• There are no items in your cart

AS 2030.2-1996

AvailableSuperseded

AvailableSuperseded

An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

05-10-1996

€26.31
Excluding VAT

This Standard introduces the concepts of blowdown rack as a safety measure for dealing with leaking or damaged cylinders. It also introduces the concept of a loose identification collar. The collar is to carry the cylinder identification marks and is retained by the cylinder valve. These two new concepts will enhance safety in the use of acetylene gas.

Committee
ME/2
DocumentType
Standard
ISBN
0 7337 0741 6
Pages
7
ProductNote
Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
PublisherName
Standards Australia
Status
AvailableSuperseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies requirements for the acceptance, filling, inspection, and care of refillable gas cylinders for the storage of compressed acetylene dissolved in a solvent, and having a cylinder shell water capacity exceeding 5 kg.NOTES:1 Requirements for cylinders for gases other than acetylene are specified in AS 2030.1.2 This Standard provides for solvents other than acetone, but only dimethylformamide (DMF) has been specifically considered as an alternative and DMF should be used only where cylinders are in manifolded crates.3 The requirements of this Standard are not intended to preclude the filling of previously acceptable, and not specifically provided for, small dissolved acetylene gas cylinders (of nominal water capacities 5.0 to 11 kg).

Originated as part of AS CB4-1931.
Previous edition part of AS 2030.2-1985.
Second edition 1996.
Reissued incorporating Amendment Nos 1 and 2 (September 2000).

AS 1678.2A1-2004 Emergency procedure guide - Transport - Flammable, compressed gas (Reconfirmed 2016)
AS 2470-2005 Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016)
AS 2874-1986 High tensile carbon-manganese steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg
AS 2875-1995 Alloy steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg
AS 2473-1990 Valves for compressed gas cylinders (threaded outlet)
AS 2469-2005 Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg
AS 2873-1986 Carbon-manganese steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg
AS 2527-1997 Cylinders for dissolved acetylene
AS 2470-1998 Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg
AS 2469-1998 Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 35 kg
AS 1678.2A1-1987 Emergency procedure guide - Transport - Group text EPGs for Class 2 substances - Compressed and liquefied gases - Flammable, compressed gas
AS 2337.1-1999 Gas cylinder test stations General requirements, inspections and tests - Gas cylinders
AS 2508.2.001-1992 Safe storage and handling information card - Acetylene (Dissolved) (Ethyne)
AS 2527-2006 Cylinders for dissolved acetylene
AS/NZS ISO 9001:1994 Quality systems - Model for quality assurance in design, development, production, installation and servicing
AS/NZS ISO 9001:2000 Quality management systems - Requirements
AS 2473-1996 Valves for compressed gas cylinders (threaded outlet)
AS 2030.1-1999 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene
AS 1943-1987 Industrial gas cylinder identification
AS 2337.1-2004 Gas cylinder test stations General requirements, inspection and tests - Gas cylinders

AS 1470-1986 Health and safety at work - Principles and practices
AS/NZS 1716:2012 Respiratory protective devices
AS 5483-2012 Minimizing the risk of contamination in products used to collect and analyse biological material for forensic DNA purposes
AS/NZS 2243.1:1997 Safety in laboratories General
AS 5388.1-2012 Forensic analysis Recognition, recording, recovery, transport and storage of material
AS 2809.1-2008 Road tank vehicles for dangerous goods General requirements for all road tank vehicles
AS 1843-1976 Foam (chemical) type portable fire extinguishers
AS/NZS 1200:2000 Pressure equipment
AS 2809.1-1999 Road tank vehicles for dangerous goods - General requirements
AS 3200-1986 Approval and test specification - Electromedical equipment - General requirements
AS 4037-1992 Boilers and pressure vessels - Examination and testing
AS/NZS 60079.10.1:2009 Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD)
AS 4484-1997 Industrial, medical and refrigerant compressed gas cylinder identification
AS/NZS 5601.2:2020 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
AS 2527-1997 Cylinders for dissolved acetylene
AS 2030.1-2009 Gas cylinders General requirements
AS 1840-1976 Water type portable fire extinguishers - Water (soda acid) type
AS/NZS 3788:1996 Pressure equipment - In-service inspection
AS/NZS 3130:1995 Approval and test specification - Beauty therapy equipment
AS 2030.1-1999 The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS 4332-2004 The storage and handling of gases in cylinders (Reconfirmed 2016)
AS 2527-2006 Cylinders for dissolved acetylene
AS 2473-1996 Valves for compressed gas cylinders (threaded outlet)
AS/NZS 2430.3.1:2004 Classification of hazardous areas Examples of area classification - General
AS/NZS 3788:2006 Pressure equipment - In-service inspection (Reconfirmed 2017)
HB 13-2007 Electrical equipment for hazardous areas
AS 4484:2016 Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour coding
AS 3580.2.2-1990 Methods for sampling and analysis of ambient air Preparation of reference test atmospheres - Compressed gas method
HB 13-2000 Electrical equipment for hazardous areas
AS 4484-2004
AS/NZS 3788:2001 Pressure equipment - In-service inspection
AS 2030.5-2009 Gas cylinders Filling, inspection and testing of refillable cylinders
AS 2971-2002 Serially produced pressure vessels
AS 2971-2007 Serially produced pressure vessels (Reconfirmed 2017)
AS 4332-1995 The storage and handling of gases in cylinders

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.