ANSI H35.2M : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
DIMENSIONAL TOLERANCES FOR ALUMINUM MILL PRODUCTS (METRIC)
Available format(s)
Hardcopy , PDF
Superseded date
25-09-2020
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.Includes updated illustrations, removal of footnote 1, changes to the list of definitions, the addition of the definition of applicable limits, edits to the definition of mean wall thickness, editorial corrections and clarification to table headings and footnotes.
| DevelopmentNote |
Supersedes SAE MAM 2202, SAE MAM 2204 and SAE MAM 2205. (07/1999) Supersedes MIL A 52174. (05/2004)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
Aluminum Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS4140K | ALUMINUM ALLOY DIE FORGINGS, 4.0CU - 2.0NI - 0.68MG (2018-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4069F | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING, CLOSE TOLERANCE, 2.5MG - 0.25CR (5052-0) ANNEALED |
| SAE AMS 4272 : 2015 | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE (ALCLAD 2029-T8) 3.6 CU, 0.30 MN, 0.95 MG, 0.40 AG, 0.12 ZR SOLUTION HEAT TREATED, COLD WORKED AND AGED |
| ASTM B 317/B317M : 2007 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 234M : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
| SAE AMS 4332 : 2012 | ALUMINUM ALLOY, EXTRUDED PROFILES (7349-T76511) 8.1ZN - 1.7CU - 2.2MG - 0.16ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS4295D | ALUMINUM ALLOY SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR (2219 - O, F, T31, T351, T37, T81, T851, T87) |
| SAE AMS4306C | ALUMINUM ALLOY, PLATE, 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T6151), SOLUTION HEAT TREATED, STRESS RELIEVED, AND AGED |
| SAE AMS4083L | ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4401 : 2011 | ALUMINUM ALLOY PLATE (7140-T7451), 6.6ZN - 1.8CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED (COMPOSITION SIMILAR TO UNS A97140) |
| SAE AMS4126C | ALUMINUM ALLOY, DIE AND HAND FORGINGS AND ROLLED RINGS - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7079-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4182H | ALUMINUM ALLOY, WIRE, 5.0MG - 0.12MN - 0.12CR (5056-0), ANNEALED |
| SAE AMS 4405 : 2012 | ALUMINUM ALLOY, ALCLAD SHEET (6156-T4), 1.0SI - 0.90CU - 0.60MN - 0.90MG, SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS4184G | FILLER METAL, ALUMINUM BRAZING, 10SI - 4.0CU (4145) |
| SAE AMS4046G | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD ONE SIDE 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD ONE SIDE 7075; -T6 SHEET -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4465 : 2015 | ALUMINUM ALLOY, CLAD ONE SIDE SHEET, 0.6MG - 0.35SI - 0.28CU (NO. 23 BRAZING SHEET), AS FABRICATED |
| SAE AMS 4203 : 2012 | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7351) SOLUTION HEAT TREATED, STRESS RELIEVED AND PRECIPITATION HEAT TREATED (COMPOSITION SIMILAR TO UNS A97010) |
| SAE AMS4064F | ALUMINUM ALLOY, CLAD TWO SIDES SHEET, 1.25MN - 0.12CU (NO. 12-0 BRAZING SHEET), ANNEALED |
| SAE AMS 4299 : 2018 | ALUMINUM ALLOY, PLATE (7449-T7951), 8.1ZN - 1.8CU - 2.3MG SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4324 : 2016 | ALUMINUM ALLOY, EXTRUDED ROD, BAR AND PROFILES (7055-T74511), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| FED-STD-245 Revision E:1985 | TOLERANCES FOR ALUMINUM ALLOY AND MAGNESIUM ALLOY WROUGHT PRODUCTS |
| SAE AMS4330C | ALUMINUM ALLOY, PLATE (2297-T87), 2.8CU - 1.5LI - 0.30MN - 0.12ZR, SOLUTION HEAT TREATED, STRETCHED, AND ARTIFICIALLY AGED |
| SAE AMS 4416 : 2017 | ALUMINUM ALLOY, EXTRUDED PROFILES (2196-T8511) 2.9CU - 1.7LI - 0.4MG - 0.4AG - 0.10ZR SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND ARTIFICIALLY AGED |
| SAE AMS4276B | ALUMINUM ALLOY, SHEET - 4.4CU - 1.5MG - 0.60MN (2024-O) ANNEALED, FINE GRAINED |
| SAE AMS4077H | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE, 4.4CU - 1.5MG - 0.60MN (CLAD ONE SIDE 2024-O), ANNEALED |
| SAE AMS 4473 : 2017 | ALUMINUM ALLOY PLATE (2624-T39), 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4462 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T3 SHEET, -T351 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS4015M | ALUMINUM ALLOY, SHEET AND PLATE 2.5MG - 0.25CR (5052-O) ANNEALED |
| SAE AMS4162E | ALUMINUM ALLOY, EXTRUSIONS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T8511), SOLUTION TREATED, STRESS RELIEF STRETCHED, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4365 : 2017 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.2CU - 2.1MG - 0.10ZR (7097-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS4345B | ALUMINUM ALLOY, EXTRUSIONS - 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T77511) SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS4133E | ALUMINUM ALLOY FORGINGS AND ROLLED RINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4374 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES, 8.9ZN - 2.2CU - 2.2MG - 0.15ZR (7136-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMS4344D | ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4353 : 2014 | ALUMINUM ALLOY, EXTRUDED ROUND ROD, 3.5CU - 1.0LI - 0.40MG - 0.45AG - 0.12ZR (2050-T84) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND ARTIFICIALLY AGED |
| SAE AMS4350N | MAGNESIUM ALLOY, EXTRUSIONS 6.5A1 - 0.95ZN (AZ61A-F) AS EXTRUDED |
| SAE AMS 4357 : 2016 | ALUMINUM ALLOY, DIE FORGINGS 3.5CU - 1.0LI - 0.04MG - 0.35MN - 0.45AG - 0.12ZR (2050-T852) SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4213 : 2016 | ALUMINUM ALLOY PLATE (2027-T351) 4.4CU - 1.2MG - 0.8MN - 0.10ZR, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4268 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN; (2024-T81 SHEET, -T851 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4601 : 2017 | Aluminum Alloy, Sheet and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351) |
| SAE AMS 4415 : 2015 | ALUMINUM ALLOY EXTRUSIONS, 8.9ZN - 2.2CU - 2.2MG - 0.15ZR (7136-T76511, -T76510) SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4459 : 2013 | ALUMINUM ALLOY, EXTRUSION, 2.7CU - 1.8LI - 0.7ZN - 0.3MN - 0.3MG - 0.08ZR (2099-T81), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 1 TO 3% AND AGED |
| SAE AMS4044N | ALUMINUM ALLOY, SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, ANNEALED (7075-O), OR WHEN SPECIFIED, 'AS FABRICATED' (7075-F) |
| SAE AMS4096D | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (ALCLAD 2219-O), ANNEALED |
| SAE AMS 4287 : 2013 | ALUMINUM ALLOY, EXTRUSION, 2.7 CU - 1.8 LI - 0.7 ZN - 0.3 MN - 0.3 MG - 0.08 ZR (2099-T83), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 1% TO 4% AND AGED |
| ASTM B 317/B317M : 2007 : R2015 : EDT 1 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 491/B491M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications |
| ASTM B 317/B317M : 2007 : R2015 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM B 316/B316M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| SAE AMS 4468 : 2012 | ALUMINUM ALLOY, PLATE, 5.0CU - 0.4MN - 0.5MG - 0.4AG (2139-T84), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED (COMPOSITION SIMILAR TO UNS A92139) |
| SAE AMS4035M | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-0) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F) |
| SAE AMS4113F | ALUMINUM ALLOY, EXTRUDED PROFILES 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4315 : 2017 | ALUMINUM ALLOY SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T76 SHEET, -T7651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4066C | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI - (2219-T8511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND PRECIPITATION HEAT TREATED |
| SAE AMS4116J | ALUMINUM ALLOY, BARS, RODS, AND WIRE, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T4), COLD FINISHED, SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS4172F | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4511 OR T4510) SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS4274A | ALUMINUM ALLOY, ALCLAD SHEET, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024-0), ANNEALED, FINE GRAIN |
