AS/NZS 1573:1995
|
Copper and copper alloys - Wire for engineering purposes (Reconfirmed 2020)
|
AS/NZS 1080.1:1997
|
Timber - Methods of Test Moisture content
|
AS 4040.3-1992
|
Methods of testing sheet roof and wall cladding Resistance to wind pressures for cyclone regions (Reconfirmed 2016)
|
HB 18.44-1991
|
Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products
|
AS/NZS 1866:1997
|
Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020)
|
AS 1604.1-2005
|
Specification for preservative treatment Sawn and round timber
|
AS 1444-1996
|
Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties
|
AS/NZS 2312:2002
|
Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
|
AS 3566.1-2002
|
Self-drilling screws for the building and construction industries General requirements and mechanical properties
|
AS 4046.9-2002
|
Methods of testing roof tiles Determination of dynamic weather resistance (Reconfirmed 2015)
|
AS 1789-2003
|
Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
|
AS 1199.1-2003
|
Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
|
AS 4040.2-1992
|
Methods of testing sheet roof and wall cladding Resistance to wind pressures for non-cyclone regions (Reconfirmed 2016)
|
AS 14443.3-2003
|
Identification cards - Contactless integrated circuit(s) - Proximity cards Initialization and anticollision (Reconfirmed 2016)
|
AS 1397-2001
|
Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
|
AS/NZS 1604.3:2004
|
Specification for preservative treatment Plywood
|
AS 3959-1999
|
Construction of buildings in bushfire-prone areas
|
AS/NZS ISO 9004:2000
|
Quality management systems - Guidelines for performance improvements
|
AS/NZS 4257.6:1994
|
Plastic roof and wall cladding materials - Methods of test Determination of impact resistance (Reconfirmed 2020)
|
AS/NZS 4257.7:1994
|
Plastic roof and wall cladding materials - Methods of test Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure (Reconfirmed 2020)
|
AS 1444-2007
|
Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017)
|
AS 1214-1983
|
Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series)
|
AS/NZS 2728:2007
|
Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
|
AS 2334-1980
|
Steel nails - Metric series (Reconfirmed 2015)
|
AS 1199.0-2003
|
Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
|
AS/NZS 4257.4:1994
|
Plastic roof and wall cladding materials - Methods of test Determination of diffuse light transmission (Reconfirmed 2020)
|
AS 4040.1-1992
|
Methods of testing sheet roof and wall cladding Resistance to concentrated loads (Reconfirmed 2016)
|
AS/NZS ISO 9001:2000
|
Quality management systems - Requirements
|
AS/NZS 1734:1997
|
Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020)
|
AS 1319-1994
|
Safety signs for the occupational environment (Reconfirmed 2018)
|
AS 1288-2006
|
Glass in buildings - Selection and installation
|
AS 1566-1997
|
Copper and copper alloys - Rolled flat products (Reconfirmed 2018)
|
AS/NZS 1604.4:2004
|
Specification for preservative treatment Laminated veneer lumber (LVL)
|
AS 14443.4-2003
|
Identification cards - Contactless integrated circuit(s) cards - Proximity cards Transmission protocol (Reconfirmed 2016)
|
AS 14443.2-2003
|
Identification cards - Contactless integrated circuit(s) cards - Proximity cards Radio frequency power and signal interface (Reconfirmed 2016)
|
AS 14443.1-2003
|
Identification cards - Contactless integrated circuit(s) cards - Proximity cards Physical characteristics (Reconfirmed 2016)
|