AS 3983-1991
Current
The latest, up-to-date edition.
Metal drums for insulated electric cables and bare conductors (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
15-11-1991
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies the requirements for metal drums for the transport and storage of insulated electric cables, bare conductors or other products for which the drums are suitable.
| Committee |
EL-003
|
| DocumentType |
Standard
|
| ISBN |
0 7262 7108 X
|
| Pages |
10
|
| ProductNote |
Reconfirmed 18/11/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 18/11/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for metal drums for the transport and storage of insulated electric cables, bare conductors or other products for which the drums are suitable. Drums manufactured to this Standard shall be suitable for repeated use. The Standard does not cover collapsible drums or drums designed for stacking, except that drums with I-section flanges and not exceeding the standard drum capacity mass stated in Table 1 shall be capable of being stacked two high during storage.The Standard includes nomenclature and dimensions of a preferred range of drums, together with details of materials, construction and marking requirements, and special requirements for the protection of cables.NOTES:1 For the purpose of this Standard, the term 'cable' applies to any product which may be wound on the specified drums.2 Dependent upon cable type, transportation, single use and installation conditions, drums of lighter or more robust construction or differing design may be required. Such drums are not included in the scope of this Standard.3 Timber drums for cables are covered by AS 2857.
First published as AS C365.2-1970.
Revised and redesignated AS 3983-1991.
| AS/NZS 2857:1996 | Timber drums for insulated electric cables and bare conductors |
| AS 1594-1989 | |
| AS/NZS 1595:1998 | Cold-rolled, unalloyed, steel sheet and strip (Reconfirmed 2016) |
| AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 2857-1986 | Timber drums for insulated electric cables and bare conductors |
| AS 3678-1990 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 3679.1-1990 | Structural steel - Hot-rolled bars and sections |
| AS/NZS 1594:2002 | Hot-rolled steel flat products (Reconfirmed 2016) |
| AS 1650-1989 | Hot-dipped galvanized coatings on ferrous articles |
| AS 1544.1-2003 | Methods for impact tests on metals Izod |
| AS 1595-1981 | Cold-rolled unalloyed low carbon steel sheet and strip |
| AS 1554.1-1985 | Structural steel welding (known as the SAA Structural Steel Welding Code) Welding of steel structures |
| AS 1429.1-1993 | Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV |
| AS/NZS 3560.1:2000 | Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2) kV Aluminium conductors (Reconfirmed 2021) |
| AS/NZS 3599.2:1999 | Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV Non-metallic screened |
| AS/NZS 1429.1:2006 | Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV |
| AS 1026-1992 | Electric cables - Impregnated paper insulated - Working voltages up to and including 33 kV |
| AS/NZS 1026:2004 | Electric cables - Impregnated paper insulated - For working voltages up to and including 19/33 (36) kV |
| DR 00391 | Conductors - Covered overhead - For working voltages 6.35/11(12)kV up to and including 19/33(36)kV |
| AS/NZS 3675:2002 | Conductors - Covered overhead - For working voltages 6.35/11 (12) kV up to and including 19/33 (36) kV (Reconfirmed 2017) |
| AS/NZS 1429.2:2009 | Electric cables - Polymeric insulated For working voltages above 19/33 (36) kV up to and including 87/150 (170) kV (Reconfirmed 2020) |
| AS 3675-1993 | Conductors - Covered overhead - For working voltages 6.35/11 kV up to and including 19/33 kV |
| AS/NZS 1429.1:2000 | Electric cables - Polymeric insulated For working voltages 1.9/3.3 (3.6) kV up to and including 19/33 (36) kV |
| AS 1222.2-1992 | Steel conductors and stays - Bare overhead Aluminium clad (SC/AC) (Reconfirmed 2016) |
| AS 1222.1-1992 | Steel conductors and stays - Bare overhead Galvanized (SC/GZ) (Reconfirmed 2016) |
| AS/NZS 3599.1:2003 | Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11 (12) kV and 12.7/22 (24) kV Metallic screened (Reconfirmed 2021) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.