
MIL-DTL-83488 Revision D:1999 COATING, ALUMINUM, HIGH PURITY
SAE AS 5187 : 2017 FITTING, ELBOW, 45 DEGREES, BULKHEAD, HOSE
SAE AMS QQ S 763D : 2013(S2015) STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
SAE AS 8879 : 2004 SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
SAE ARP 1590 : 2014 RECOMMENDED PART NUMBERING GUIDELINES FOR FLUID SYSTEM COMPONENTS INCH SYSTEM OF MEASUREMENTS
MIL A 8625 : F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS 2472 : 2014 ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, DYED COATING
SAE AMS 2700E : 2011 PASSIVATION OF CORROSION RESISTANT STEELS
SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
SAE AS 5132 : 2015 FITTING END - HOSE CONNECTION, DESIGN STANDARD
SAE AMS QQ A 225/6 : 1998 ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED
SAE AMS 4339 : 2004 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED
SAE AMS 4124 : 2012 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED

€18.33
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.