AS 5100.1:2017
Current
The latest, up-to-date edition.
Bridge design Scope and general principles
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
31-03-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.Provides requirements for the design of new bridges and structures such as retaining structures, deflection walls and crash walls, structures built over rail tracks, culverts, structural components related to tunnels, road sign and lighting structures, noise barriers and protection screens.
| Committee |
BD-090
|
| DocumentType |
Standard
|
| ISBN |
978-1-76035-714-6
|
| Pages |
45
|
| ProductNote |
Also numbered as AP-G51.1-17
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out requirements for the design of new bridges and other structures, and provides guidance on the assessment of existing bridges and modification to existing bridges. It covers the following:(a) Bridges:(i) The design of road, rail, light rail, pedestrian and cyclist path bridges.(ii) Assessment of the load capacity of existing bridges.(iii) Strengthening and rehabilitation of existing bridges.(b) Other structures:(i) Road sign and lighting structures, noise barriers and protection screens.(ii) Retaining structures and deflection walls.(iii) Culverts, and structural components related to tunnels, except those covered specifically by other Australian Standards.(iv) Structures built over rail tracks.
First published as HB77.1-1996.
Revised and redesignated as AS5100.1-2004.
Second edition 2017.
| AS 1428.3-1992 | Design for access and mobility Requirements for children and adolescents with physical disabilities |
| AS 1428.2-1992 | Design for access and mobility Enhanced and additional requirements - Buildings and facilities (Reconfirmed 2015) |
| AS 1798:2014 | Lighting poles and bracket arms - Recommended dimensions |
| AS/NZS ISO 14042:2001 | Environmental management - Life cycle assessment - Life cycle impact assessment |
| AS 5100.3:2017 | Bridge design Foundation and soil-supporting structures |
| AS 5100.2:2017 | Bridge design Design loads |
| AS 1428.4-1992 | Design for access and mobility Tactile ground surface indicators for the orientation of people with vision impairment |
| AS 5100.4:2017 | Bridge design Bearings and deck joints |
| AS 5100.5:2017 | Bridge design Concrete |
| AS 5100.7:2017 | Bridge design Bridge assessment |
| AS 1428.5-2010 | Design for access and mobility Communication for people who are deaf or hearing impaired (Reconfirmed 2016) |
| AS 5334-2013 | Climate change adaptation for settlements and infrastructure - A risk based approach |
| AS 1428.1-2009 | Design for access and mobility General requirements for access - New building work |
| AS/NZS 5100.6:2017 | Bridge design Steel and composite construction |
| AS/NZS 3661.2:1994 | Slip resistance of pedestrian surfaces Guide to the reduction of slip hazards |
| AS/NZS ISO 14041:1999 | Environmental management - Life cycle assessment - Goal and scope definition and inventory analysis |
| AS 1742.2-2009 | Manual of uniform traffic control devices Traffic control devices for general use |
| AS/NZS 1170.0:2002 | Structural design actions General principles |
| SA TS 101:2015 | Design of post-installed and cast-in fastenings for use in concrete |
| AS/NZS ISO 14043:2001 | Environmental management - Life cycle assessment - Life cycle interpretation |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS 5100.9:2017 | Bridge design Timber |
| AS 5100.9:2017 | Bridge design Timber |
| AS 5100.7:2017 | Bridge design Bridge assessment |
| AS 3700:2018 | Masonry Structures |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS 5100.5:2017 | Bridge design Concrete |
| AS 1012.14:2018 | Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume |
| AS 5100.3:2017 | Bridge design Foundation and soil-supporting structures |
| AS 5100.2:2017 | Bridge design Design loads |
| AS/NZS 5100.6:2017 | Bridge design Steel and composite construction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.