Skip to content
Please enter a keyword to search
  • Preview

    AS 1397-2001

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated

    Available format(s):  Hardcopy, PDF 1 User, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  24-06-2021

    Language(s):  English

    Published date:  01-01-2001

    Publisher:  Standards Australia

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies requirements for formable and structural grades of hot-dip zinc-coated and aluminium/zinc-coated steel sheet and strip, up to and including 5.0 mm thick. Includes requirements for differential coatings. Gives information on coating thickness determination, fabricating characteristics and guidelines on the selection of specific grades.

    Scope - (Show below) - (Hide below)

    This Standard specifies requirements for hot-dip zinc-coated or aluminium/zinc-coated steel sheet and strip, supplied in thicknesses up to and including 5.0 mm.This Standard specifies requirements for steel grades, coating classes and surface finish, as follows:(a) Formability grades of steel.(b) Structural grades of steel.(c) Classes of zinc coating, including differential coatings.(d) Classes of zinc coating converted to zinc/iron alloy.(e) Classes of aluminium/zinc alloy coating.(f) Surface finish.NOTES: 1 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.2 Alternative means for determining compliance with this Standard are given in Appendix B.3 The specified requirements apply to the full length and full width of the product supplied, unless otherwise indicated.

    General Product Information - (Show below) - (Hide below)

    Committee MT-001
    Document Type Standard
    Publisher Standards Australia
    Status Superseded
    Superseded By
    Supersedes
    Under Revision

    History - (Show below) - (Hide below)

    First published as part of AS A20-1934.Second edition 1947.Revised and redesignated in part as AS G24-1967.Revised and redesignated as AS 1397-1973.Second edition 1977.Third edition 1984.Fourth edition 1993.Fifth edition 2001. First published as part of AS A20-1934. Second edition 1947. Revised and redesignated in part as AS G24-1967. Revised and redesignated as AS 1397-1973. Second edition 1977. Third edition 1984. Fourth edition 1993. Fifth edition 2001.

    Standards Referenced By This Book - (Show below) - (Hide below)

    AS/NZS 1050.30:1994 Methods for the analysis of iron and steel Determination of boron content - Curcumin spectrophotometric method
    AS/NZS 1050.39:1994 Methods for the analysis of iron and steel Determination of chromium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
    AS/NZS 1050.26:1994 Methods for the analysis of iron and steel Silicon in iron and steel - Spectrophotometric method (Reconfirmed 2016)
    AS/NZS 1050.18:1994 Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016)
    AS/NZS 1050.6:1995 Methods for the analysis of iron and steel Determination of tin content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
    AS 2331.2.3-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings
    AS 2505.1-1981 Methods for bend and related testing of metals Sheet, strip and plate
    AS/NZS ISO 9000:2006 Quality management systems - Fundamentals and vocabulary
    AS 2331.2.3-1980 Methods of test for metallic and related coatings Average thickness tests - Hydrogen evolution method for zinc coatings
    AS/NZS 1050.28:1994 Methods for the analysis of iron and steel Vanadium in steel - Potentiometric method (Reconfirmed 2016)
    AS/NZS 1050.2:1994 Methods for the analysis of iron and steel Determination of carbon content - Gravimetric method (Reconfirmed 2016)
    AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
    AS/NZS 1050.20:1994 Methods for the analysis of iron and steel Determination of magnesium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
    AS/NZS 1050.1:1996 Methods for the analysis of iron and steel Sampling iron and steel for chemical analysis
    AS/NZS 1050.31:1994 Methods for the analysis of iron and steel Determination of niobium content - PAR spectrophotometric method (Reconfirmed 2016)
    AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
    AS 2706-1984 Numerical values - Rounding and interpretation of limiting values
    AS/NZS 1050.32:1994 Methods for the analysis of iron and steel Determination of carbon content - Infrared method (Reconfirmed 2017)
    AS 1391-2007 Metallic materials - Tensile testing at ambient temperature
    AS 2331.2.1-1980 Methods of test for metallic and related coatings - Dissolution methods - Strip and weigh, and analytical Average thickness tests
    AS/NZS 1050.27:1994 Methods for the analysis of iron and steel Determination of titanium content - Spectrophotometric method (Reconfirmed 2016)
    HB 18.28-1991 Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products
    AS/NZS 1050.24:1994 Methods for the analysis of iron and steel Determination of aluminium content - Spectrophotometric method (Reconfirmed 2016)
    AS/NZS 1050.8:1994 Methods for the analysis of iron and steel Determination of manganese content - Spectrophotometric method (Reconfirmed 2016)
    AS/NZS 1050.37:1994 Methods for the analysis of iron and steel Determination of copper content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
    AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
    AS/NZS 1050.14:1994 Methods for the analysis of iron and steel Determination of manganese in iron and steel - Titrimetric method
    AS 1391-1991 Methods for tensile testing of metals
    AS 2505.1-2004 Metallic materials Sheet, strip and plate - Bend tests
    AS 2331.2.1-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical
    AS/NZS ISO 9000:2000 Quality management systems - Fundamentals and vocabulary
    AS/NZS 1365:1996 Tolerances for flat-rolled steel products (Reconfirmed 2016)
    AS/NZS 1050.38:1994 Methods for the analysis of iron and steel Determination of vanadium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
    AS 1199-1988 Sampling procedures and tables for inspection by attributes
    HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
    AS/NZS 1050.16:1994 Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017)
    AS/NZS 1050.21:1994 Methods for the analysis of iron and steel Determination of cobalt content - Spectrophotometric method (Reconfirmed 2016)

