AS 1012.21-1999
|
Methods of testing concrete Determination of water absorption and apparent volume of permeable voids in hardened concrete (Reconfirmed 2014) |
AS 1012.11-2000
|
Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014) |
AS 1012.20.1:2016
|
Methods of testing concrete Determination of chloride and sulfate in hardened concrete and aggregates - Nitric acid extraction method |
AS 3799-1998
|
Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018) |
AS 3735-2001
|
Concrete structures for retaining liquids |
SA HB 79:2015
|
Alkali Aggregate Reaction - Guidelines on Minimising the Risk of Damage to Concrete Structures in Australia |
AS 5100.2:2017
|
Bridge design Design loads |
AS/NZS 4672.2:2007
|
Steel prestressing materials Testing requirements |
AS 1012.20.2:2016
|
Methods of testing concrete Determination of water-soluble chloride in aggregates and hardened concrete |
AS 1012.1:2014
|
Methods of testing concrete Sampling of concrete |
AS 1012.3.1:2014
|
Methods of testing concrete Determination of properties related to the consistency of concrete - Slump test |
AS 3600-2009
|
Concrete structures |
AS 1012.9:2014
|
Methods of testing concrete Compressive strength tests - Concrete, mortar and grout specimens |
AS 1012.13:2015
|
Methods of testing concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory |
AS 1012.4.1:2014
|
Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in concrete volume with increased air pressure |
AS 1100.501-1985
|
Technical drawing - Structural engineering drawing |
AS 1379-2007
|
Specification and supply of concrete (Reconfirmed 2017) |
AS 1012.12.1-1998
|
Methods of testing concrete Determination of mass per unit volume of hardened concrete - Rapid measuring method (Reconfirmed 2014) |
AS 5100.1:2017
|
Bridge design Scope and general principles |
AS/NZS 1768:2007
|
Lightning protection |
AS 1597.2-2013
|
Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height) |
AS/NZS 1554.6:2012
|
Structural steel welding Welding stainless steels for structural purposes |
AS 3735 SUPP 1-2001
|
Concrete structures for retaining liquids - Commentary (Supplement to |
AS/NZS 4671:2001
|
Steel reinforcing materials |
AS 4672.1:2007
|
Steel prestressing materials General requirements |
AS 1012.10-2000
|
Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014) |
AS 5100.7:2017
|
Bridge design Bridge assessment |
AS/NZS 3500.2:2015
|
Plumbing and drainage Sanitary plumbing and drainage |
AS/NZS 1554.3:2014
|
Structural steel welding Welding of reinforcing steel |
AS/NZS 1170.0:2002
|
Structural design actions General principles |
AS 1012.4.3:2014
|
Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring air volume when concrete is dispersed in water |
AS 1012.2:2014
|
Methods of testing concrete Preparing concrete mixes in the laboratory |
AS 1012.3.5:2015
|
Methods of testing concrete Determination of properties related to the consistency of concrete - Slump flow, T500 and J-ring test |
AS/NZS 3582.1:2016
|
Supplementary cementitious materials Fly ash |
AS 1012.16-1996
|
Methods of testing concrete Determination of creep of concrete cylinders in compression (Reconfirmed 2014) |
AS/NZS 2425:2015
|
Bar chairs in reinforced concrete - Product requirements and test methods |
AS/NZS 3500.4:2015
|
Plumbing and drainage Heated water services |
AS/NZS 3500.3:2015
|
Plumbing and drainage Stormwater drainage |
AS/NZS 3000:2007
|
Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 3582.3:2002
|
Supplementary cementitious materials for use with portland and blended cement Amorphous silica |
AS/NZS 3500.0:2003
|
Plumbing and drainage Glossary of terms |
AS 1199.1-2003
|
Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS 1012.14-1991
|
Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength |
AS 1012.4.2:2014
|
Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in air pressure in chamber above concrete |
AS 3972-2010
|
General purpose and blended cements |
AS/NZS 3582.3:2016
|
Supplementary cementitious materials Amorphous silica |
AS 1478.1-2000
|
Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
AS 1012.12.2-1998
|
Methods of testing concrete Determination of mass per unit volume of hardened concrete - Water displacement method (Reconfirmed 2014) |
AS/NZS 3500.1:2015
|
Plumbing and drainage Water services |
AS 3610.1-2010
|
Formwork for concrete Documentation and surface finish |
AS 1141.60.2:2014
|
Methods for sampling and testing aggregates Potential alkali-silica reactivity - Concrete prism method |
AS 1012.17-1997
|
Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens (Reconfirmed 2014) |