AS 2030.4-1985
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Welded cylinders - Insulated
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
15-12-2023
31-01-1985
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for welded cylinders of water capacity not less than 0.1kg and not greater than 500kg that are insulated (in particular those manufactured to specification DOT 4L), and intended for storage and transport of fluids. These fluids are generally cryogenic.
| Committee |
ME/2
|
| DocumentType |
Standard
|
| ISBN |
0 7262 3655 1
|
| Pages |
3
|
| ProductNote |
Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This standard sets out requirements for markings, filling procedures, inspecting and testing, fittings and safe handling of gas cylinders incorporating an insulated stainless steel inner vessel, used for the storage and transport of fluids including those listed in Table 1, and of water capacity not less than 0.1 kg and not greater than 500 kg.NOTES:1. The standard is particularly directed to use of cylinders complying with (U.S.) Department of Transportation Specification 4L.2. The requirements specified for cylinder contents traffic change do not provide for medical gases.3. AS 1894 provides requirements for the safe handling of cryogenic fluids.
First published 1985.
Incorporating: Amdt 1-1999
| AS 2473-1996 | Valves for compressed gas cylinders (threaded outlet) |
| AS 1943-1987 | Industrial gas cylinder identification |
| MP 48-2007 | Certificated gas cylinder test stations |
| AS 1894-1997 | The storage and handling of non-flammable cryogenic and refrigerated liquids (Reconfirmed 2021) |
| AS 2030.1-1999 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene |
| AS 1942-1987 | Refrigerant gas cylinder identification |
| AS 1944-1987 | Medical gas cylinder identification |
| AS 1470-1986 | Health and safety at work - Principles and practices |
| AS/NZS 1716:2012 | Respiratory protective devices (Reconfirmed 2024) |
| AS 5483-2012 | Minimizing the risk of contamination in products used to collect and analyse biological material for forensic DNA purposes |
| AS/NZS 2243.1:1997 | Safety in laboratories General |
| AS 5388.1-2012 | Forensic analysis Recognition, recording, recovery, transport and storage of material |
| AS 2809.1-2008 | Road tank vehicles for dangerous goods General requirements for all road tank vehicles |
| AS 1843-1976 | Foam (chemical) type portable fire extinguishers |
| AS/NZS 1200:2000 | Pressure equipment |
| AS 2809.1-1999 | Road tank vehicles for dangerous goods - General requirements |
| AS 3200-1986 | Approval and test specification - Electromedical equipment - General requirements |
| AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
| AS 1894-1997 | The storage and handling of non-flammable cryogenic and refrigerated liquids (Reconfirmed 2021) |
| AS/NZS 5601.2:2020 | Gas installations LP Gas installations in caravans and boats for non-propulsive purposes |
| AS 2030.1-2009 | Gas cylinders General requirements |
| AS 1840-1976 | Water type portable fire extinguishers - Water (soda acid) type |
| AS/NZS 3788:1996 | Pressure equipment - In-service inspection |
| AS/NZS 3130:1995 | Approval and test specification - Beauty therapy equipment |
| AS 2030.1-1999 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene |
| AS/NZS 2243.1:2005 | Safety in laboratories Planning and operational aspects |
| AS 4332-2004 | The storage and handling of gases in cylinders (Reconfirmed 2016) |
| AS/NZS 2430.3.1:2004 | Classification of hazardous areas Examples of area classification - General |
| AS/NZS 3788:2006 | Pressure equipment - In-service inspection (Reconfirmed 2017) |
| AS 5034-2005 | Installation and use of inert gases for beverage dispensing |
| HB 13-2007 | Electrical equipment for hazardous areas |
| AS 4484:2016 | Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour coding |
| AS 3580.2.2-1990 | Methods for sampling and analysis of ambient air Preparation of reference test atmospheres - Compressed gas method |
| HB 13-2000 | Electrical equipment for hazardous areas |
| AS/NZS 3788:2001 | Pressure equipment - In-service inspection |
| AS 2030.5-2009 | Gas cylinders Filling, inspection and testing of refillable cylinders |
| AS 2971-2002 | Serially produced pressure vessels |
| AS 2971-2007 | Serially produced pressure vessels (Reconfirmed 2017) |
| AS 4332-1995 | The storage and handling of gases in cylinders |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.