Skip to content
Please enter a keyword to search
  • Preview

    AS/NZS 3500.2:2003

    AvailableSuperseded An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

    Plumbing and drainage Sanitary plumbing and drainage

    Available format(s):  Hardcopy, Hardcopy with incorporated amendment, PDF 1 User, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s): 

    Published date:  15-12-2003

    Publisher:  Standards Australia

    Add To Cart

    Abstract - (Show below) - (Hide below)

    This Standard specifies the requirements for the design and installation of sanitary plumbing and drainage from the fixtures to a sewer, common effluent system or an on-site wastewater management system, as appropriate.

    Scope - (Show below) - (Hide below)

    This Standard specifies the requirements for the design and installation of sanitary plumbing and drainage from the fixtures to a sewer, common effluent system or an on-site wastewater management system, as appropriate. The Standard applies to new installations as well as alterations, additions or repairs to existing installations. Illustrations used in this Standard are diagrammatic only and have been chosen without prejudice. NOTE: The pre-treatment of trade wastes is not specified in this Standard.

    General Product Information - (Show below) - (Hide below)

    Committee WS-014
    Document Type Standard
    Publisher Standards Australia
    Status AvailableSuperseded
    Superseded By
    Supersedes
    Under Revision

    History - (Show below) - (Hide below)

    First published as AS 3500.2-1990.Jointly revised and redesignated AS/NZS 3500.2.2:1996.AS/NZS 3500.2.2:1996 jointly revised and redesignated as AS/NZS 3500.2:2003. Originated as AS 3500.2-1990. Previous edition AS/NZS 3500.2.2:1996. AS/NZS 3500.2.2:1996 jointly revised and redesignated as AS/NZS 3500.2:2003. Reissued incorporating Amendment No. 1 (November 2005). Reissued incorporating Amendment No. 2 (August 2006). Reissued incorporating Amendment No. 3 (December 2010). Reissued incorporating Amendment No. 4 (December 2011).

    Standards Referenced By This Book - (Show below) - (Hide below)

    AS 1432-1996 Copper tubes for plumbing, gasfitting and drainage applications
    AS/NZS 1167.2:1999 Welding and brazing - Filler metals Filler metal for welding
    AS 1379-1997 Specification and supply of concrete
    AS 1428.3-1992 Design for access and mobility Requirements for children and adolescents with physical disabilities
    MP 52-2001 Manual of authorization procedures for plumbing and drainage products
    AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
    AS/NZS 4671:2001 Steel reinforcing materials
    AS/NZS 3000:2000 Electrical installations (known as the Australian/New Zealand Wiring Rules)
    AS/NZS 3500.1:2003 Plumbing and drainage Water services
    AS/NZS 1546.1:1998 On-site domestic wastewater treatment units - Septic tanks
    AS 1428.2-1992 Design for access and mobility Enhanced and additional requirements - Buildings and facilities (Reconfirmed 2015)
    AS 2033-1980 Installation of polyethylene pipe systems
    AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
    AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
    AS 1631-1994 Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018)
    AS 1428.4-1992 Design for access and mobility Tactile ground surface indicators for the orientation of people with vision impairment
    AS 3517-1995 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
    AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
    AS 2129-2000 Flanges for pipes, valves and fittings (Reconfirmed 2016)
    AS/NZS 4401(INT):1999 High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings - Specifications
    AS 3688-2005 Water supply - Metallic fittings and end connectors
    AS/NZS 3500.4:2003 Plumbing and drainage Heated water services
    AS 4087-2004 Metallic flanges for waterworks purposes
    AS 1604.1-2000 Specification for preservative treatment - Sawn and round timber
    AS 3600-2001 Concrete structures
    AS 1604.1-2005 Specification for preservative treatment - Sawn and round timber
    AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
    AS/NZS 1167.1:2005 Welding and brazing - Filler metals Filler metal for brazing and braze welding
    AS 1345-1995 Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018)
    AS/NZS 3500.0:2003 Plumbing and drainage Glossary of terms
    MP 52-2005 Manual of authorization procedures for plumbing and drainage products
    AS/NZS 3879:1995 Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings
    AS 1657-1992 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
    AS 1646-2007 Elastomeric seals for waterworks purposes (Reconfirmed 2018)
    AS 3501-1987 Parallel screw threads of whitworth form (BSW and BSF) and associated gauges and gauging practice (Reconfirmed 2017)
    AS/NZS 2878:2000 Timber - Classification into strength groups
    AS 1566-1997 Copper and copper alloys - Rolled flat products (Reconfirmed 2018)
    AS/NZS 2648.1:1995 Underground marking tape Non-detectable tape (Reconfirmed 2020)
    AS 1478.1-2000 Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018)
    AS 1167.1-1993 Welding and brazing - Filler metals Filler metal for brazing and braze welding
    AS 2032-1977 Code of practice for installation of UPVC pipe systems
    AS/NZS 4331.1:1995 Metallic flanges Steel flanges (Reconfirmed 2020)
    AS 3688-1994 Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors
    AS 3706.0-2003 Geotextiles - Methods of test General introduction and list of methods (Reconfirmed 2018) (Reconfirmed 2023)
    AS 4087-1996 Metallic flanges for waterworks purposes
    AS/NZS 3500.5:2000 National Plumbing and Drainage - Domestic installations
    AS 1741-1991 Vitrified clay pipes and fittings with flexible joints - Sewer quality (Reconfirmed 2018)
    AS 1074-1989 Steel tubes and tubulars for ordinary service (Reconfirmed 2018)
    AS 3795-1996 Copper alloy tubes for plumbing and drainage applications
    AS/NZS 4936:2002 Air admittance valves (AAVs) for use in sanitary plumbing and drainage systems (Reconfirmed 2020)
    AS/NZS 4999(INT):2003 PVC-U maintenance shafts
    AS/NZS 3500.3:2003 Plumbing and drainage Stormwater drainage
    AS 1428.1-2001 Design for access and mobility General requirements for access - New building work
    AS 1379-2007 Specification and supply of concrete (Reconfirmed 2017)
    AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
    AS 3517-2007 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018)
    AS 4139-2003 Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018)
    AS 1589-2001 Copper and copper alloy waste fittings (Reconfirmed 2018)
    AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application
    AS/NZS 4680:1999 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles

    Standards Referencing This Book - (Show below) - (Hide below)

    ATS 5200.469-2005 Technical Specification for plumbing and drainage products Waterless or limited flush urinals - With an integral sealing device
    AS 4553-2008 Gas space heating appliances
    AS/NZS 1547:2012 On-site domestic wastewater management
    AS 2870-1996 Residential slabs and footings - Construction
    ATS 5200.047-2005 Technical Specification for plumbing and drainage products Self-sealing devices
    ATS 5200.499-2008 Technical Specification for plumbing and drainage products Inline sewer dosing unit (SDU)
    AS/NZS 2982:2010 Laboratory design and construction
    ATS 5200.051-2005 Technical Specification for plumbing and drainage products Bidet douche seats
    AS/NZS 1546.3:2008 On-site domestic wastewater treatment units Aerated wastewater treatment systems
    AS/NZS 1546.1:2008 On-site domestic wastewater treatment units Septic tanks
    AS/NZS 2845.1:2010 Water supply - Backflow prevention devices Materials, design and performance requirements
    AS 5200.037.2-2008 Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016)
    ATS 5200.040-2005 Waste pipe connection outlets and gratings, separate or integral
    AS 4125.1-2009 Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management
    ATS 5200.020-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply
    ATS 5200.050-2005 Technical Specification for plumbing and drainage products Prefabricated bathroom modules
    ATS 5200.104-2005 Appliances (miscellaneous)
    AS 5830.1-2012 In-line ball valves for use in plumbing water supply systems Metal-bodied
    ATS 5200.055-2008 Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications
    AS 1172.2:2014 Sanitary plumbing products Flushing devices and cistern inlet and outlet valves
    ATS 5200.028-2004 Technical Specification for plumbing and drainage products - Commercial food waste disposal unit
    AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
    ATS 5200.471-2005 Technical specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications - Alternative systems
    ATS 5200.425-2009 Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system
    AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applications
    AS/NZS 1260:2009 PVC-U pipes and fittings for drain, waste and vent application
    HB 230-2008 Rainwater Tank Design and Installation Handbook
    ATS 5200.037.2-2005 Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems
    AS 1172.1:2014 Sanitary plumbing products Water closet pans
    ATS 5200.420-2005 Technical Specification for plumbing and drainage products Trap-priming valves
    ATS 5200.501-2011 Technical Specification for plumbing and drainage products Anti-infiltration overflow-relief device
    ATS 5200.459-2004
    ATS 5200.501-2009 Technical Specification for plumbing and drainage products Anti-infiltration overflow relief point
    AS 4176.2-2010 Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022)
    AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
    HB 326-2008 Urban Greywater Installation Handbook for Single Households
    ATS 5200.101-2005 Appliances (low hazard rating)
    ATS 5200.021-2004 Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply
    ATS 5200.482-2006 Technical Specification for plumbing and drainage products Soil waste dump fitting
    HB 230-2006 Rainwater Tank Design and Installation Handbook
    AS/NZS 2243.3:2010 Safety in laboratories Microbiological safety and containment
    AS/NZS 3982:1996 Urinals
    ATS 5200.460-2004 Technical Specification for plumbing and drainage products Grey water diversion valve assembly
    AS/NZS 1546.2:2008 On-site domestic wastewater treatment units Waterless composting toilets
    AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017)
    AS 4995-2009 Greywater treatment systems for vessels operated on inland waters
    ATS 5200.006-2005 Technical Specification for plumbing and drainage products Reflux valves - Sewerage
    AS/NZS 3666.1:2011 Air-handling and water systems of buildings - Microbial control Design, installation and commissioning
    AS 5830.2-2012 In-line ball valves for use in plumbing water supply systems Plastics-bodied
    AS/NZS 3500.3:2015 Plumbing and drainage Stormwater drainage
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective