AS 2327.1-1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Composite structures - Simply supported beams
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
21-10-2020
English
01-01-1996
Sets out minimum requirements for the design, detailing and construction of simply supported composite beams composed of a steel beam interconnected to a concrete slab by shear connectors, including applications in which the slab incorporates profiled steel sheeting. Covers strength and serviceability design for flexure, transverse and longitudinal shear and their interdependence as well as design for fire-resistance. Permits the use of partial shear connection and a wider variety of steel beam sections and shear connector types than previously allowed. Includes detail requirements for construction loads, slab reinforcement and sheer connector positioning, along and transverse to the beam length. Also included are a number of appendices containing design flowcharts and other helpful information.
Committee |
BD-032
|
DocumentType |
Standard
|
ISBN |
0 7337 0747 5
|
Pages |
108
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This Standard sets out minimum requirements for the design, detailing and construction of simply supported composite beams composed of a steel beam and a concrete slab interconnected with shear connectors, including applications where the slab incorporates profiled steel sheeting, as defined in Clause 1.2.This Standard does not cover the design of composite beams -(a) where the elements of the steel beam are less than 3 mm thick or the value of the yield stress (fyb) assumed in design exceeds 450 MPa (see Note 1);(b) where the strength grade of the slab concrete exceeds 40 MPa;(c) where the slab is precast or prestressed; (d) with negative design moments (see Note 2); (e) subjected to dynamic loads;(f) for road or railway bridges (see Note 3); or (g) for fatigue.NOTES:1 This does not preclude the use of steels with a minimum yield strength greater than 450 MPa.2 For the design of composite beams with negative design moments reference may be made to BS 5950:3:1990, Code of Practice for Design of Simple and Continuous Composite Beams.3 For the design of composite bridge beams, reference should be made to the AUSTROADS Bridge Design Code, or the ANZRC Railway Bridge Design Manual as applicable.
First published as AS 2327.1-1980.
Second edition 1996.
AS 3784.1-1990 | Coatings for fire protection of building elements - Guide to selection and installation of sprayed mineral coatings |
AS 3678-1990 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS 1594-1989 | |
AS 1170.2-1989 | Minimum design loads on structures (known as the SAA Loading Code) Wind loads |
AS 1304-1991 | Welded wire reinforcing fabric for concrete |
AS 1111-1980 | ISO metric hexagon commercial bolts and screws |
AS 1397-1993 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
AS 3679.2-1991 | Structural steel - Welded sections |
AS 3610-1995 | Formwork for concrete |
AS 3679.1-1990 | Structural steel - Hot-rolled bars and sections |
AS 4100-1990 | Steel structures |
AS 1170.3-1990 | Minimum design loads on structures (known as the SAA Loading Code) - Snow loads |
AS 1379-1997 | Specification and supply of concrete |
AS 1365-1986 | Tolerances for flat-rolled steel products |
AS 3610 SUPP 2-1996 | Formwork for concrete - Commentary (Supplement to AS 3610-1995) |
AS 1252-1983 | High strength steel bolts with associated nuts and washers for structural engineering |
AS 1554.2-1993 | Structural steel welding - Stud welding (steel studs to steel) |
AS 1112-1980 | ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts |
AS 1303-1991 | Steel reinforcing wire for concrete |
AS 1530.4-1990 | Methods for fire tests on building materials, components and structures Fire-resistance tests of elements of building construction |
AS 3600-1994 | Concrete structures |
AS 1170.4-1993 | Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads |
AS 1275-1985 | |
AS 1302-1991 | Steel reinforcing bars for concrete |
AS/NZS 1110:1995 | ISO metric precision hexagon bolts and screws |
AS 1554.1-1985 | Structural steel welding (known as the SAA Structural Steel Welding Code) Welding of steel structures |
AS 1170.1-1981 | Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads |
AS 1554.4-1989 | Structural steel welding (known as the SAA Structural Steel Welding Code) - Welding of high strength quenched and tempered steels |
AS 1163-1991 | Structural steel hollow sections |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
AS 3610 SUPP 2-1996 | Formwork for concrete - Commentary (Supplement to AS 3610-1995) |
AS/NZS 1170.0:2002 | Structural design actions General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.