AS 2470-2005
Current
The latest, up-to-date edition.
Steel cylinders for compressed gases - Welded three-piece construction with longitudinal joint - 11 kg to 150 kg (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
29-06-2005
This Standard specifies requirements for welded carbon and stainless steel cylinders with one longitudinal and two circumferential joints, of water capacity not less than 11 kg nor more than 150 kg, which have test pressures from 1750 kPa to 7000 kPa, and are intended for the storage and transport of compressed gases in accordance with AS 2030.1.
Committee |
ME-002
|
DocumentType |
Standard
|
ISBN |
0 7337 6786 9
|
Pages |
27
|
ProductNote |
Reconfirmed 26/08/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand." Reconfirmation Notice 26/08/2016
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard specifies requirements for welded carbon and stainless steel cylinders with one longitudinal and two circumferential joints, of water capacity not less than 11kg nor more than 150kg, which have test pressures from 1750kPa to 7000kPa, and are intended for the storage and transport of compressed gases in accordance with AS2030.1.A gas cylinder manufactured by welding but which includes any brazing of, or on, the pressure-retaining portions is, for the purpose of this Standard, considered to be a brazed gas cylinder.Other Australian Standards for brazed and welded gas cylinders are AS2468, AS2469 and AS3577.AppendixA lists the suggested minimum information that should be supplied by the purchaser when ordering gas cylinders to this Standard.
Originated as part of AS B15-1950.
Previous edition AS 2470-1998.
Fifth edition 2005.
AS 2331.3.7-2004 | Methods of test for metallic and related coatings Corrosion and related property test - Corrodkote (Corr) test (ISO 4541:1978, MOD) (Reconfirmed 2017) |
AS 2205.2.3-2003 | Methods for destructive testing of welds in metal Transverse joggle-butt tensile test |
AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
AS 2473-1996 | Valves for compressed gas cylinders (threaded outlet) |
AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS 2331.3.2-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Acetic acid salt spray test (ASS test) |
AS 2337.1-2004 | Gas cylinder test stations General requirements, inspection and tests - Gas cylinders |
AS 2331.3.6-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Electrographic porosity test |
AS 2331.3.10-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Cracks and pores in chromium |
AS 3577-1999 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
AS 3577-2006 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
AS 3635-1990 | Unified (ISO inch) screw threads, associated gauges, and gauging practice (Reconfirmed 2017) |
AS 2205.3.1-2003 | Methods for destructive testing of welds in metal Transverse guided bend test (Reconfirmed 2018) |
AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
AS 2331.3.5-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Sulfur dioxide/hydrogen sulfide porosity tests |
AS 2331.3.9-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Metallic coatings - Porosity tests - Ferroxyl test |
AS 2812-2005 | Welding, brazing and cutting of metals - Glossary of terms (Reconfirmed 2018) |
AS 2205.2.1-2003 | Methods for destructive testing of welds in metal Transverse butt tensile test |
AS 2331.3.8-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Humidity test - 24 h cycle, damp heat |
AS 2177.1-1994 | Non-destructive testing - Radiography of welded butt joints in metal Methods of test |
AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
AS 1627.4-2002 | Metal finishing - Preparation and pretreatment of surfaces - Abrasive blast cleaning |
AS 2331.3.3-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Copper accelerated acetic acid salt spray test (CASS test) |
AS/NZS 3750.9:1994 | Paints for steel structures - Organic zinc-rich primer |
AS 2331.3.1-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017) |
AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
AS 2038-1977 | Methods for detecting the susceptibility of austenitic stainless steels to intergranular corrosion |
AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
AS 2205.3.4-2003 | Methods for destructive testing of welds in metal Transverse joggle-butt wrap-around bend test |
AS 2331.3.4-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Thioacetamide anti-tarnish and porosity test |
AS 1391-2007 | Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017) |
AS 1210-1997 | Pressure vessels |
AS 1391-1991 | Methods for tensile testing of metals |
AS/NZS 1596:2002 | The storage and handling of LP Gas |
AS 1721-1985 | General purpose metric screw threads (Reconfirmed 2017) |
AS 1722.1-1975 | Pipe threads of Whitworth form Sealing pipe threads (metric units) |
AS/NZS 3750.15:1998 | Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013) |
AS 2030.1-1999 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Cylinders for compressed gases other than acetylene |
AS 2177.2-1982 | Radiography of welded butt joints in metal - Image quality indicators (IQI) and recommendations for their use |
AS 5062:2016 | Fire protection for mobile and transportable equipment |
AS 2809.5-2001 | Road tank vehicles for dangerous goods Tankers for bitumen-based products |
AS 3772-1990 | Fire protection of cooking areas |
AS 3577-2006 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
AS 2030.2-1996 | The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene |
AS 5062-2006 | Fire protection for mobile and transportable equipment |
AS 2527-2006 | Cylinders for dissolved acetylene |
AS 3772-2008 | Pre-engineered fire protection systems for cooking equipment |
AS 2469-2005 | Steel cylinders for compressed gases - Welded two-piece construction - 0.1 kg to 150 kg |
AS 2468-1989 | Steel cylinders for compressed gases - Brazed - 0.1 kg to 11 kg |
AS 2971-2007 | Serially produced pressure vessels (Reconfirmed 2017) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.