CSA ISO/IEC 14776-115 : 2005 : R2010
|
INFORMATION TECHNOLOGY - SMALL COMPUTER SYSTEM INTERFACE (SCSI) - PART 115: PARALLEL INTERFACE-5 (SPI-5) |
ISO 5261:1995
|
Technical drawings — Simplified representation of bars and profile sections |
BS EN 61076-7:2001
|
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications Cable outlet accessories with assessed quality, including qualification and capability approval. Sectional specification |
BS 308-1.10(1996) : 1996
|
TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - GENERAL CONVENTIONS |
BS 2774(1983) : 1983 AMD 8620
|
SPECIFICATION FOR DRAWING CONVENTIONS FOR LABORATORY GLASS APPARATUS |
BS EN 60603-1:2000
|
Connectors for frequencies below 3 MHz for use with printed boards Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality |
BS ISO 5599-2:2001
|
Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces with optional electrical connector |
DIN ISO 6414:1984-02
|
TECHNICAL DRAWINGS FOR GLASSWARE |
07/30167285 DC : 0
|
BS EN 60869-1 - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION |
BS 7389-1:1990
|
Pneumatic fluid power valve mounting surfaces Specification for five-port directional control valves (without electrical connector) |
DIN ISO 5459:1982-01
|
TECHNICAL DRAWINGS; GEOMETRICAL TOLERANCING; DATUMS AND DATUM SYSTEMS FOR GEOMETRICAL TOLERANCES |
BS EN 61248-6:1997
|
Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for inductors on the basis of the capability approval procedure |
BS ISO 10110-10:2004
|
Optics and photonics. Preparation of drawings for optical elements and systems Table representing data of optical elements and cemented assemblies |
BS EN 61274-1:2012
|
Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors Generic specification |
DIN ISO 5456-2:1998-04
|
Technical drawings - Projection methods - Part 2: Orthographic representations (ISO 5456-2:1996) |
IEC 60131-1:1984
|
Lever switches. Part 1: General requirements and rules for the preparation of detail specifications |
I.S. EN 61248-5:1998
|
TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 5: SECTIONAL SPECIFICATION FOR PULSE TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
I.S. EN ISO 5456-2:1999
|
TECHNICAL DRAWINGS - PROJECTION METHODS - PART 2: ORTHOGRAPHIC REPRESENTATIONS (ISO 5456-2:1996) |
ANSI INCITS 367 : 2003(S2018)
|
INFORMATION TECHNOLOGY - SCSI PARALLEL INTERFACE-5 (SPI-5) |
ANSI INCITS 367 : 2003 : R2008
|
INFORMATION TECHNOLOGY - SCSI PARALLEL INTERFACE-5 (SPI-5) |
I.S. EN 61248-7:1998
|
TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 7: SECTIONAL SPECIFICATION FOR HIGH-FREQUENCY INDUCTORS AND INTERMEDIATE FREQUENCY TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
I.S. EN ISO 8560:1999
|
TECHNICAL DRAWINGS - CONSTRUCTION DRAWINGS - REPRESENTATION OF MODULAR SIZES, LINES AND GRIDS |
ISO 6414:1982
|
Technical drawings for glassware |
BS EN ISO 5261:1999
|
Technical drawings. Simplified representation of bars and profile sections |
EN 61314-1:2012
|
Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
DIN ISO 10110-10:2004-12
|
OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 10: TABLE REPRESENTING DATA OF OPTICAL ELEMENTS AND CEMENTED ASSEMBLIES |
EN 61248-2:1997
|
Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure |
EN 61076-7-001:2004
|
Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification |
EN 175500:1997
|
Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval |
EN 60874-1:2012
|
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
EN ISO 7519:1996
|
Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings (ISO 7519:1991) |
EN 61248-4:1997
|
Transformers and inductors for use in electronic and telecommunication equipment - Part 4: Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure |
EN 61076-7:2000
|
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification |
EN 181000:1994
|
Generic Specification: Fibre optic branching devices |
EN 180000:1995
|
Generic specification: Fibre optic attenuators |
BS QC 880000-1(1995) : 1995 AMD 9689
|
HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - FIBRE OPTIC FAN-OUTS - GENERIC SPECIFICATION |
DIN ISO 128-22:1999-11
|
Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999) |
14/30304194 DC : 0
|
BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTICFILTERS - GENERIC SPECIFICATION |
BS EN 61269-1:1997
|
Fibre optic terminus sets Generic specification |
CEI EN 61076-7 : 2001
|
CONNECTORS FOR USE IN D/C/, LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 7: CABLE OUTLET ACCESSORIES WITH ASSESSED QUALITY, INCLUDING QUALIFICATION AND CAPABILITY APPROVAL - SECTIONAL SPECIFICATION |