| SAE AMS 4466 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T361 SHEET & PLATE), SOLUTION HEAT TREATED, 6% COLD WORKED AND NATURALLY AGED |
| AASHTO M 197 : 2006 | SPECIFICATION FOR ALUMINUM ALLOY SHEET FOR CORRUGATED ALUMINUM PIPE |
| SAE AMS4256C | ALUMINUM ALLOY, CLAD TWO SIDES SHEET - 0.6MG - 0.35SI - 0.28CU (NO. 22 BRAZING SHEET) AS FABRICATED |
| SAE AMS 4269 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN; (2024-T361), SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS4341E | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND OVERAGED |
| SAE AMS4303C | ALUMINUM ALLOY PLATE, 2.7CU - 2.2LI - 0.12ZR (2090-T81), SOLUTION HEAT TREATED, COLD WORKED, AND AGED |
| SAE AMS4296C | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE 4.3CU - 1.4MG - 0.60MN (ALCLAD 2524-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS 4351 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7651) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS4081J | ALUMINUM ALLOY TUBING, HYDRAULIC, SEAMLESS, DRAWN, ROUND, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS 4476 : 2013 | ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-O), ANNEALED |
| SAE AMS 4409 : 2013 | ALUMINUM ALLOY, PLATE, 4.0ZN - 2.0MG - 0.32MN (7019-T651), SOLUTION HEAT TREATED, STRESS RELIEVED AND ARTIFICIALLY AGED |
| SAE AMS4148F | ALUMINUM ALLOY DIE FORGINGS (7175-T66) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4094D | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI ALCLAD 2219-T81 SHEET SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED ALCLAD 2219-T851 PLATE SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4361 : 2014 | ALUMINUM ALLOY, PLATE (7065-T7451) 7.7ZN - 2.1CU - 1.65MG - 0.10ZR SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS4128D | ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T451), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4469 : 2013 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, 1.8 CU - 1.0 MG - 0.8 SI - 0.20 CR, SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED (2013-T4511) |
| SAE AMS 4617 : 2017 | ALUMINUM ALLOY, EXTRUSIONS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T73, 7075-T73511, 7075-T73510), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED, AND OVERAGED |
| SAE AMS4208C | ALUMINUM ALLOY SHEET, 6.0CU - 0.40ZR - (2004-F), AS ROLLED |
| SAE AMS4121J | ALUMINUM ALLOY BARS, RODS, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6, -T651), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4048P | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (ALCLAD 7075-F) |
| SAE AMS4050J | ALUMINUM ALLOY, PLATE, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7451), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS4202D | ALUMINUM ALLOY, PLATE - 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| SAE AMS4111E | ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7049-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4298 : 2016 | ALUMINUM ALLOY, ALCLAD SHEET 3.8CU - 1.0MG - 0.30MN - 0.60ZN (ALCLAD 2056-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS4216B | ALUMINUM ALLOY, SHEET, 1.0MG - 0.8SI - 0.8CU - 0.50MN, (6013-T6), SOLUTION HEAT TREATED AND ARTIFICIALLY AGED |
| SAE AMS4320B | ALUMINUM ALLOY FORGINGS, 7.7ZN - 2.5MG - 1.5CU - 0.16CR (7149-T73), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4194E | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024 -T361 SHEET/PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, 6% COLD WORKED AND NATURALLY AGED |
| ASTM B 236M : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024) |
