AS 1357.1-2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Valves primarily for use in heated water systems Protection valves
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
23-05-2024
English
28-01-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Sets out requirements for the design, construction, testing and performance of temperature/pressure relief valves, expansion control valves, non-return valves, temperature relief valves and combination high-pressure expansion non-return valves (HPNR), within the range of DN 15 to DN 50.
| Committee |
WS-026
|
| DocumentType |
Standard
|
| ISBN |
0 7337 8995 1
|
| Pages |
87
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard sets out requirements for the design, construction, testing and performance of the following types of valves, within the range of DN 15 to DN 50:(a) Temperature/pressure-relief valves.(b) Expansion-control valves.(c) Non-return valves.(d) Temperature-relief valves.(e) Combination high-pressure expansion non-return valves (HPNR).(f) Leak-protection devices.The valves specified in this Standard are primarily intended for use in warm and hot water systems that are required to operate at - (a) continuous operating temperatures not exceeding 85°C;(b) temperatures under emergency conditions, not exceeding 99°C; and(c) continuous working pressure not exceeding 1400 kPa.NOTE: For valves used with water heaters, which are intended to operate at temperatures above 99°C (e.g., hot water boilers), see AS 1271.
Originated as AS B271 1968.
AS B271 1968 revised and redesignated AS 1357 1972.
AS 1357 1972 revised and redesignated in part AS 1357.1 1988.
Fourth edition 2009.
| HB 182-2003 | ISO/TR 10200 Legal admissibility of microforms |
| SAA HB18.42-1991 | Guidelines for third-party certification and accreditation - Guide 42 - Guidelines for a step-by-step approach to an international certification system |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 2837-1986 | Wrought alloy steels - Stainless steel bars and semi-finished products |
| HB 18.55-1991 | Guidelines for third-party certification and accreditation - Guide 55: Testing laboratory accreditation systems - General recommendations for operation |
| AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
| HB 18.53-2005 | Conformity assessment - Guidance on the use of an organization’s quality management system in product certification |
| HB 18.67-2005 | Conformity assessment - Fundamentals of product certification |
| SAA/SNZ HB18.7:1994 | Guidelines for third-party certification and accreditation - Guide 7 - Guidelines for drafting of Standards suitable for use for conformity assessment |
| HB 180-2003 | ISO/TR 12036 Micrographics - Expungement, deletion, correction or amendment of records on microforms |
| HB 18.22:2003 | Guidelines for third-party certification and accreditation General criteria for supplier’s declaration of conformity |
| SAA/SNZ HB18.43.2:1998 | Guidelines for third-party certification and accreditation - Guide 43 - Proficiency testing by interlaboratory comparisons Selection and use of proficiency testing schemes by laboratory accreditation bodies |
| HB 181-2003 | ISO/TR 12031 Micrographics - Inspection of silver-gelatin microforms for evidence of deterioration |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
| SAA/SNZ HB18.65:1996 | Guidelines for third-party certification and accreditation - Guide 65: General requirements for bodies operating product certification systems |
| HB 18.16-1991 | Guidelines for third-party certification and accreditation - Guide 16: Code of principles on third-party certification systems and related Standards |
| SAA HB 18.23-1991 | Guidelines for third-party certification and accreditation - Guide 23: Methods of indicating conformity with standards for third-party certification systems (Reconfirmed 2016) |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| SAA/SNZ HB18.61:1996 | Guidelines for third-party certification and accreditation - Guide 61: General requirements for assessment and accreditation of certification/registration bodies |
| AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
| AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
| HB 18.68-2004 | Arrangements for the recognition and acceptance of conformity assessment results (Reconfirmed 2016) (Reconfirmed 2023) |
| AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
| HB 18.60-2005 | Conformity assessment - Code of good practice (Reconfirmed 2016) |
| HB 187-2006 | Guide to selecting a safe multimeter |
| AS 1271-2003 | Safety valves, other valves, liquid level gauges and other fittings for boilers and unfired pressure vessels (Reconfirmed 2016) |
| AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
| SAA/SNZ HB18.43.1:1998 | Guidelines for third-party certification and accreditation Guide 43 - Proficiency testing by interlaboratory comparisons Development and operation of proficiency testing schemes |
| HB 185-2004 | Human Resources - Guidelines on Emerging Good Practice |
| SAA/SNZ HB18.58:1993 | Guideline for third-party certification and accreditation Calibration and testing laboratory accreditation systems - General requirements for operation and recognition |
| HB 18.56-1991 | Guidelines for third-party certification and accreditation - Guide 56: An approach to the review by a certification body of its own internal quality system |
| AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| HB 189-2004 | Knowledge Management Terminology and Readings - An Australian Guide |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS ISO 7.1-2008 | Pipe threads where pressure-tight joints are made on the threads Dimensions, tolerances and designation |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| SAA HB18.27-1991 | Guidelines for third-party certification and accreditation - Guide 27 - Guidelines for corrective action to be taken by a certification body in the event of either misapplication of its mark of conformity to a product, or products which bear the mark of the certification body being found to subject persons or property to risk |
| AS/NZS 5601.1:2013 | Gas installations General installations |
| AS/NZS 5263.1.12:2019 | Gas appliances Gas pool heaters |
| AS/NZS 5601.2:2013 | Gas installations LP Gas installations in caravans and boats for non-propulsive purposes |
| AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
| AS/NZS 5601.1:2010 | Gas installations General installations |
| AS 3498-2009 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
| AS 3814-2009 | Industrial and commercial gas-fired appliances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.