04/30126747 DC : DRAFT DEC 2004
|
IEC 60874-1 ED.5 - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
07/30168153 DC : 0
|
BS EN 60875-1 - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
00/201724 DC : DRAFT APR 2000
|
IEC 61076-1 - CONNECTORS - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
10/30218221 DC : 0
|
BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
10/30234803 DC : 0
|
BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
CEI EN 61314-1 : 2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
BS EN 181000:1995
|
Harmonized system of quality assessment for electronic components. Generic specification. Fibre optic branching devices |
ANSI INCITS 362 : 2002
|
SCSI PARALLEL INTERFACE-4 (SPI-4) |
BS EN 62099:2001
|
Fibre optic wavelength switches. Generic specification |
BS EN 175500:1997
|
Harmonized system of quality assessment for electronic components. Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval |
I.S. EN 61314-1:2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV)) |
AAMI ISO 5356-1 : 2004
|
ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - PART 1: CONES AND SOCKETS |
I.S. EN 61269-1:1999
|
FIBRE OPTIC TERMINUS SETS - PART 1: GENERIC SPECIFICATION |
I.S. EN 61248-3:1998
|
TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 3: SECTIONAL SPECIFICATION FOR POWER TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
I.S. EN 61248-4:1998
|
TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 4: SECTIONAL SPECIFICATION FOR POWER TRANSFORMERS FOR SWITCHED MODE POWER SUPPLIES (SMPS) ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
ISO 5845-2:1995
|
Technical drawings Simplified representation of the assembly of parts with fasteners Part 2: Rivets for aerospace equipment |
ISO 5599-1:2001
|
Pneumatic fluid power — Five-port directional control valves — Part 1: Mounting interface surfaces without electrical connector |
CEI EN 60603-1 : 2001
|
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
ISO/TR 18569:2004
|
Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
I.S. EN ISO 10303-210:2002
|
INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 210: APPLICATION PROTOCOL: ELECTRONIC ASSEMBLY, INTERCONNECTION, AND PACKAGING DESIGN |
BS 308-1:1984
|
Engineering drawing practice Recommendations for general principles |
BS 308-2:1985
|
Engineering drawing practice Recommendations for dimensioning and tolerancing of size |
BS 308-3:1990
|
Engineering drawing practice Recommendations for geometrical tolerancing |
BS CECC 22000:1993
|
Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III) |
ISO/IEC 11714-1:1996
|
Design of graphical symbols for use in the technical documentation of products — Part 1: Basic rules |
IEC 63032:2018
|
Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification |
09/30199223 DC : DRAFT JAN 2009
|
BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
DIN ISO 6412-1:1991-05
|
TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF PIPELINES - GENERAL RULES AND ORTHOGONAL REPRESENTATION |
08/30191292 DC : DRAFT OCT 2008
|
BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
BS EN 61314-1:2012
|
Fibre optic interconnecting devices and passive components. Fibre optic fan-outs Generic specification |
14/30304019 DC : 0
|
BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES |
07/30164787 DC : 0
|
EN 62134-1 - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
BS ISO 128-22:1999
|
Technical drawings. General principles of presentation Basic conventions and applications for leader lines and reference lines |
07/30164411 DC : 0
|
EN 61314-1 - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
04/30077768 DC : DRAFT FEB 2004
|
ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES |
BS EN 61076-7-001:2004
|
Connectors for electronic equipment Cable outlet accessories - Blank detail specification |
BS 5550-2.1.2:1978
|
Cinematography. 16 mm film. Raw stock Specification for cutting and perforating dimensions of 35 mm motion-picture film perforated (1-3-0) |
CEI EN 62099 : 2002
|
FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION |
08/30191273 DC : DRAFT OCT 2008
|
BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION |
08/30169101 DC : 0
|
BS EN 61978-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION |
BS ISO 128-34:2001
|
Technical drawings. General principles of presentation Views on mechanical engineering drawings |
I.S. EN 61076-7-001:2004
|
CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-001: CABLE OUTLET ACCESSORIES - BLANK DETAIL SPECIFICATION |
I.S. EN 60874-1:2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV)) |
BS ISO 10303-47:1997
|
Industrial automation systems and integration. Product data representation and exchange Integrated generic resource. Shape variation tolerances |
BS EN 60869-1:2013
|
Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices Generic specification |
IEC PAS 62074-1:2007
|
Fibre optic WDM devices - Part 1: Generic specification |
BS ISO 5459:1981
|
Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances |
DIN ISO 5456-3:1998-04
|
TECHNICAL DRAWINGS - PROJECTIONS METHODS - PART 3: AXONOMETRIC REPRESENTATIONS |
CSA ISO/IEC 14776-115 : 2005 : R2015
|
INFORMATION TECHNOLOGY - SMALL COMPUTER SYSTEM INTERFACE (SCSI) - PART 115: PARALLEL INTERFACE-5 (SPI-5) |
PREN 4408-1 : 200P1
|
AEROSPACE SERIES - TECHNICAL DRAWINGS - REPRESENTATION OF PARTS MADE OF COMPOSITE MATERIALS - PART 1: GENERAL RULES |
I.S. EN 60869-1:2013
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION (IEC 60869-1:2012 (EQV)) |
ISO 5781:2016
|
Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces |
ISO 5845-1:1995
|
Technical drawings Simplified representation of the assembly of parts with fasteners Part 1: General principles |
ISO 6410-1:1993
|
Technical drawings — Screw threads and threaded parts — Part 1: General conventions |
EN ISO 6410-1:1996
|
Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993) |
ISO 128-23:1999
|
Technical drawings General principles of presentation Part 23: Lines on construction drawings |
BS 308-2.3(1996) : 1996
|
TECHNICAL DRAWINGS - DIMENSIONING AND TOLERANCING OF PROFILES |
BS EN 186000-1:1994
|
Harmonized system of quality assessment for electronic components. Generic specification. Connector sets for optical fibres and cables Requirements, test methods and qualification approval procedures |
DIN ISO 5845-2:1997-04
|
TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF THE ASSEMBLY OF PARTS WITH FASTENERS - PART 2: RIVETS FOR AEROSPACE EQUIPMENT |
10/30197395 DC : 0
|
BS ISO 10209 - TECHNICAL PRODUCT DOCUMENTATION - VOCABULARY - TERMS RELATING TO TECHNICAL DRAWINGS, PRODUCT DEFINITION AND RELATED PRODUCTS |
BS ISO 128-23:1999
|
Technical drawings. General principles of presentation Lines on construction drawings |
DD IEC PAS 62074-1 : DRAFT NOV 2007
|
FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
BS QC 480000(1995) : 1995
|
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION |
DIN ISO 1101:1985-03
|
TECHNICAL DRAWINGS, GEOMETRICAL TOLERANCING, TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUNOUT - GENERALITIES, DEFINITIONS, SYMBOLS ON DRAWINGS |
96/709929 DC : DRAFT JUL 1996
|
ISO/CD 7368 - HYDRAULIC FLUID POWER - TWO-PORT SLIP-IN CARTRIDGE VALVES - CAVATIES |
CEI EN 61274-1 : 2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION |
07/30162389 DC : 0
|
BS EN 62496-1 - OPTICAL CIRCUIT BOARDS - PART 1: GENERAL STANDARD |
BS EN 61248-5:1997
|
Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for pulse transformers on the basis of the capability approval procedure |
DD IEC/PAS 62515:2007
|
Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems |
12/30259951 DC : 0
|
BS EN 62074-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
BS ISO 406:1987
|
Technical drawings. Tolerancing of linear and angular dimensions |
BS ISO 5599-1:2001
|
Pneumatic fluid power. Five-port directional control valves Mounting interface surfaces without electrical connector |
BS EN 61248-3:1997
|
Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for power transformers on the basis of the capability approval procedure |
BS ISO 6264:1998
|
Hydraulic fluid power. Pressure-relief valves. Mounting surfaces |
BS EN 180000:1996
|
Harmonized system of quality assessment for electronic components. Generic specification: Fibre optic attenuators |
08/30174656 DC : DRAFT SEP 2008
|
BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
BS EN 61248-2:1997
|
Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for signal transformers on the basis of the capability approval procedure |
DIN ISO 6410-1:1993-12
|
TECHNICAL DRAWINGS - SCREW THREADS AND THREADED PARTS - GENERAL CONVENTIONS |
BS EN ISO 8560:1999
|
Construction drawings. Representation of modular sizes, lines and grids |
ISO 5599-2:2001
|
Pneumatic fluid power — Five-port directional control valves — Part 2: Mounting interface surfaces with optional electrical connector |
NFL 07-115/1 : 97 XP
|
AEROSPACE SERIES - RULES FOR THE REPRESENTATION OF ITEMS MADE OF COMPOSITE MATERIALS - GENERAL |
IEC PAS 62515:2007
|