| SAE AMS 4464 : 2017 | ALUMINUM ALLOY PLATE (2624-T351) 4.1CU - 1.4MG - 0.6MN, SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4329 : 2017 | ALUMINUM ALLOY, PLATE (7085-T7651), 7.5ZN - 1.6CU - 1.5MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS4036L | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD ONE SIDE 4.4CU - 1.5MG - 0.60MN ALCLAD ONE SIDE 2024 AND 1-1/2% ALCLAD ONE SIDE 2024-T3 SHEET; 1-1/2% ALCLAD ONE SIDE 2024-T351 PLATE |
| SAE AMS4143E | ALUMINUM ALLOY FORGINGS AND ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4204C | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7651), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4257 : 2014 | ALUMINUM ALLOY, EXTRUSION 3.7CU - 1.15LI - 0.5ZN - 0.45AG - 0.4MG - 0.3MN - 0.1ZR (2055-T84) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING 2% TO 5% AND AGED |
| ASTM B 211M : 2012 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) (Withdrawn 2019) |
| ASTM B 236M : 2007 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric] |
| SAE AMS 4472 : 2017 | ALUMINUM ALLOY, PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS4319B | ALUMINUM ALLOY, ROLLED OR COLD FINISHED, BARS AND RODS 12.2SI - 1.0MG - 0.90CU - 0.90NI (4032-T651) SOLUTION HEAT TREATED, STRESS-RELIEVED, AND ARTIFICIALLY AGED |
| SAE AMS 4403 : 2017 | ALUMINUM ALLOY, DIE FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4410 : 2013 | ALUMINUM ALLOY PLATE (7081-T7451), 7.2ZN - 1.5CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED |
| SAE AMS4115J | ALUMINUM ALLOY, ROLLED OR COLD-FINISHED, BARS, RODS, WIRE, AND FLASH WELDED RINGS, ANNEALED, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) |
| SAE AMS4078J | ALUMINUM ALLOY SHEET AND PLATE, 5.6ZN - 2.5MG - 1.6CU - 0.23CR, 7075: (-T73 SHEET, -T7351 PLATE), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4458 : 2016 | ALUMINUM ALLOY, PLATE (2.7 CU - 1.8 LI - 0.7 ZN) 2099-T86, SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS4278B | ALUMINUM ALLOY, ALCLAD SHEET 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075-0) ANNEALED, FINE GRAINED |
| SAE AMS4173F | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T6511 OR T6510) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4325 : 2013 | ALUMINUM ALLOY, EXTRUDED WIDE PANEL PROFILES (7150-T77511), 6.4ZN - 2.4MG - 2.2CU - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED AND OVERAGED |
| SAE AMS4200C | ALUMINUM ALLOY PLATE, 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS4277B | ALUMINUM ALLOY, SHEET - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-O) ANNEALED, FINE GRAINED |
| SAE AMS 4412 : 2015 | ALUMINUM ALLOY, SHEET, 3.2CU - 0.52MG - 0.30AG - 0.12ZR (2198-T8), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS4339B | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 4.4CU - 1.5MG - 0.60MN (2024-T-851) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS4343D | ALUMINUM ALLOY, EXTRUSIONS, 7.7ZN - 2.4MG - 1.6CU - 0.16CR, (7149-T73511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
| SAE AMS4252B | ALUMINUM ALLOY, PLATE - 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T7751), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS4154R | ALUMINUM ALLOY, EXTRUSIONS 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6, 7075-T6510, 7075-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING WHEN REQUIRED AND PRECIPITATION HEAT TREATED |
| SAE AMS4079H | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS, TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O), CLOSE TOLERANCE, ANNEALED |
| SAE AMS4186D | ALUMINUM ALLOY, BARS, RODS, AND WIRE, ROLLED OR COLD FINISHED, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-F), AS FABRICATED OR WHEN SPECIFIED, ANNEALED (7075-O) |
| SAE AMS4193D | ALUMINUM ALLOY SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024-T861), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4002 : 2018 | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN 1.8CU - 1.0MG - 0.8SI - 0.20CR SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED (2013-T6511) |
