AS 1816-1990
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Metallic materials - Brinell hardness test
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
30-06-2017
English
01-01-1990
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Sets out requirements for measuring the Brinell hardness of metals and for the installation, calibration and maintenance of the testing machine. It also specifies requirements for the calibration of standard hardness blocks and ball indenters. In this edition, the testing and calibration requirements have been combined into one Standard.
| Committee |
MT-006
|
| DocumentType |
Standard
|
| ISBN |
0 7262 6461 X
|
| Pages |
29
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard sets out methods for measuring the hardness of metals and metal products on scales of Brinell hardness. It includes requirements for the installation and calibration of the testing machine, and recommendations for its maintenance by the user.NOTE: In some Brinell hardness testing machines, the indentation measuring apparatus is integral with the machine. In others, the function of the machine is limited to the indenting process, the measurement of the indentation being made separately. It is acceptable, therefore, for the indenting process to be performed in a compression testing machine which has suitable indenter attachments and which can apply the appropriate force in accordance with this Standard.This Standard does not preclude the use of portable hardness testing machines which meet those requirements of Section 2 which are appropriate to non-portable machines.
Under Revision see DR 02227.
Under Revision see DR 02395 CP.
Under Revision see DR 02398 CP
| AS 1817.1-1976 | Method for Vickers hardness test - Testing of metals |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS 2193-1978 | Methods for calibration and grading of force-measuring systems of testing machines |
| AS 1444-1996 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties |
| AS 2740-2001 | Wedge-type sockets |
| AS 1831-2002 | Ductile cast iron |
| AS 2319-2001 | Rigging screws and turnbuckles |
| AS 1085.12-1999 | Railway permanent way materials - Part 12: Insulated joint assemblies |
| AS 2947.3-1995 | Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Couplings |
| AS 1138-1992 | Thimbles for wire rope |
| AS 2089-1993 | Sheave blocks for lifting purposes |
| AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
| AS 1796-1993 | Certification of welders and welding supervisors |
| AS 2280-1991 | Ductile iron pressure pipes and fittings |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS/NZS 2544:1995 | Grey iron pressure fittings |
| AS 1832-2002 | Malleable cast iron |
| AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
| AS 1449-1994 | Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip |
| AS 1085.15-1995 | Railway permanent way material Aluminothermic rail welding |
| AS/NZS 4291.2:1995 | Mechanical properties of fasteners Nuts with specified proof load values - Coarse thread |
| AS/NZS 4291.1:1995 | Mechanical properties of fasteners Bolts, screws and studs |
| AS 1817-1991 | Metallic materials - Vickers hardness test |
| AS/NZS 4344:1995 | Cargo restraint systems - Transport chain and components |
| AS 2317-1998 | Collared eyebolts |
| AS/NZS 4344:2001 | Motor vehicles - Cargo restraint systems - Transport chain and components |
| AS 1085.1-2000 | Railway permanent way material Steel rails |
| AS/NZS 2280:1995 | Ductile iron pressure pipes and fittings |
| AS 1085.11-1992 | Railway permanent way material Head-hardened rails |
| AS 4291.1-2000 | Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs |
| AS/NZS 4291.5:1995 | Mechanical properties of fasteners Set screws and similar threaded fasteners not under tensile stress |
| AS 2741-1992 | Shackles |
| AS 1418.7-1999 | Cranes (including hoists and winches) Builders hoists and associated equipment |
| AS 1085.12-2002 | Railway track material Insulated joint assemblies (Reconfirmed 2013) |
| AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
| AS 1866:1997 | Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020) |
| AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
| AS 2903-1986 | Helical springs for railway rolling stock |
| AS/NZS 2438.1:1994 | Drills and reamers Specification for twist drills |
| AS 2741-2002 | Shackles (Reconfirmed 2014) |
| AS 4291.5-2000 | Mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners not under tensile stress |
| AS/NZS 1801:1997 | Occupational protective helmets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.