AS/NZS 1826:2008
|
Electrical equipment for explosive gas atmospheres - Special protection - Type of protection ‘s’ |
AS/NZS 60079.29.2:2008
|
Explosive atmospheres Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
AS/NZS 60079.25:2004
|
Electrical apparatus for explosive gas atmospheres Intrinsically safe systems |
AS/NZS 60079.26:2007
|
Explosive atmospheres Equipment with equipment protection level (EPL) Ga |
AS 2832.5-2008
|
Cathodic protection of metals Steel in concrete structures |
AS 1828-1984
|
Electrical equipment for explosive atmospheres - Cable glands |
AS 60034.11-2009
|
Rotating electrical machines Thermal protection |
AS 3011.1-1992
|
Electrical installations - Secondary batteries installed in buildings - Vented cells Vented cells |
AS/NZS 60079.12:2000
|
Electrical apparatus for explosive gas atmospheres Classification of mixtures of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents |
AS 3011.2-1992
|
Electrical installations - Secondary batteries installed in buildings Sealed cells |
AS/NZS 60079.15:2006
|
Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection, n electrical apparatus |
AS/NZS 60079.0:2008
|
Explosive atmospheres Equipment - General requirements |
AS/NZS 60079.2:2007
|
Explosive atmospheres Equipment protection by pressurized enclosure 'p' |
AS/NZS 1768:2007
|
Lightning protection |
AS/NZS 60079.28:2007
|
Explosive atmospheres Protection of equipment and transmission systems using optical radiation |
AS 1482-1985
|
Electrical equipment for explosive atmospheres - Protection by ventilation - Type of protection v (Reconfirmed 2013) |
AS 2380.7-1987
|
Electrical equipment for explosive atmospheres - Explosion-protection techniques - Intrinsic safety i |
AS/NZS 61241.11:2006
|
Electrical apparatus for use in the presence of combustible dust Protection by intrinsic safety iD |
AS 2380.4-1994
|
Electrical equipment for explosive atmospheres - Explosion-protection techniques Pressurized rooms or pressurized enclosures (Reconfirmed 2013) |
AS/NZS 60079.1:2007
|
Explosive atmospheres Equipment protection by flameproof enclosures 'd' |
AS 60034.5-2009
|
Rotating electrical machines Degrees of protection provided by the integral design of rotating electrical machines (IP Code) - Classification |
AS/NZS 60079.6:2007
|
Explosive atmospheres Equipment protection by oil immersion 'o' |
AS 1852.826-1983
|
International electrotechnical vocabulary - Electrical installations of buildings |
AS/NZS 60079.10.1:2009
|
Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
AS/NZS 61241.18:2005
|
Electrical apparatus for use in the presence of combustible dust Protection by encapsulation 'mD' |
AS 1681-2002
|
Safety requirements for electrically heated Type 1 ovens in which flammable volatiles occur (Reconfirmed 2013) |
AS/NZS 4871.2:2002
|
Electrical equipment for coal mines, for use underground Distribution, control and auxiliary equipment |
AS/NZS 60079.1.1:2002
|
Electrical apparatus for explosive gas atmospheres Flameproof enclosures 'd' - Method of test for ascertainment of maximum experimental safe gap |
AS 2832.3-2005
|
Cathodic protection of metals Fixed immersed structures |
AS 60034.1-2009
|
Rotating electrical machines Rating and performance |
AS/NZS 4871.4:2002
|
Electrical equipment for coal mines, for use underground Mains powered electrical mobile machines |
AS/NZS 61241.2.1:2000
|
Electrical apparatus for use in the presence of combustible dust Test methods - Methods for determining the minimum ignition temperature of dust |
AS 2832.4-2006
|
Cathodic protection of metals Internal surfaces (Reconfirmed 2016) |
AS 60529-2004
|
Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
AS/NZS 1972:2006
|
Electric cables - Underground coal mines - Other than reeling and trailing (Reconfirmed 2020) |
AS 2832.1-2004
|
Cathodic protection of metals Pipes and cables |
AS/NZS 4871.6:2007
|
Electrical equipment for coal mines, for use underground Diesel powered machinery and ancillary equipment |
AS 2380.9-1991
|
Electrical equipment for explosive atmospheres - Explosion-protection techniques Type of protection n - Non-sparking |
AS/NZS 60079.7:2006
|
Explosive atmospheres Equipment protection by increased safety 'e' |