| SAE AMS 4293 : 2013 | ALUMINUM ALLOY EXTRUSIONS, 7.9ZN - 1.6CU - 2.2MG - 0.16CR (7249-T76511), SOLUTION HEAT TREATED, STRESS-RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4183 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES (2027-T3511) 4.4CU - 1.2MG - 0.8MN - 0.10ZR, SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS4209C | ALUMINUM ALLOY SHEET, ALCLAD, 6.0CU - 0.40ZR - (2004-F), AS ROLLED |
| SAE AMS 4331 : 2014 | ALUMINUM ALLOY EXTRUSIONS 7.8ZN - 2.6MG - 2.0CU - 0.10ZR - (7068-T6511) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS4070N | ALUMINUM ALLOY, DRAWN, ROUND SEAMLESS TUBING, 2.5MG - 0.25CR (5052-O), ANNEALED |
| SAE AMS4027N | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6 SHEET, -T651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4160H | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
| SAE AMS4251B | ALUMINUM ALLOY SHEET, 2.7CU - 2.2LI - 0.12ZR (2090-T83), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4411 : 2013 | ALUMINUM ALLOY PLATE (7081-T7651), 7.2ZN - 1.5CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED AND OVERAGED |
| SAE AMS4045L | ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4479 : 2015 | ALUMINUM ALLOY, EXTRUDED PROFILES (2824-T3511) 4.0CU - 1.35MG - 0.7MN SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS4127J | ALUMINUM ALLOY, FORGINGS AND ROLLED OR FORGED RINGS, (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4463 : 2017 | ALUMINUM ALLOY, PLATE (7255-T7751) 8.0ZN - 2.3CU - 2.0MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS4084E | ALUMINUM ALLOY SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4026M | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T4 SHEET, -T451 PLATE), SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS4101F | ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T851), SOLUTION HEAT TREATED, STRETCHED, AND PRECIPITATION HEAT TREATED |
| SAE AMS4017L | ALUMINUM ALLOY SHEET AND PLATE, 2.5MG - 0.25CR, (5052-H34), STRAIN-HARDENED, HALF-HARD, AND STABILIZED |
| SAE AMS 4371 : 2015 | MAGNESIUM ALLOY, PLATE, 4.0Y - 2.25ND - 0.5ZR (WE43C - T5), PRECIPITATION HEAT TREATED |
| SAE AMS4130N | ALUMINUM ALLOY DIE FORGINGS, 4.4CU - 0.85SI - 0.80MN (2025-T6), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4327 : 2016 | ALUMINUM ALLOY, PLATE (2098-O), 3.5CU - 1.1LI - 0.50MG - 0.40AG - 0.11ZR, ANNEALED |
| SAE AMS4157E | ALUMINUM ALLOY EXTRUSIONS, 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T73511), SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS4165H | ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
| SAE AMS4122L | ALUMINUM ALLOY BARS, RODS, AND WIRE ROLLED OR COLD FINISHED, AND RINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T6, 7075-T651), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4255B | ALUMINUM ALLOY, CLAD ONE SIDE SHEET - 0.6MG - 0.35SI - 0.28CU (NO. 21 BRAZING SHEET) AS FABRICATED |
| SAE AMS4205D | ALUMINUM ALLOY, PLATE 6.2ZN - 1.8CU - 2.4MG - 0.13ZR (7010-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS4347D | ALUMINUM ALLOY SHEET, 1.0MG - 0.8SI - 0.8CU - 0.5MN (6013-T4), SOLUTION HEAT TREATED AND NATURALLY AGED |
| ASTM B 744/B744M : 2015 : REDLINE | Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe |
| SAE AMS 4354 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4414 : 2013 | ALUMINUM ALLOY, HAND FORGINGS, 7.5ZN - 1.6CU - 1.5MG - 0.12ZR (7085-T7452), SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS4090F | ALUMINUM ALLOY, PLATE 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS4159E | ALUMINUM ALLOY, EXTRUSIONS 7.7ZN - 2.4MG - 1.6CU - 0.16CR (7049-T76511) SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4599 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION AND PRECIPITATION HEAT TREATED (2219 -T81/-T851) |
| ASTM B 928/B928M : 2015 : REDLINE | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
| ASTM B 483/B483M : 2013 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications |
| SAE AMS4232C | ALUMINUM ALLOY EXTRUSIONS, 2.7CU - 2.2LI - 0.12ZR (2090-T86), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4460 : 2015 | ALUMINUM ALLOY, CLAD TWO SIDES SHEET, 0.6MG - 0.35SI - 0.28CU (NO. 24 BRAZING SHEET), AS FABRICATED |
| SAE AMS4163F | ALUMINUM ALLOY, EXTRUSIONS 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511) SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED |
| SAE AMS4336A | ALUMINUM ALLOY, EXTRUDED ROD, BAR, AND PROFILES (7055-T76511) - 8.0ZN - 2.3CU - 2.0MG - 0.16ZR - SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS4342F | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T74511), SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| SAE AMS 4364 : 2016 | ALUMINUM ALLOY, PLATE, 7.9ZN - 1.8CU - 2.0MG - 0.10ZR (7099-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS4211B | ALUMINUM ALLOY, PLATE, 6.2ZN - 1.9CU - 2.1MG - 0.10ZR (7040-T7451) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4474 : 2015 | ALUMINUM ALLOY, SHEET AND PLATE, 4.0CU - 1.0LI - 0.40MG - 0.35AG - 0.13ZR (2195-T8), SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS4089E | ALUMINUM ALLOY, PLATE 1.6CU - 2.2MG - 0.22CR - 5.7ZN (7475-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND PRECIPITATION HEAT TREATED |
| SAE AMS4068F | ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T3511), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS 4477 : 2017 | ALUMINUM ALLOY, COILED SHEET, 4.4CU - 1.5MG - 0.60MN (2024-T4), SOLUTION TREATED |
| SAE AMS4071N | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS HYDRAULIC TUBING, 2.5MG - 0.25CR (5052-O), ANNEALED |
| SAE AMS 4413 : 2012 | ALUMINUM ALLOY, PLATE, 3.5 CU - 1.0LI - .40MG - .35 MN - .45AG - 0.12ZR (2050-T84), SOLUTION HEAT TREATED, STRESS RELIEVED, AND ARTIFICIALLY AGED |
| SAE AMS 4461 : 2012 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024-O, SHEET AND PLATE) ANNEALED; OR WHEN SPECIFIED, 'AS FABRICATED' (2024-F) |
| ASTM C 1423 : 2016 : REDLINE | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
| SAE AMS4118L | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.0CU - 0.70MN - 0.60MG - 0.50SI (2017; -T4, -T451), SOLUTION HEAT TREATED |
| SAE AMS 4404 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES (6056-T4511), 1.0SI - 0.90MG - 0.80CU - 0.60MN - 0.40ZN, SOLUTION HEAT TREATED AND STRESS-RELIEVED BY STRETCHING |
| SAE AMS4063E | ALUMINUM ALLOY, CLAD ONE SIDE SHEET, 1.25MN - 0.12CU (NO. 11-0 BRAZING SHEET), ANNEALED |
| SAE AMS4333D | ALUMINUM ALLOY, DIE FORGINGS 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7452) SOLUTION HEAT TREATED, COMPRESSION STRESS-RELIEVED, AND OVERAGED |
| SAE AMS4025M | ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) ANNEALED |
| SAE AMS4221E | ALUMINUM ALLOY, PLATE, 4.4CU - 1.5MG - 0.60MN (2124-T8151) SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| SAE AMS4149E | ALUMINUM ALLOY, DIE AND HAND FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T74), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4375M | SHEET AND PLATE, MAGNESIUM ALLOY - 3.0AL - 1.0ZN - 0.20MN (AZ31B-0) ANNEALED AND RECRYSTALLIZED |
| SAE AMS4120S | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351) |
| SAE AMS 4470 : 2012 | ALUMINUM ALLOY, PLATE (7085-T7451), 7.5ZN - 1.6CU - 1.5MG - 0.12ZR, SOLUTION HEAT TREATED, STRESS-RELIEVED, AND OVERAGED |
| SAE AMS 4041 : 2012-07 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024, -T3 SHEET/-T351 PLATE WITH 1-1/2% ALCLAD) SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS 4475 : 2017 | Aluminum Alloy, Coiled Sheet, Alclad 4.4Cu – 1.5Mg – 0.60Mn (Alclad 2024; -T4 Coiled Sheet) Solution Heat Treated |
| SAE AMS3025E | POLYALKYLENE GLYCOL HEAT TREAT QUENCHANT |
| SAE AMS 4467 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU 1.5MG 0.60MN (ALCLAD 2024, -T861 SHEET & PLATE) SOLUTION HEAT TREATED, 6% COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS 4366 : 2014 | ALUMINUM ALLOY, EXTRUDED PROFILES (2065-T84) 4.2CU - 1.2LI - 0.52MG - 0.32MN - 0.32AG - 0.1ZR SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING AND ARTIFICIALLY AGED |
| SAE AMS4179D | ALUMINUM ALLOY FORGINGS, 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7175-T7452), SOLUTION HEAT TREATED, STRESS RELIEVED, AND PRECIPITATION HEAT TREATED |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| SAE AMS4117K | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651) |
| SAE AMS4161H | ALUMINUM ALLOY, EXTRUSIONS 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS4243B | ALUMINUM ALLOY, ALCLAD SHEET 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (ALCLAD 7050-T76) SOLUTION HEAT TREATED AND OVERAGED |
| ASTM B 211M : 2012 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) |
| SAE AMS 4359 : 2016 | ALUMINUM ALLOY, EXTRUDED PROFILES (2395-T84), 3.95CU - 1.15LI - 0.3AG - 0.5MG - 0.1ZR, SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND AGED |
| ASTM B 313M : 1988 | Specification for Aluminum and Aluminum-Alloy Round Welded Tubes (Metric) (Withdrawn 1990) |
| ASTM C 1729M : 2017 : REDLINE | Standard Specification for Aluminum Jacketing for Insulation |
| SAE AMS4037Q | ALUMINUM ALLOY, SHEET AND PLATE, 4.4CU - 1.5MG - 0.60MN (2024; -T3 FLAT SHEET, -T351 PLATE) SOLUTION HEAT TREATED |
| SAE AMS4206C | ALUMINUM ALLOY, PLATE (7055-T7751), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS4080P | ALUMINUM ALLOY, DRAWN SEAMLESS TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-0), ANNEALED |
| SAE AMS4088K | ALUMINUM ALLOY, DRAWN, SEAMLESS TUBING 4.4CU - 1.5MG - 0.60MN (2024-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS4095D | ALUMINUM ALLOY, ALCLAD SHEET AND PLATE 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI ALCLAD 2219-T31; SHEET, SOLUTION HEAT TREATED AND COLD WORKED ALCLAD 2219-T351; PLATE, SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS4040P | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 4.4CU - 1.5MG - 0.60MN (2024-O WITH 1-1/2% ALCLAD); ANNEALED |
| SAE AMS4164H | ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3510), STRESS-RELIEF STRETCHED, UNSTRAIGHTENED |
| SAE AMS4125L | Aluminum Alloy Die Forgings, and Rolled or Forged Rings 0.9Si - 0.62Mg - 0.25Cr (6151-T6) Solution and Precipitation Heat Treated |
| ASTM B 209M : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) |
| SAE AMS4338A | ALUMINUM ALLOY, EXTRUSIONS, 4.0CU - 1.3MG - 0.60MN (2026-T3511), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS4250B | ALUMINUM ALLOY, PLATE - 8.1ZN - 2.3MG - 1.0CU - ZR (7449-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4372 : 2018 | ALUMINUM ALLOY, PLATE, 3.5CU - 1.0LI - 0.40MG - 0.35MN - 0.45AG - 0.12ZR (2050-T34), SOLUTION HEAT TREATED AND STRESS RELIEVED |
| SAE AMS4352J | MAGNESIUM ALLOY, EXTRUSIONS, 5.5ZN - 0.45ZR (ZK60A - T5), PRECIPITATION HEAT TREATED |
| SAE AMS4124E | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED |
| SAE AMS4132G | ALUMINUM ALLOY, DIE AND HAND FORGINGS, ROLLED RINGS, AND FORGING STOCK, 2.3CU - 1.6MG - 1.1FE - 1.0NI - 0.18SI - 0.07TI (2618-T61), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4307C | ALUMINUM ALLOY, EXTRUSIONS, 6.4ZN - 2.4MG - 2.2CU - 0.12ZR (7150-T61511), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, STRAIGHTENED, AND PRECIPITATION HEAT TREATED |
| ASTM B 483/B483M : 2013 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications |
| SAE AMS4100F | ALUMINUM ALLOY, ALCLAD, SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (ALCLAD 7475-T761), SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4195D | ALUMINUM ALLOY SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024 AND 1-1/2% ALCLAD 2024-T861 FLAT SHEET; 1-1/2% ALCLAD 2024-T861 PLATE), SOLUTION HEAT TREATED, COLD WORKED, AND PRECIPITATION HEAT TREATED |
| SAE AMS 4457 : 2014 | ALUMINUM ALLOY, SHEET 3.5CU - 1.1LI - 0.50MG - 0.40AG - 0.12ZR (2098-T8) SOLUTION HEAT TREATED, COLD WORKED, AND ARTIFICIALLY AGED |
| SAE AMS4082P | ALUMINUM ALLOY, SEAMLESS DRAWN TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4613 : 2017 | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.06TI - 0.10V - 0.18ZR, SOLUTION HEAT TREATED, COLD WORKED (8%) AND PRECIPITATION HEAT TREATED (2219 -T87) |
