AS 1566-1997
Current
The latest, up-to-date edition.
Copper and copper alloys - Rolled flat products (Reconfirmed 2018)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-12-1997
Specifies requirements for copper and copper alloy plate, rolled bar, sheet, strip and foil for general engineering purposes. It also specifies requirements for copper for electrical purposes (alloys C11000 and C12200) and for automotive radiators (alloy C14410). Chemical composition, mechanical properties and manufacturing tolerances are specified, and appendices give purchasing guidelines and information on related composition specifications.
Committee |
MT/2
|
DocumentType |
Standard
|
ISBN |
0 7337 1427 7
|
Pages |
17
|
ProductNote |
Reconfirmed 14/09/2018.
This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 14/09/2018 |
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard specifies requirements for copper and copper alloy plate, rolled bar, sheet, strip and foil for general engineering purposes. It also specifies requirements for copper for electrical purposes (alloys C11000 and C12200) and automotive radiators (alloy C14410).NOTE: Advice and recommendations on information to be supplied at the time of inquiry or order are contained in the purchasing guidelines set out in Appendix A.
Originated in part as part of AS E8-1925.
Previous edition AS 1566-1985.
Third edition 1997.
AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
AS 2505.1-1981 | Methods for bend and related testing of metals Sheet, strip and plate |
AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
AS 2338-2004 | Preferred dimensions of wrought metal products |
AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
AS 2338-1980 | Preferred dimensions of wrought metal products |
AS 1696.1-1987 | Copper Determination of phosphorus - Spectrophotometric method |
AS 1391-1991 | Methods for tensile testing of metals |
AS 2505.1-2004 | Metallic materials Sheet, strip and plate - Bend tests |
AS 2614-1998 | Copper and copper alloys - Sampling for chemical and spectrochemical analysis, and physical testing (Reconfirmed 2016) |
AS 1817-1991 | Metallic materials - Vickers hardness test |
AS 1733-1976 | Methods for the determination of grain size in metals (Reconfirmed 2018) |
AS 1515.1-1994 | Copper alloys Determination of lead in copper alloys (flame atomic absorption spectrometric method) (Reconfirmed 2016) |
AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
AS 1056.3-1991 | Storage water heaters - Specific requirements for water heaters with composite shells |
AS 2345-1992 | Dezincification resistance of copper alloys |
AS 1056.2-1985 | Storage water heaters - Specific requirements for water heaters with single shells |
AS/NZS 2904:1995 | Damp-proof courses and flashings |
AS/NZS 1768:2007 | Lightning protection |
AS 1768-1991 | Lightning protection |
AS 1682.1-1990 | Fire dampers Specification |
AS/NZS 4692.1:2005 | Electric water heaters Energy consumption, performance and general requirements (Reconfirmed 2016) |
AS/NZS 3500.4.2:1997 | National Plumbing and Drainage Hot water supply systems - Acceptable solutions |
AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
AS/NZS 3500.2:2003 | Plumbing and drainage Sanitary plumbing and drainage |
AS/NZS 3500.2.2:1996 | National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions |
AS 1562.1:2018 | Design and installation of metal roof and wall cladding Metal |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS 3500.1-1992 | National Plumbing and Drainage Code Water supply |
AS 4041-1992 | Pressure piping |
AS 3740-2010 | Waterproofing of domestic wet areas |
AS 1321.2-1975 | Methods for the sampling and testing of adhesives Corrosive effect of set adhesives on metals |
AS 3740-2004 | Waterproofing of wet areas within residential buildings |
AS 1361-1995 | Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016) |
AS 4285:2019 | Rooflights |
ATS 5200.026-2004 | Technical Specification for plumbing and drainage products Cold water storage tanks |
AS 2712-1993 | Solar water heaters - Design and construction |
AS 2437-1987 | Flusher/sanitizers for bed pans and urine bottles |
AS/NZS 3500.5:2000 | Plumbing and Drainage Domestic installations |
AS 3500.4-1994 | National Plumbing and Drainage Code Hot water supply systems |
AS 1210-1997 | Pressure vessels |
AS 1562.1-1992 | Design and installation of sheet roof and wall cladding Metal (Reconfirmed 2016) |
AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
AS 2345-2006 | Dezincification resistance of copper alloys |
AS/NZS 2179.1:1994 | Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners |
AS/NZS 2785:2000 | Suspended ceilings - Design and installation |
AS 4285-1995 | Skylights |
AS 4285-2007 | Skylights |
AS/NZS 1768(INT):2003 | Lightning protection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.