AS 1418.14-1996
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
11-05-2022
English
05-07-1996
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This Standard specifies the requirements for cranes subject to arduous working conditions. It includes sections on performance, structure, mechanisms, electrical equipment, controls, conductors, collector systems, cabs, inspection and commissioning tests. The appendices cover arduous working criteria, and carriage fastening, enquiry and order information to be supplied by manufacturer and manufacturing tolerances. The Standard may be designated in part or parts for cranes with only a limited range of components subjected to arduous duty.
| Committee |
ME/5
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0398 4
|
| Pages |
44
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This Standard specifies the additional requirements to AS 1418.1 for cranes subject to arduous working conditions.
First published as AS 1418.14-1996.
| AS 1403-2004 | Design of rotating steel shafts (Reconfirmed 2016) |
| AS 2549-1996 | Cranes (including hoists and winches) - Glossary of terms |
| AS 1657-1992 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS 3008.1-1989 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV |
| AS/NZS 1891.1:1995 | Industrial fall-arrest systems and devices Safety belts and harnesses |
| AS 1418.3-1997 | Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016) |
| AS 1418.1-2002 | Cranes, hoists and winches General requirements |
| AS/NZS 3947.3:2001 | Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units |
| AS 1418.12-1991 | Cranes (including hoists and winches) Crane collector systems (Reconfirmed 2016) |
| AS 3947.5.1-1995 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices |
| AS 3947.3-1994 | Low-voltage switchgear and controlgear Switches, disconnectors, switch-disconnectors and fuse-combination units |
| AS 3777-1990 | Shank hooks and large-eye hooks - Maximum 25 t |
| AS/NZS 3439.1:2002 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) |
| AS 4024.1(INT)-1992 | Safeguarding of machinery General principles |
| AS/NZS 3947.5.1:2000 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices |
| AS 2074-1982 | Steel castings |
| AS/NZS 3190:2002 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
| AS 1418.1-1994 | Cranes (including hoists and winches) General requirements |
| AS 3190-1994 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
| AS 3000-1986 | Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules) |
| AS 1939-1990 | Degrees of protection provided by enclosures for electrical equipment (IP Code) |
| AS/NZS 1891.1:2007 | Industrial fall-arrest systems and devices Harnesses and ancillary equipment |
| AS 2005.10-1988 | Low voltage fuses - Fuses with enclosed fuse-links General requirements |
| AS 2074-2003 | Cast steels |
| AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 1403-1985 | Design of rotating steel shafts |
| AS 2005.1-1981 | Fuses with enclosed fuse-links (up to and including 1000 V a.c. and 1500 V d.c.) - General requirements |
| AS 2938-1993 | Gears - Spur and helical - Guide to specification and rating |
| AS B66-1969 | Worm gearing (inch series) |
| AS 2184-1985 | Low voltage switchgear and controlgear - Moulded-case circuit-breakers for rated voltages up to and including 600 V a.c. and 250 V d.c. |
| JIS B 1723:1977 | Dimensions of cylindrical worm gears |
| AS 1418.3-1997 | Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016) |
| AS 2550.1-2011 | Cranes, hoists and winches - Safe use General requirements |
| AS/NZS 1170.1:2002 | Structural design actions Permanent, imposed and other actions |
| AS 1418.1-2002 | Cranes, hoists and winches General requirements |
| AS/NZS 1891.4:2009 | Industrial fall-arrest systems and devices Selection, use and maintenance |
| AS 1418.8-2008 | Cranes, hoists and winches Special purpose appliances (Reconfirmed 2018) |
| AS 5804.1-2010 | High-voltage live working General |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 4991-2004 | Lifting devices |
| AS 2089-2008 | Sheave blocks for lifting purposes (Reconfirmed 2019) |
| AS 2550.3-2002 | Cranes, hoists and winches - Safe use Bridge, gantry, portal (including container cranes) and jib cranes |
| AS/NZS 1170.0:2002 | Structural design actions General principles |
| AS 2321:2014 | Short-link chain for lifting purposes |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.