AS 1192-2004
Current
The latest, up-to-date edition.
Electroplated coatings - Nickel and chromium (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
02-04-2004
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies the requirements for electroplated coatings of nickel and nickel plus chromium on steel or iron, zinc alloy, copper or copper alloy, aluminium or aluminium alloys.
| Committee |
MT-009
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5845 2
|
| Pages |
26
|
| ProductNote |
Reconfirmed 07/04/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/04/2017
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for electroplated coatings of nickel and nickel plus chromium on steel or iron, zinc alloy, copper or copper alloy, aluminium or aluminium alloys. It also specifies requirements for coatings of nickel-iron alloys containing a maximum iron content of 25 percent, and coatings incorporating a copper undercoat. It does not preclude the use of gold, copper, brass or other metals plated over nickel. This Standard does not apply to the following: (a) Coatings applied to screw threads (with tolerances). (b) Coatings applied to sheet, strip or wire in the unfabricated form, or to coil springs. (c) Coatings applied as an undercoat to hard chromium coatings for engineering applications, see AS 2453. (d) Coatings applied to plastics, see AS 1406. Supplementary information to be supplied with the enquiry or order is specified in Appendix A. NOTE: The means for demonstrating compliance with the Standard are shown in Appendix B.
Originated as AS K97-1947.
Previous edition AS 1192-1982.
Third edition 2004.
| AS 2331.3.10-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Cracks and pores in chromium |
| AS 2331.4.2-2004 | Methods of test for metallic and related coatings Physical tests - Ductility |
| AS 2483-2003 | Metal finishing - Recommended sampling plans for the inspection and testing of coatings (ISO 4519:1980, MOD) |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS 4108-1993 | Metal finishing - Glossary of terms used in electroplating and related processes |
| AS 4291.1-2000 | Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs |
| AS 2331.3.2-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Acetic acid salt spray test (ASS test) |
| AS 4108-2005 | Metal finishing - Glossary of terms in electroplating and related processes (Reconfirmed 2017) |
| AS 2331.4.4-2001 | Methods of test for metallic and related coatings Physical test - Assessment of intensity of shot-peening |
| AS 2331.1.2-2001 | Methods of test for metallic and related coatings Local thickness tests - Coulometric method (Reconfirmed 2017) |
| AS 2331.4.2-1990 | Methods of test for metallic and related coatings Physical tests - Ductility test |
| AS 2331.3.3-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Copper accelerated acetic acid salt spray test (CASS test) |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS/NZS ISO 9001:2000 | Quality management systems - Requirements |
| AS 2331.1.1-2001 | Methods of test for metallic and related coatings Local thickness tests - Micrographic examination of cross-sections |
| AS 2331.4.1-2001 | Methods of test for metallic and related coatings Physical tests - Qualitative adhesion tests (Reconfirmed 2017) |
| HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
| AS 2453-2004 | Electroplated coatings - Chromium for engineering applications (Reconfirmed 2017) |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS 1247-2004 | Metallic coatings - Rating of test specimens and manufactured articles subject to corrosion tests (Reconfirmed 2017) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS ISO 9004:2000 | Quality management systems - Guidelines for performance improvements |
| AS 1406-2004 | Electroplated coatings - Nickel and chromium on plastics for decorative applications (Reconfirmed 2017) |
| AS 4145.2-2008 | Locksets and hardware for doors and windows Mechanical locksets for doors and windows in buildings |
| AS 2615:2016 | Hydraulic trolley jacks |
| AS 1549-1983 | Performance of household electrical appliances - Ranges, built-in cooking tops and wall-mounted ovens |
| HB 393-2011 | Bunk beds for the short-term rental accommodation industry |
| AS/NZS 2088:2000 | Prams and strollers - Safety requirements |
| AS 3747-1989 | Harnesses for use in prams, strollers, and high chairs (including a detachable walking rein) |
| AS/NZS 1891.3:1997 | Industrial fall-arrest systems and devices - Fall-arrest devices |
| AS 1410-2003 | Sterilizers - Steam - Pre-vacuum |
| AS 1657-2013 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS/NZS 2130:1998 | Cots for day nursery, hospital and institutional use - Safety requirements |
| AS 3765.1-1990 | Clothing for protection against hazardous chemicals Protection against general or specific chemicals |
| AS/NZS 4385:1996 | Infants’ rocking cradles - Safety requirements |
| AS 4145.2-1993 | Locksets Mechanical locksets for doors in buildings |
| AS 3695-1992 | Wheelchairs - Product requirements |
| AS 2259-1996 | General requirements for buoyancy aids |
| AS/NZS 2538:2004 | Vehicle support stands |
| AS 1657-1992 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS 2538:2016 | Vehicle support stands |
| AS 2182-1998 | Sterilizers - Steam - Benchtop |
| AS 1900-2002 | Flotation aids for water familiarization and swimming tuition |
| AS 2192-2002 | Sterilizers - Steam - Downward-displacement |
| AS 3581-1988 | Mechanical aids for patient lifting and moving - Safety requirements |
| AS 4115-1993 | Hand torque tools |
| AS 2437-1987 | Flusher/sanitizers for bed pans and urine bottles |
| AS 3527.1-1988 | Hand-operated screwdrivers and screwdriver bits - Screwdrivers for slotted and cross-recessed fasteners |
| AS 2640:2016 | Portable ramps for vehicles |
| AS/NZS 2615:2004 | Hydraulic trolley jacks |
| AS/NZS 2640:1994 | Portable ramps for vehicles |
| AS 4069-1993 | Bathseats - Product requirements |
| AS/NZS 3973:2009 | Shower/toilet chairs (mobile and static) (Reconfirmed 2016) |
| AS/NZS 4443:1997 | Office panel systems - Workstations |
| AS 1657:2018 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS 1897-1976 | Electroplated coatings on threaded components (metric coarse series) |
| AS/NZS 2693:2007 | Vehicle jacks |
| AS 1371-1973 | Toilet seats of moulded plastics |
| AS/NZS 3973:2005 | Shower/toilet chairs (mobile and static) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.