AS 4647-2011
Current
The latest, up-to-date edition.
Diaphragm gas meters
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
15-02-2011
Provides basic requirements for diaphragm gas meters under tender, to ensure optimum performance, both, when purchased, and after extended service; and to satisfy the requirements of statutory authorities after due consideration is given to variations in accuracies of meter testing. Covers the working environment, materials of construction and performance required of diaphragm meters of Qmax up to 8 m3/h when tested at standard conditions (MSC) on air.
Committee |
AG-008
|
DocumentType |
Standard
|
ISBN |
978 0 7337 9774 3
|
Pages |
35
|
ProductNote |
Reconfirmed 23/02/2018.This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand.ISBN: 978-0-7337-9774-3. Reconfirmation Notice 23/02/2018
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard specifies requirements on the working environment, materials of construction and performance of diaphragm meters of maximum flow rate (Qmax) up to 8 m3/h when tested on air at pressure absorption of 125 Pa. (Meters up to this capacity are generally produced in large quantities.) The design and construction requirements are intended to provide for an expected minimum working life of twenty years.
Originated as AG 702-1976.
Previous edition AS 4647-2005.
Second edition 2011.
AS/NZS 60079.26:2007 | Explosive atmospheres Equipment with equipment protection level (EPL) Ga |
AS/NZS 60079.17:2009 | Explosive atmospheres Electrical installations inspection and maintenance (IEC 60079-17, Ed.4.0 (2007) MOD) |
AS/NZS 60079.29.2:2008 | Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
AS/NZS 60079.25:2004 | Electrical apparatus for explosive gas atmospheres Intrinsically safe systems |
AS 2331.3.11-2004 | Methods of test for metallic and related coatings Corrosion and related property tests - Chemical residue tests |
AS/NZS 60079.14:2009 | Explosive atmospheres Electrical installations design, selection and erection (IEC 60079-14, Ed. 4.0 (2007) MOD) |
AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
AS/NZS 60079.2:2007 | Explosive atmospheres Equipment protection by pressurized enclosure 'p' |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
AS/NZS 60079.28:2007 | Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
AS/NZS 60079.15:2006 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection, n electrical apparatus |
AS/NZS 60079.20:2000 | Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus |
AS 1580.408.4-2004 | Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019) |
AS/NZS 60079.30.2:2007 | Explosive atmospheres Electrical resistance trace heating - Application guide for design, installation and maintenance (IEC 60079-30-2, Ed. 1.0 (2007) MOD) |
AS/NZS 60079.6:2007 | Explosive atmospheres Equipment protection by oil immersion 'o' |
AS/NZS 60079.7:2006 | Explosive atmospheres Equipment protection by increased safety 'e' |
AS/NZS 60079.1:2007 | Explosive atmospheres Equipment protection by flameproof enclosures 'd' |
AS/NZS 60079.12:2000 | Electrical apparatus for explosive gas atmospheres Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents |
AS/NZS 60079.18:2005 | Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection encapsulation m electrical apparatus |
AS 2331.3.1-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017) |
AS 4564-2005 | Specification for general purpose natural gas |
AS/NZS 60079.0:2008 | Explosive atmospheres Equipment - General requirements |
AS/NZS 60079.4:2000 | Electrical apparatus for explosive gas atmospheres Method of test for ignition temperature |
AS/NZS 60079.29.1:2008 | Explosive atmospheres Gas detectors - Performance requirements of detectors for flammable gases |
AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
AS 1834.2-1986 | Material for soldering Flux-cored solders (Reconfirmed 2018) |
AS/NZS 60079.11:2006 | Explosive atmospheres Equipment protection by intrinsic safety 'i' |
AS 2331.3.12-2006 | Methods of test for metallic and related coatings Corrosion and related property tests - Cyclic salt fog/UV exposure of organically coated metal |
AS/NZS 60079.30.1:2007 | Explosive atmospheres Electrical resistance trace heating - General and testing requirements |
AS/NZS 60079.5:2007 | Explosive atmospheres Equipment protection by powdered filling 'q' |
AS/NZS 60079.27:2008 | Explosive atmospheres Fieldbus intrinsically safe concept (FISCO) |
AS/NZS 60079.1.1:2002 | Electrical apparatus for explosive gas atmospheres Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap |
AS 2331.3.13-2006 | Methods of test for metallic and related coatings Corrosion and related property tests - Wet (salt fog)/dry/humidity (Reconfirmed 2017) |
AS/NZS 1580.405.1:1996 | Paints and related materials - Methods of test Determination of pencil hardness of paint film (Reconfirmed 2013) |
AS/NZS 4944:2006 | Gas meters - In-service compliance testing (Reconfirmed 2017) |
AS 2331.3.10-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Cracks and pores in chromium |
AS 4670-2006 | Commercial propane and commercial butane for heating purposes |
AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.