Skip to content
Please enter a keyword to search
  • Preview

    AS 1100.201-1992

    Current The latest, up-to-date edition.

    Technical drawing Mechanical engineering drawing (Reconfirmed 2014)

    Available format(s):  Hardcopy, PDF 1 User, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s): 

    Published date:  16-11-1992

    Publisher:  Standards Australia

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Sets out recommendations for mechanical engineering drawing practice. Provides information on surface texture and welding, and the simplified representation of pipelines. Provides details on springs, gears, splines, rolling element bearings, seals and knurling. Appendices provide guidance on the tolerance of machined components and castings.

    Scope - (Show below) - (Hide below)

    This Standard sets out requirements and recommendations for mechanical engineering drawing practice. It is complementary to AS 1100.101.The Standard provides information on surface texture and welding, and the simplified representationof pipelines. Details are also provided on various mechanical features and parts used on mechanical drawings.Appendices provide guidance on the tolerancing of machined components and castings.

    General Product Information - (Show below) - (Hide below)

    Committee ME-072
    Document Type Standard
    Product Note See also HB 1, HB 3, HB 6Reconfirmed 20/01/2014.This standard has been reconfirmed in Australia in 2014 and remains current in New Zealand. Reconfirmation Notice 20/01/2014
    Publisher Standards Australia
    Status Current
    Supersedes

    History - (Show below) - (Hide below)

    Under Revision see DR 01197 AS 1100.9 first published 1974.AS 1100.10 first published 1974.AS 1100.11 first published 1974.AS 1100.12 first published 1979.AS 1100.9-1974, AS 1100.10-1974, AS 1100.11-1974, AS 1100.12-1979 revised, amalgamated and redesignated AS 1100.201-1984.Second edition 1992.Reconfirmed 2014. For history before 1992, see Preface. Second edition AS 1100.201-1992. Incorporating Amdt 1-1992.

    Standards Referenced By This Book - (Show below) - (Hide below)

    AS 1101.1-1993 Graphic symbols for general engineering - Hydraulic and pneumatic systems
    AS 1101.3-2005 Graphical symbols for general engineering Welding and non-destructive examination
    AS/NZS 1100.501:2002 Technical drawing Structural engineering drawing (Reconfirmed 2014)
    AS 1101.2-1972 Graphical symbols for general engineering Ventilation systems in ships
    AS 1101.5-1984 Graphical symbols for general engineering - Piping, ducting and mechanical services for buildings
    AS 1101.1-2007 Graphic symbols for general engineering Hydraulic and pneumatic systems
    AS 1100.301-1985 Technical drawing Architectural drawing
    AS 1100.401-1984 Technical drawing Engineering survey and engineering survey design drawing (Reconfirmed 2014)
    AS 1100.501-1985 Technical drawing - Structural engineering drawing
    AS 1913-1976 Centre drills
    AS 2075-1991 Glossary of terms and notations for gears
    AS 1100.101-1992 Technical drawing General principles (Reconfirmed 2014)
    AS 1101.4-1989 Graphical symbols for general engineering - Machine elements
    AS 1101.3-1987 Graphical symbols for general engineering - Welding and non-destructive examination
    AS 2536-1982 Surface texture

    Standards Referencing This Book - (Show below) - (Hide below)

    AS 1085.16-1995 Railway permanent way material - Part 16: Cast sleeper plates
    AS 3779-1990 Height setting micrometers and riser blocks
    HB 47-1993 Dimensioning and Tolerancing to AS 1100.101-1992 and AS 1100.201-1992
    AS 1085.1-1995 Railway permanent way material - Part 1: Steel rails
    AS/NZS 2350.11:2006 Methods of testing portland, blended and masonry cements Compressive strength
    AS/NZS 2350.11:2001 Methods of testing portland, blended and masonry cements Compressive strength
    AS 1085.1-2002 Railway track material Steel rails (Reconfirmed 2013)
    AS 3871.1-1994 Magnetic tape sound recording and reproducing systems - General conditions and requirements
    AS 2350.12-2006 Methods of testing portland, blended and masonry cements Preparation of a standard mortar and moulding of specimens
    AS 1101.4-1989 Graphical symbols for general engineering - Machine elements
    AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
    AS 1101.1-1993 Graphic symbols for general engineering - Hydraulic and pneumatic systems
    AS 3602-1988 Information processing - Data interchange on 12.7 mm wide magnetic tape cartridges - 18 tracks, 1491 data bytes per millimetre
    AS 1100.301-1985 Technical drawing Architectural drawing
    AS 1100.401-1984 Technical drawing Engineering survey and engineering survey design drawing (Reconfirmed 2014)
    AS 2350.12-1995 Methods of testing portland and blended cements Preparation of a standard mortar and moulding of specimens
    AS 1100.101-1992 Technical drawing General principles (Reconfirmed 2014)
    AS 1334.13:2017 Methods of testing conveyor and elevator belting Determination of indentation rolling resistance of conveyor belting
    AS 1085.1-2000 Railway permanent way material Steel rails
    AS 1100.301-2008 Technical drawing Architectural drawing (Reconfirmed 2018)
    AS 3531-1988 Solid and segmental circular saws for cold cutting metals - Interchangeability dimensions of the drive - Saw diameter range 224 mm to 2240 mm
    AS 4738.1-2007 Metal castings - Ferrous sand moulded
    AS 4738.1-2004 Metal castings - Ferrous sand moulded
    AS 4314-2005 Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
    AS 62271.301-2005 High voltage switchgear and controlgear Dimensional standardization of terminals (Reconfirmed 2016)
    AS/NZS 2350.11:1997 Methods of testing portland and blended cements Compressive strength of portland and blended cements
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective