AS 2350.15-1995
|
Methods of testing portland and blended cements Water-soluble chromate content of portland cement (Reconfirmed 2016) |
AS 1199.4-2003
|
Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels (Reconfirmed 2016) |
AS 1379-1997
|
Specification and supply of concrete |
AS 1012.17-1997
|
Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens (Reconfirmed 2014) |
AS/NZS 3000:2000
|
Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS 1012.4.2-1999
|
Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in air pressure in chamber above concrete |
AS 3582.1-1998
|
Supplementary cementitious materials for use with portland and blended cement Fly ash |
AS 1310-1987
|
Steel wire for tendons in prestressed concrete |
AS 2350.12-1995
|
Methods of testing portland and blended cements Preparation of a standard mortar and moulding of specimens |
AS 1199.2-2003
|
Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (Reconfirmed 2016) |
AS/NZS 1554.3:2002
|
Structural steel welding - Welding of reinforcing steel |
AS 3610-1995
|
Formwork for concrete |
AS 3582.2-2001
|
Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace |
AS/NZS 1314:2003
|
Prestressing anchorages (Reconfirmed 2016) |
AS 2350.2-1991
|
Methods of testing portland and blended cements - Chemical composition of portland cement |
AS 1313-1989
|
Steel tendons for prestressed concrete - Cold-worked high-tensile alloy steel bars for prestressed concrete |
AS 2350.13-1995
|
Methods of testing portland and blended cements Determination of drying shrinkage of portland and blended cement mortars |
AS 1012.12.2-1998
|
Methods of testing concrete Determination of mass per unit volume of hardened concrete - Water displacement method (Reconfirmed 2014) |
AS 1012.3.4-1998
|
Methods of testing concrete Determination of properties related to the consistency of concrete - Compactibility index (Reconfirmed 2014) |
AS 1012.10-2000
|
Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014) |
AS 3972-1997
|
Portland and blended cements |
AS 1597.2-1996
|
Precast reinforced concrete box culverts Large culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height) |
AS 1199.0-2003
|
Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
AS 1012.16-1996
|
Methods of testing concrete Determination of creep of concrete cylinders in compression (Reconfirmed 2014) |
AS 1012.20-1992
|
Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates |
AS 2350.10-1991
|
Methods of testing portland and blended cements - Calcium oxide content of blended cement |
HB 18.28-1991
|
Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
AS 2350.9-1997
|
Methods of testing portland and blended cements - Determination of residue on the 45 micrometre sieve |
AS 1012.9-1999
|
Methods of testing concrete Determination of the compressive strength of concrete specimens |
HB 67-1995
|
Concrete practice on building sites |
AS 1012.4.1-1999
|
Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in concrete volume with increased air pressure |
HB 64-2002
|
Guide to concrete construction |
AS 1012.11-2000
|
Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014) |
AS 3799-1998
|
Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018) |
AS 1311-1987
|
Steel tendons for prestressed concrete-7-wire stress-relieved steel strand for tendons in prestressed concrete |
AS 1199.3-2003
|
Sampling procedures for inspection by attributes Skip-lot sampling procedures (Reconfirmed 2016) |
AS 3600-2001
|
Concrete structures |
AS/NZS 4671:2001
|
Steel reinforcing materials |
AS 1012.12.1-1998
|
Methods of testing concrete Determination of mass per unit volume of hardened concrete - Rapid measuring method (Reconfirmed 2014) |
AS/NZS 3582.3:2002
|
Supplementary cementitious materials for use with portland and blended cement Amorphous silica |
AS 2350.7-1997
|
Methods of testing portland and blended cements - Determination of temperature rises during hydration of portland and blended cements |
AS 1199.1-2003
|
Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS 5100.1-2004
|
Bridge design - Scope and general principles |
AS 5100.2-2004
|
Bridge design - Design loads |
AS 5100.4-2004
|
Bridge design Bearings and deck joints |
AS 5100.7-2004
|
Bridge design - Rating of existing bridges |
AS 5100.6-2004
|
Bridge design - Steel and composite construction |
AS 1012.14-1991
|
Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength |
AS 1012.13-1992
|
Methods of testing concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory |
AS 2350.14-1996
|
Methods of testing portland and blended cements - Length change of portland and blended cement mortars exposed to a sulfate solution |
AS/NZS 1768(INT):2003
|
Lightning protection |