AS 1300-1989
|
Electrical equipment for coal mines - Bolted flame-proof cable coupling devices |
AS/NZS 3000:2007
|
Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 2053.2:2001
|
Conduits and fittings for electrical installations Rigid plain conduits and fittings of insulating material (Reconfirmed 2016) |
AS/NZS 3191:2008
|
Electric flexible cords (Reconfirmed 2019) |
AS/NZS 60079.20:2000
|
Electrical apparatus for explosive gas atmospheres Data for flammable gases and vapours, relating to the use of electrical apparatus |
AS/NZS 2229:2004
|
Fuel dispensing equipment for explosive atmospheres |
AS/NZS 2053.1:2001
|
Conduits and fittings for electrical installations General requirements (Reconfirmed 2016) |
AS 2380.2-1991
|
Electrical equipment for explosive atmospheres - Explosion-protection techniques Flameproof enclosure d |
AS 2676.1-1992
|
Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Vented cells |
AS/NZS 4114.1:2003
|
Spray painting booths, designated spray painting areas and paint mixing rooms Design, construction and testing |
AS 2380.6-1988
|
Electrical equipment for explosive atmospheres - Explosion-protection techniques Increased safety |
AS 2676.2-1992
|
Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings - Sealed cells |
AS/NZS 4871.1:2002
|
Electrical equipment for coal mines, for use underground General requirements |
AS/NZS 4871.3:2002
|
Electrical equipment for coal mines, for use underground Substations |
AS/NZS 61241.4:2002
|
Electrical apparatus for use in the presence of combustible dust Type of protection 'pD' |
AS/NZS 2290.1:2005
|
Electrical equipment for coal mines - Introduction and maintenance - For hazardous areas |
AS/NZS 2053.5:2001
|
Conduits and fittings for electrical installations Corrugated conduits and fittings of insulating material (Reconfirmed 2016) |
AS 1931.1-1996
|
High-voltage test techniques - General definitions and test requirements |
AS/NZS 1020:1995
|
The control of undesirable static electricity |
AS/NZS 60079.18:2005
|
Electrical apparatus for explosive gas atmospheres Construction, test and marking of type of protection encapsulation m electrical apparatus |
AS/NZS 3800:2005
|
Electrical equipment for explosive atmospheres - Repair and overhaul |
AS/NZS 2243.8:2006
|
Safety in laboratories - Fume cupboards |
AS 2832.2-2003
|
Cathodic protection of metals Compact buried structures |
AS/NZS 60079.5:2007
|
Explosive atmospheres Equipment protection by powdered filling 'q' |
AS/NZS 1802:2003
|
Electric cables - Reeling and trailing - For underground coal mining purposes |
AS/NZS 60079.27:2008
|
Explosive atmospheres Fieldbus intrinsically safe concept (FISCO) |
AS 60034.17-2009
|
Rotating electrical machines Cage induction motors when fed from converters - Application guide |
AS 60034.12-2009
|
Rotating electrical machines Starting performance of single-speed three-phase cage induction motors |
AS/NZS 4761.1:2008
|
Competencies for working with electrical equipment for hazardous areas (EEHA) Competency Standards |
AS/NZS 4871.5:2002
|
Electrical equipment for coal mines, for use underground Battery powered electrical mobile machines |
AS/NZS 2053.7:2002
|
Conduits and fittings for electrical installations Rigid metal conduits and fittings (Reconfirmed 2016) |
AS/NZS 2053.8:1995
|
Conduits and fittings for electrical installations Flexible conduits and fittings of metal or composite material (Reconfirmed 2016) |
AS 1929-2009
|
Non-destructive testing - Glossary of terms (Reconfirmed 2019) |
AS/NZS 60079.10:2004
|
Electrical apparatus for explosive gas atmospheres Classification of hazardous areas (IEC 60079-10:2002 MOD) |
AS/NZS 61241.1:2005
|
Electrical apparatus for use in the presence of combustible dust Protection by enclosures 'tD' |
AS/NZS 60079.11:2006
|
Explosive atmospheres Equipment protection by intrinsic safety 'i' |
AS/NZS 60079.29.1:2008
|
Explosive atmospheres Gas detectors - Performance requirements of detectors for flammable gases |
AS/NZS 61241.10:2005
|
Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
AS/NZS 4114.2:2003
|
Spray painting booths, designated spray painting areas and paint mixing rooms - Installation and maintenance |