Requirements concerning the interoperability between electromechanical and electrical applications in CAx-systems |
CEI EN 60874-1 : 2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
ISO 8560:1986
|
Technical drawings Construction drawings Representation of modular sizes, lines and grids |
I.S. EN 175500:1998
|
CABLE OUTLET ACCESSORIES FOR CONNECTORS, INCLUDING QUALIFICATION APPROVAL AND CAPABILITY APPROVAL (SECTIONAL SPECIFICATION) |
EN ISO 6414:1994
|
Technical drawings for glassware (ISO 6414:1982) |
I.S. EN ISO 6414:1995
|
TECHNICAL DRAWINGS FOR GLASSWARE |
IEC 61248-6:1996
|
Transformers and inductors for use in electronic andtelecommunication equipment - Part 6: Sectional specification forinductors on the basis of the capability approval procedure |
IEC 60869-1:2012
|
Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification |
IEC 61076-7-001:2004
|
Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification |
IEC 60874-1:2011
|
Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
BS EN ISO 5456-2:1999
|
Technical drawings. Projection methods Orthographic representations |
IEC 61314-1:2011
|
Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
BS EN ISO 7519:1997
|
Technical drawings. Construction drawings. General principles of presentation for general arrangement and assembly drawings |
BS EN ISO 6284:1999
|
Construction drawings. Indication of limit deviations |
ISO 7519:1991
|
Technical drawings — Construction drawings — General principles of presentation for general arrangement and assembly drawings |
ISO 11091:1994
|
Construction drawings Landscape drawing practice |
BS EN ISO 5845-1:1999
|
Technical drawings. Simplified representation of the assemby of parts with fasteners General principles |
IEC 61274-1:2011
|
Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
ISO 406:1987
|
Technical drawings Tolerancing of linear and angular dimensions |
ISO 5456-3:1996
|
Technical drawings — Projection methods — Part 3: Axonometric representations |
IEC 61248-5:1996
|
Transformers and inductors for use in electronic andtelecommunication equipment - Part 5: Sectional specification forpulse transformers on the basis of the capability approvalprocedure |
IEC 62099:2001
|
Fibre optic wavelength switches - Generic specification |
IEC 61248-3:1996
|
Transformers and inductors for use in electronic andtelecommunication equipment - Part 3: Sectional specification forpower transformers on the basis of the capability approvalprocedure |
IEC 61248-4:1996
|
Transformers and inductors for use in electronic andtelecommunication equipment - Part 4: Sectional specification forpower transformers for switched mode power supplies (SMPS) on thebasis of the capability approval procedure |
BS EN ISO 11091:1999
|
Construction drawings. Landscape drawing practice |
BS EN ISO 5456-3:1999
|
Technical drawings. Projection methods Axonometric representations |
IEC 61248-2:1996
|
Transformers and inductors for use in electronic andtelecommunication equipment - Part 2: Sectional specification forsignal transformers on the basis of the capability approvalprocedure |
IEC 61076-7:2000
|
Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation |
EN ISO 4172:1996
|
Technical drawings - Construction drawings - Drawings for the assembly of prefabricated structures (ISO 4172:1991) |
EN ISO 5456-3:1999
|
Technical drawings - Projection methods - Part 3: Axonometric representations (ISO 5456-3:1996) |
EN ISO 5456-2:1999
|
Technical drawings - Projection methods - Part 2: Orthographic representations (ISO 5456-2:1996) |
EN 180000 : 1995
|
GENERIC SPECIFICATION: FIBRE OPTIC ATTENUATORS |
EN ISO 10303-210:2002
|
Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnection, and packaging design (ISO 10303-210:2001) |
EN ISO 5261:1999
|
Technical drawings - Simplified representation of bars and profile sections (ISO 5261:1995) |
EN ISO 11091:1999
|
Construction drawings - Landscape drawing practice (ISO 11091:1994) |
EN ISO 5845-1:1999
|
Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles (ISO 5845-1:1995) |
BS ISO 5781:2000
|
Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces |
ISO 4401:2005
|
Hydraulic fluid power — Four-port directional control valves — Mounting surfaces |
ASTM F 1054 : 2001
|
Standard Specification for Conical Fittings (Withdrawn 2005) |
10/30218225 DC : 0
|
BS EN 60874-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
DIN ISO 5845-1:1997-04
|
TECHNICAL DRAWINGS - SIMPLIFIED REPRESENTATION OF THE ASSEMBLY OF PARTS WITH FASTENERS - PART 1: GENERAL PRINCIPLES |
BS QC010000(1993) : AMD 10432
|
HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. CONNECTORS FOR FREQUENCIES BELOW 3 MHz FOR USE WITH PRINTED BOARDS - GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
10/30218213 DC : 0
|
BS EN 61274-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION |
DIN ISO 10110-10 E : 2004
|
OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 10: TABLE REPRESENTING DATA OF OPTICAL ELEMENTS AND CEMENTED ASSEMBLIES |
DIN ISO 128-24:1999-12
|
TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 24: LINES ON MECHANICAL ENGINEERING DRAWINGS |
BS EN 61248-7:1998
|
Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for high-frequency inductors and intermediate transformers on the basis of the capability approval procedure |
13/30274174 DC : 0
|
BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES |
07/30172547 DC : 0
|
BS EN 62074-1 - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
04/30125584 DC : DRAFT NOV 2004
|
IEC 61274-1 ED 2 - ADAPTORS FOR OPTICAL FIBRES AND CABLES - PART 2: GENERIC SPECIFICATION |
I.S. EN 61248-2:1998
|
TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 2: SECTIONAL SPECIFICATION FOR SIGNAL TRANSFORMERS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
BS ISO 4401:2005
|
Hydraulic fluid power. Four-port directional control valves. Mounting surfaces |
BS EN 61248-4:1997
|
Transformers and inductors for use in electronic and telecommunication equipment Sectional specification for power transformers for switched mode power supplies (SMPS) on the basis of the capability approval procedure |
BS 5550-1.1.3:1978
|
Cinematography. 8 mm film. Raw stock Specification for cutting and perforating dimensions of 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0 or 1-0) |
BS EN 60874-1:2012
|
Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables Generic specification |
CSA ISO/IEC 14776-115 :2005
|
INFORMATION TECHNOLOGY - SMALL COMPUTER SYSTEM INTERFACE (SCSI) - PART 115: PARALLEL INTERFACE-5 (SPI-5) |
I.S. EN 61248-6:1998
|
TRANSFORMERS AND INDUCTORS FOR USE IN ELECTRONIC AND TELECOMMUNICATION EQUIPMENT - PART 6: SECTIONAL SPECIFICATION FOR INDUCTORS ON THE BASIS OF THE CAPABILITY APPROVAL PROCEDURE |
I.S. EN 181000:1994
|
FIBRE OPTIC BRANCHING DEVICES (GENERIC SPECIFICATION) |
ISO/IEC 14776-115:2004
|
Information technology Small Computer System Interface (SCSI) Part 115: Parallel Interface-5 (SPI-5) |
I.S. EN 61274-1:2012
|
FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV)) |
EN ISO 8560:1999
|
Technical drawings - Construction drawings - Representation of modular sizes, lines and grids (ISO 8560:1986) |
ISO 10110-10:2004
|
Optics and photonics Preparation of drawings for optical elements and systems Part 10: Table representing data of optical elements and cemented assemblies |
IEC 60807-1:1991
|
Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality |
I.S. CECC 86000:1993
|
CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES - PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES (GENERIC SPECIFICATION) |
BS EN ISO 4172:1997
|
Technical drawings. Construction drawings. Drawings for the assembly of prefabricated structures |
PD ISO/TR 18569:2004
|
Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
ISO 5456-2:1996
|
Technical drawings — Projection methods — Part 2: Orthographic representations |
ISO 4172:1991
|
Technical drawings — Construction drawings — Drawings for the assembly of prefabricated structures |
BS EN ISO 6410-1:1996
|
Technical drawings. Screw threads and threaded parts General conventions |
EN 62099:2001
|
Fibre optic wavelength switches - Generic specification |
EN 61248-7:1997
|
Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high-frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure |
EN 61248-6:1997
|
Transformers and inductors for use in electronic and telecommunication equipment - Part 6: Sectional specification for inductors on the basis of the capability approval procedure |
EN 60869-1:2013
|
Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification |
EN 61269-1:1997
|
Fibre optic terminus sets - Part 1: Generic specification |
EN 61274-1:2012
|
Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
EN 60603-1:1998
|
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality |
EN 61248-3:1997
|
Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure |
EN 61248-5:1997
|
Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure |
I.S. EN ISO 4172:1997
|
TECHNICAL DRAWINGS - CONSTRUCTION DRAWINGS - DRAWINGS FOR THE ASSEMBLY OF PREFABRICATED STRUCTURES |
I.S. EN ISO 6284:1999
|
CONSTRUCTION DRAWINGS - INDICATION OF LIMIT DEVIATIONS |