    Standards Referencing This Book - (Show below) - (Hide below)

    AS 1684.3-2010 Residential timber-framed construction Cyclonic areas
    AS 1684.4-2010 Residential timber-framed construction Simplified - Non-Cyclonic Areas
    AS 2427-2004 Smoke/heat release vents
    AS/NZS 1554.1:2004 Structural steel welding Welding of steel structures
    AS 1684.2-2010 Residential timber-framed construction Non-cyclonic areas
    AS/NZS 5601.2:2010 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes
    AS 1549-1983 Performance of household electrical appliances - Ranges, built-in cooking tops and wall-mounted ovens
    AS/NZS 2041.6:2010 Buried corrugated metal structures Bolted plate structures
    AS 5601-2004 Gas installations
    AS 1882-2002 Earth and bonding clamps (Reconfirmed 2020) (Reconfirmed 2013)
    AS/NZS 2904:1995 Damp-proof courses and flashings
    AS/NZS 1768:2007 Lightning protection
    AS 5039-2008 Security screen doors and security window grilles
    AS 2047-1999 Windows in buildings - Selection and installation
    AS/NZS 1100.501:2002 Technical drawing Structural engineering drawing (Reconfirmed 2014)
    AS 1682.1-1990 Fire dampers Specification
    AS/NZS 1554.7:2006 Structural steel welding Welding of sheet steel structures
    AS/NZS 4600:2005 Cold-formed steel structures
    AS/NZS 1554.5:2011 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
    AS 2185-1978 Fibrous plaster products
    AS 1798-1992 Lighting poles and bracket arms - Preferred dimensions
    AS/NZS 3500.5:2012 Plumbing and drainage Housing installations
    AS 3730.15-2006 Guide to the properties of paints for buildings Primer - Latex - For metallic zinc surfaces
    AS/NZS 3500.4:2003 Plumbing and drainage Heated water services
    AS 1684.2-2006 Residential timber-framed construction Non-cyclonic areas (SEE IMPORTANT NOTE)
    AS 2050-2002 Installation of roof tiles
    AS 1761-1985 Helical lock-seam corrugated steel pipes
    AS/NZS 2041.1:2011 Buried corrugated metal structures Design methods
    AS 1445-1986 Hot-dipped zinc-coated or aluminium/zinc-coated steel sheet - 76 mm pitch corrugated
    AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
    AS 3566.1-2002 Self-drilling screws for the building and construction industries General requirements and mechanical properties
    AS 3700-2001 Masonry structures
    AS 2552-1982 Steel sheet and strip - Terne (lead-tin alloy) coated
    AS 5039-2003 Security screen doors and security window grilles
    AS 1577-1993 Scaffold planks
    AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
    AS 4322-1995 Quality and performance of commercial electrical appliances - Hot food storage and display equipment
    AS 4773.1-2010 Masonry in small buildings - Design
    ATS 5200.026-2004 Technical Specification for plumbing and drainage products Cold water storage tanks
    AS/NZS 2041.4:2010 Buried corrugated metal structures Helically formed sinusoidal pipes
    AS/NZS 2589:2007 Gypsum linings - Application and finishing
    AS 2327.1-2003 Composite structures Simply supported beams
    AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
    AS 4254-2002 Ductwork for air-handling systems in buildings
    AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
    AS 2143-1978 Industrial and commercial steel shelving
    AS/NZS 1554.5:2004 Structural steel welding Welding of steel structures subject to high levels of fatigue loading
    AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017)
    AS 2662.1-1983 Corrosion inhibition (rust-proofing) - Motor vehicles - Product
    AS/NZS 5601.1:2010 Gas installations General installations
    AS 2273-1979 Steel library shelving
    AS 1743-2001 Road signs - Specifications
    AS 3864-1997 Medical refrigeration equipment - For the storage of blood and blood products
    AS 1562.1-1992 Design and installation of sheet roof and wall cladding Metal (Reconfirmed 2016)
    AS/NZS 1580.104.1:2000 Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
    AS/NZS 3500.1:2003 Plumbing and drainage Water services
    AS/NZS 2179.1:1994 Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners
    AS 4440-2004 Installation of nailplated timber roof trusses
    AS/NZS 2785:2000 Suspended ceilings - Design and installation
    AS 4285-2007 Skylights
    AS 1684.3-2006 Residential timber-framed construction Cyclonic areas
    AS/NZS 2041:1998 Buried corrugated metal structures
    AS/NZS 1768(INT):2003 Lightning protection
    AS 2304-2011 Water storage tanks for fire protection systems
    AS/NZS 1554.1:2011 Structural steel welding Welding of steel structures
    AS 3566.2-2002 Self-drilling screws for the building and construction industries - Corrosion resistance requirements
    AS 1684.4-2006 Residential timber-framed construction - Simplified - Non-cyclonic areas (SEE IMPORTANT NOTE)
    AS 3850-2003 Tilt-up concrete construction
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective