AS 1910-2004
Current
The latest, up-to-date edition.
Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
07-07-2004
This Standard specifies requirements for active float control valves for use in water supply systems where the normal working temperature does not exceed 95°C and the continuous working pressure extends up to a maximum of 1.4 MPa for a range of nominal sizes from DN 6 to DN 80.
Committee |
WS-001
|
DocumentType |
Standard
|
ISBN |
0 7337 6073 2
|
Pages |
17
|
ProductNote |
Reconfirmed 03/06/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 03/06/2016
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes | |
UnderRevision |
This Standard specifies requirements for active float control valves for use in water supply systems where the normal working temperature does not exceed 95°C and the continuous working pressure extends up to a maximum of 1.4 MPa for a range of nominal sizes from DN 6 to DN 80.This Standard does not cover WC cistern flushing valves.NOTE: WC cistern flushing valves are covered in all parts of AS 1172. Means of demonstrating compliance with this Standard are set out in Appendix A.
Originated as AS 1910-1976.
Previous edition AS 1910-1994.
Third edition 2004.
Reissued incorporating Amendment No. 1 (July 2006).
AS 3558.17-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of shower bases and shower modules |
AS 3558.7-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of laundry troughs (Reconfirmed 2016) |
AS 3558.5-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of degradation by ultraviolet light (Reconfirmed 2016) |
AS 3558.13-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal distortion of baths for ablutionary purposes |
AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
AS 1881-1986 | ZINC ALLOYS - CASTING INGOTS AND CASTINGS - QUALITY REQUIREMENTS (Reconfirmed 2018) |
AS 1167.1-1993 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
AS 3558.22-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal distortion of sinks (Reconfirmed 2016) |
AS 3558.4-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to surface scratching (Reconfirmed 2016) |
AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 3558.24-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to hot liquids of the surface of sinks |
AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
AS 3558.10-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal expansion under load of laundry troughs |
AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
AS 3558.6-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Visual examination of surface finish for defects (Reconfirmed 2016) |
AS 2345-2006 | Dezincification resistance of copper alloys |
AS 3558.9-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal distortion of laundry troughs (Reconfirmed 2016) |
AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
AS 3558.3-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of colour fastness |
AS/NZS 4020:2002 | Testing of products for use in contact with drinking water |
AS 3558.23-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to heat of the surface of sinks |
AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
AS 3558.20-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to thermal shock of sinks |
AS 3558.2-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of chemical and stain resistance |
AS 1172.2-1999 | Water closet (WC) pans of 6/3 L capacity or proven equivalent Cisterns |
AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
AS 3558.1-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of water absorption characteristics |
AS 2345-1992 | Dezincification resistance of copper alloys |
AS 2074-2003 | Cast steels |
AS 1567-1985 | Copper and copper alloys - Wrought rods, bars and sections |
AS 3688-2005 | Water supply - Metallic fittings and end connectors |
AS 1172.1-1993 | Water closets of 6/3 L capacity - Pans |
AS 3558.12-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to thermal shock of baths for ablutionary purposes (Reconfirmed 2016) |
AS 1172-1989 | Water closet pans |
AS 3558.18-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to thermal shock of shower bases and shower modules |
AS 3558.15-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of washbasins |
AS 3558.19-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of sinks (Reconfirmed 2016) |
AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
AS 3558.16-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to thermal shock of washbasins |
AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
AS 1568-1985 | Copper and copper alloys - Forging stock and forgings |
AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
AS 3558.21-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal expansion under load of sinks (Reconfirmed 2016) |
AS 3558.14-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of thermal expansion under load of baths for ablutionary purposes |
AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
AS 3558.8-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of resistance to thermal shock of laundry troughs |
AS 3558.0-1989 | Methods of testing plastics and composite materials sanitary plumbing fixtures Introduction and list of methods |
AS 3558.11-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of baths for ablutionary purposes |
AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
AS 1361-1995 | Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016) |
AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.