AS 1657-2013
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Fixed platforms, walkways, stairways and ladders - Design, construction and installation
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
10-12-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.Sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel.
| Committee |
SF-013
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 634 0
|
| Pages |
93
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel.This Standard also applies to the following:(a) Movable platforms that are permanently configured but that may be site adjustable or site assembled/modified.(b) Permanently installed roof access, where such access is for the purpose of installing, operating, inspecting, maintaining or servicing equipment that is located on, or is accessible from, the roof.(c) Permanently installed access for inspection and maintenance of the roof itself.NOTE: This Standard may also be used for guidance in providing access to some parts of mobile plant, light and telecommunication towers, wind turbine towers and water and sewerage facilities. While such access may not be capable of complying with all the requirements of this Standard, the principles and imposed actions should be followed.
First published as CA10-1938.
Fourth edition 1971.
Revised and redesignated AS1657-1974.
Fourth edition 2013.
Reissued incorporating Amendment No. 1 (June 2016).
| AS 1192-2004 | Electroplated coatings - Nickel and chromium (Reconfirmed 2017) |
| AS 1790-1984 | Electroplated coatings - Cadmium on iron or steel |
| AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
| AS/RISSB 7720 : 2017 | Signalling Equipment Enclosure and Wiring |
| AS 1111.1-2000 | ISO metric hexagon bolts and screws - Product grade C - Bolts |
| AS/NZS 1891.4:2009 | Industrial fall-arrest systems and devices Selection, use and maintenance |
| AS/NZS 1891.1:2007 | Industrial fall-arrest systems and devices Harnesses and ancillary equipment |
| AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
| AS 3566.2-2002 | Self-drilling screws for the building and construction industries - Corrosion resistance requirements |
| AS/NZS 4600:2005 | Cold-formed steel structures |
| AS/NZS 1891.2:2001 | Industrial fall-arrest systems and devices Horizontal lifeline and rail systems |
| AS/NZS 1170.2:2011 | Structural design actions Wind actions (Reconfirmed 2016) |
| AS 4663-2013 | Slip resistance measurement of existing pedestrian surfaces |
| AS/NZS 1170.0:2002 | Structural design actions General principles |
| AS/NZS 1554.1:2011 | Structural steel welding Welding of steel structures |
| AS/NZS 1170.2:2002 | Structural design actions Wind actions |
| AS 3700 Supp 1-2012 | Masonry structures - Commentary (Supplement 1 to AS 3700 - 2011) |
| AS/NZS 1554.6:2012 | Structural steel welding Welding stainless steels for structural purposes |
| AS 3600-2009 | Concrete structures |
| AS/NZS 3661.2:1994 | Slip resistance of pedestrian surfaces Guide to the reduction of slip hazards |
| AS/NZS 1664.2:1997 | Aluminium structures Allowable stress design (Reconfirmed 2020) |
| AS 4100-1998 | Steel structures (Reconfirmed 2016) |
| AS 4100 SUPP 1-1999 | Steel structures - Commentary (Supplement to AS 4100-1998) |
| AS/NZS 4600 SUPP 1:1998 | Cold-formed steel structures - Commentary (Supplement to AS/NZS 4600:1996) |
| AS/NZS 1170.1:2002 | Structural design actions Permanent, imposed and other actions |
| HB 197:1999 | An introductory guide to the slip resistance of pedestrian surface materials |
| AS 3700-2011 | Masonry structures |
| AS 1604.1-2012 | Specification for preservative treatment Sawn and round timber |
| AS/NZS 1891.3:1997 | Industrial fall-arrest systems and devices - Fall-arrest devices |
| AS 1720.1-2010 | Timber structures Design methods |
| AS/NZS 1604.3:2012 | Specification for preservative treatment Plywood |
| AS 4586-2013 | Slip resistance classification of new pedestrian surface materials |
| AS/NZS 1252:1996 | High-strength steel bolts with associated nuts and washers for structural engineering |
| AS/NZS 1665:2004 | Welding of aluminium structures (Reconfirmed 2016) |
| AS/NZS 4792:2006 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017) |
| AS/NZS 4791:2006 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017) |
| AS 1940:2017 | The storage and handling of flammable and combustible liquids |
| AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
| AS 5100.2:2017 | Bridge design Design loads |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
| AS/NZS 1596:2014 | The storage and handling of LP Gas |
| AS 4324.1:2017 | Mobile equipment for continuous handling of bulk materials General requirements for the design of steel structures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.