AS 1210 SUPP 2-1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Pressure vessels - Cold-stretched austenitic stainless steel vessels (Supplement to AS 1210-1997)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
09-07-2024
English
01-01-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for pressure vessels designed and fabricated from austenitic stainless steel, cold-stretched to enhance proof strength and hence generally permit higher design strengths than those specified in AS 1210 and Supplement 1. Two additional classes of vessel identified as Class 1S and Class 2SA are introduced.
| Committee |
ME-001
|
| DocumentType |
Supplement (Main)
|
| ISBN |
0 7337 2824 3
|
| Pages |
14
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
Clause 1.1 of AS 1210 applies with the following additions:Supplement 2 (hereafter referred to as 'the Supplement' or 'this Supplement') specifies requirements for two additional classes of vessel identified as Class 1S and Class 2SA. This Supplement specifies requirements for pressure vessels designed and fabricated from austenitic stainless steel, cold-stretched to enhance proof strength; and hence permits higher design strengths than those specified in AS 1210 and Supplement 1.Only those requirements which supplement or differ from those specified in AS 1210 are specified in this Supplement.
First published as part of Rul PE/1.
Revised and redesignated in part as AS 1210 Supplement 2-1999.
| AS 4343-1999 | Pressure equipment - Hazard levels |
| AS/NZS 1715:2009 | Selection, use and maintenance of respiratory protective equipment (Reconfirmed 2024) |
| AS/NZS 2243.6:2010 | Safety in laboratories Plant and equipment aspects |
| AS/NZS 4645.2:2008 | Gas distribution networks Steel pipe systems |
| AS/NZS 4645.3:2008 | Gas distribution networks Plastics pipe systems |
| AS 2885.0-2008 | Pipelines - Gas and liquid petroleum General requirements |
| AS/NZS 2739:2009 | Natural gas (NG) fuel systems for vehicle engines |
| AS/NZS 1200:2000 | Pressure equipment |
| AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
| AS/NZS 2299.1:2007 | Occupational diving operations Standard operational practice |
| AS/NZS 4645.1:2008 | Gas distribution networks Network management |
| AS 2809.3-2008 | Road tank vehicles for dangerous goods Road tank vehicles for compressed liquefied gases |
| AS 1418.8-2008 | Cranes, hoists and winches Special purpose appliances (Reconfirmed 2018) |
| AS 3577-2006 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
| AS 2746-2008 | Working areas for gas-fuelled vehicles |
| AS 2885.2-2007 | Pipelines - Gas and liquid petroleum Welding |
| AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
| AS 3780-2008 | The storage and handling of corrosive substances |
| AS 2885.1-2007 | Pipelines - Gas and liquid petroleum Design and construction |
| AS 2809.2-2008 | Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids |
| AS/NZS 2843.1:2006 | Timber preservation plants Timber preservation plant site design (Reconfirmed 2016) |
| AS 5062-2006 | Fire protection for mobile and transportable equipment |
| AS/NZS 1425:2007 | LP Gas fuel systems for vehicle engines |
| AS/NZS 3788:2006 | Pressure equipment - In-service inspection (Reconfirmed 2017) |
| AS/NZS 1596:2008 | The storage and handling of LP Gas |
| AS 4738.1-2007 | Metal castings Ferrous sand moulded |
| AS 3597-2008 | Structural and pressure vessel steel - Quenched and tempered plate |
| AS 4983-2010 | Gas fuel systems for forklifts and industrial engines |
| AS/NZS 3509:2009 | LP Gas fuel vessels for automotive use (Reconfirmed 2019) |
| AS/NZS 2843.2:2006 | Timber preservation plants Treatment area operation (Reconfirmed 2016) |
| AS/NZS 3788:2001 | Pressure equipment - In-service inspection |
| AS 1548-2008 | Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018) |
| AS 2118.5-2008 | Automatic fire sprinkler systems Home fire sprinkler systems (Reconfirmed 2020) |
| AS 2971-2007 | Serially produced pressure vessels (Reconfirmed 2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.