| SAE AMS 4480 : 2015 | ALUMINUM ALLOY, SEAMLESS DRAWN TUBING 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T4) SOLUTION HEAT TREATED AND NATURALLY AGED |
| SAE AMS4031J | ALUMINUM ALLOY, SHEET AND PLATE, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-O) ANNEALED OR WHEN SPECIFIED, 'AS FABRICATED' (2219-F) |
| SAE AMS4270C | ALUMINUM ALLOY, ALCLAD FLAT SHEET 4.1CU - 1.4MG - 0.45MN (ALCLAD 2424-T3) SOLUTION HEAT TREATED AND COLD WORKED |
| SAE AMS4086N | ALUMINUM ALLOY, DRAWN, ROUND, SEAMLESS HYDRAULIC TUBING, 4.4CU - 1.5MG - 0.6MN (2024-T3), SOLUTION HEAT TREATED, COLD WORKED AND NATURALLY AGED |
| SAE AMS4085D | ALUMINUM ALLOY SHEET, 5.7ZN - 2.2MG - 1.6CU - 0.22CR (7475-T761), SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS 4407 : 2018 | ALUMINUM ALLOY, PLATE (7056-T7651), 9.1ZN - 1.6CU - 1.9MG, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4478 : 2018 | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD, 4.4CU - 1.5MG - 0.60MN (ALCLAD 2024, -T81 SHEET, -T851 PLATE), SOLUTION HEAT TREATED, COLD WORKED AND ARTIFICIALLY AGED |
| SAE AMS4153L | ALUMINUM ALLOY, EXTRUSIONS 4.5CU - 0.85SI - 0.80MN - 0.50MG (2014-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS 4356 : 2016 | ALUMINUM ALLOY SEAMLESS DRAWN ROUND TUBING, 2.3 CU - 8.0 ZN - 2.0 MG - 0.16 ZR (7155-T76), SOLUTION HEAT TREATED AND AGED |
| SAE AMS 4408 : 2018 | ALUMINUM ALLOY, PLATE (7140-T7651), 6.6ZN - 1.8CU - 2.0MG - 0.10ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS 4326 : 2018 | ALUMINUM ALLOY, 2013, EXTRUDED BAR, ROD, AND PROFILES, 1.0MG - 0.80SI - 1.8CU - 0.20CR (2013- T6511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND AGED |
| SAE AMS 4305 : 2012 | ALUMINUM ALLOY, EXTRUDED PROFILES (7449-T79511) 8.1ZN - 1.8CU - 2.2MG - 0.16ZR SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED (COMPOSITION SIMILAR TO UNS A97449) |
| SAE AMS 4279 : 2011 | ALUMINUM ALLOY, ALCLAD SHEET, 4.4CU - 1.5MG - 0.60MN (2024 -T4 FLAT SHEET), SOLUTION HEAT TREATED, HIGH FORMABILITY |
| SAE AMS4049M | ALUMINUM ALLOY, SHEET AND PLATE, ALCLAD 5.6ZN - 2.5MG - 1.6CU - 0.23CR (ALCLAD 7075; -T6 SHEET - T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4087H | ALUMINUM ALLOY TUBING, SEAMLESS, DRAWN, (2024-0), REINSTATE COMPOSITION ANNEALED |
| SAE AMS4107G | ALUMINUM ALLOY DIE FORGINGS (7050-T74) SOLUTION HEAT TREATED AND OVERAGED |
| SAE AMS4123H | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS (7075-T651) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4156K | ALUMINUM ALLOY, EXTRUSIONS 0.68MG - 0.40SI (6063-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4150M | ALUMINUM ALLOY, EXTRUSIONS AND RINGS 1.0MG - 0.60SI - 0.28CU - 0.20CR - (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
| SAE AMS4201F | ALUMINUM ALLOY PLATE 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T7651) SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS4337B | ALUMINUM ALLOY, EXTRUDED PROFILES (7055-T77511), 8.0ZN - 2.3CU - 2.0MG - 0.16ZR, SOLUTION HEAT TREATED, STRESS RELIEVED, AND OVERAGED |
| SAE AMS4340E | ALUMINUM ALLOY, EXTRUSIONS, 6.2ZN - 2.3CU - 2.2MG - 0.12ZR (7050-T76511), SOLUTION HEAT TREATED, STRESS RELIEVED, STRAIGHTENED, AND OVERAGED |
| ASTM B 308M : 1988 | Specification for Aluminum-Alloy 6061-T6 Standard Structural Shapes, Rolled or Extruded (Metric) (Withdrawn 1990) |
| ASTM C 1729 : 2017 : REDLINE | Standard Specification for Aluminum Jacketing for Insulation |
| SAE AMS4056H | ALUMINUM ALLOY, SHEET AND PLATE, 4.4MG - 0.70MN - 0.15CR (5083-O), ANNEALED |
| SAE AMS 4402 : 2018 | ALUMINUM ALLOY, EXTRUDED PROFILES (2024-T432), 4.4CU - 1.5MG - 0.6MN, ANNEALED, STRETCH FORMED, SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING |
| SAE AMS4063F | Aluminum Alloy, Clad One Side, Sheet, 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet), Annealed |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.