AS 4285:2019
Current
The latest, up-to-date edition.
Rooflights
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
15-05-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.This Standard specifies requirements for the manufacture and testing of rooflights comprising a factory-manufactured assembly to permit natural light transmission.
| Committee |
BD-075
|
| DocumentType |
Standard
|
| ISBN |
978 1 76072 452 8
|
| Pages |
20
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for the manufacture and testing of rooflights comprising a factory-manufactured assembly to permit natural light transmission. The Standard includes requirements for materials, fastenings and hardware, weatherproofing, ventilation, safety labels, marking and maintenance for rooflights complete and ready for installation in a roof opening. It is designed for use by manufacturers, suppliers, designers and consumers.
This Standard applies to factory-manufactured natural lighting systems installed into roofs including skylights, roof windows and tubular skylights (also known as tubular daylighting devices).
This Standard does not apply to overhead roof glazing systems, including barrel vault, atriums, conservatories and roof systems constructed from light-transmitting materials.
NOTE While information on the choice of a rooflight for a particular application is outside the scope of this Standard, some guidance in this respect is provided in Appendix B.
Originated as AS 4285-1995.
Second edition 2007.
Third edition 2019.
| AS 1288-2006 | Glass in buildings - Selection and installation |
| AS 4040.3:2018 | Methods of testing sheet roof and wall cladding Resistance to wind pressures for cyclone regions |
| AS 4040.2-1992 | Methods of testing sheet roof and wall cladding Resistance to wind pressures for non-cyclone regions (Reconfirmed 2016) |
| AS 2334-1980 | Steel nails - Metric series (Reconfirmed 2015) |
| AS 3959:2018 | Construction of buildings in bushfire-prone areas |
| AS 1566-1997 | Copper and copper alloys - Rolled flat products (Reconfirmed 2018) |
| AS/NZS 1573:1995 | Copper and copper alloys - Wire for engineering purposes (Reconfirmed 2020) |
| AS 1562.1:2018 | Design and installation of metal roof and wall cladding Metal |
| AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
| AS 1866:1997 | Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020) |
| AS 3566.1-2002 | Self-drilling screws for the building and construction industries General requirements and mechanical properties |
| AS 1604.1-2012 | Specification for preservative treatment Sawn and round timber |
| AS/NZS 2728:2013 | Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements |
| AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
| AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
| AS/NZS 1604.3:2012 | Specification for preservative treatment Plywood |
| AS/NZS 1170.0:2002 | Structural design actions General principles |
| AS 4040.1-1992 | Methods of testing sheet roof and wall cladding Resistance to concentrated loads (Reconfirmed 2016) |
| EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| AS 4055-2012 | Wind loads for housing |
| AS/NZS 1080.1:2012 | Timber - Methods of test Moisture content |
| AS/NZS 1604.4:2012 | Specification for preservative treatment Laminated veneer lumber (LVL) |
| AS 4046.9-2002 | Methods of testing roof tiles Determination of dynamic weather resistance (Reconfirmed 2015) |
| AS 2047-2014 | Windows and external glazed doors in buildings |
| AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
| AS/NZS 1734:1997 | Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020) |
| AS/NZS 1214:2016 | Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) (ISO 10684:2004, MOD) |
| AS 1720.2-2006 | Timber structures Timber properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.