AS 5483-2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Minimizing the risk of contamination in products used to collect and analyse biological material for forensic DNA purposes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
31-08-2022
English
18-06-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This Standard specifies provisions for the manufacture of products used in forensic DNA collection and analysis. Products covered by the scope of this Standard include consumables used for evidence collection (including those used in DNA kits), such as swabs, containers and packaging, and also products used in the analysis of DNA samples, such as tubes and other plastic ware, disposable laboratory coats, gloves, masks and other consumables.
| Committee |
CH-041
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 149 9
|
| Pages |
11
|
| ProductNote |
AS 5483-2012 will be withdrawn on 24 February 2020 at which time AS ISO 18385:2017 will be superseding AS 5483-2012.
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies provisions for the manufacture of products used in forensic DNA collection and analysis. Products covered by the scope of this Standard include consumables used for evidence collection (including those used in DNA kits), such as swabs, containers and packaging, and also products used in the analysis of DNA samples, such as tubes and other plastic ware, disposable laboratory coats, gloves, masks and other consumables.This Standard does not cover technical product specifications.WARNING: THIS STANDARD CALLS FOR THE USE OF PROCEDURES THAT MAY BE A HEALTH HAZARD OR CAUSE INJURY IF ADEQUATE PRECAUTIONS ARE NOT TAKEN.The quality guidelines for human DNA testing specified in this Standard are applicable to all other biological testing of products used to collect and analyse biological material for forensic purposes, excluding microbiological testing.This Standard applies to the production specifications for single-use material only and excludes items used in the DNA analysis process post-amplification.
First published as AS 5483-2012.
| AS ISO 13485-2003 | Medical devices - Quality management systems - Requirements for regulatory purposes |
| AS/NZS ISO 14644.4:2002 | Cleanrooms and associated controlled environments Design, construction and start-up (Reconfirmed 2016) |
| AS/NZS 2161.10.2:2005 | Occupational protective gloves Protective gloves against chemicals and micro-organisms - Determination of resistance to penetration |
| AS 2030.2-1996 | The verification, filling, inspection, testing and maintenance of cylinders for the storage and transport of compressed gases Cylinders for dissolved acetylene |
| AS/NZS 2161.1:2000 | Occupational protective gloves Selection, use and maintenance |
| AS/NZS 2161.7.2:2005 | Occupational protective gloves Protection against cuts and stabs by hand knives - Gloves and arm guards made of material other than chainmail (Reconfirmed 2017) |
| AS/NZS 14644.2:2002 | Cleanrooms and associated controlled environments Specifications for testing and monitoring to prove continued compliance with ISO 14644-1 (ISO 14644-2:2000, MOD) |
| AS/NZS ISO 14644.1:2002 | Cleanrooms and associated controlled environments Classification and air cleanliness |
| AS/NZS 2161.10.1:2005 | Occupational protective gloves Protective gloves against chemicals and micro-organisms - Terminology and performance requirements (Reconfirmed 2016) |
| AS/NZS 2161.7.3:2005 | Occupational protective gloves Protection against cuts and stabs by hand knives - Impact cut test for fabric, leather and other materials |
| AS/NZS 14644.3:2009 | Cleanrooms and associated controlled environments Test methods (ISO 14644-3:2005, MOD) |
| AS 2030.1-2009 | Gas cylinders General requirements |
| AS/NZS ISO 14644.7:2006 | Cleanrooms and associated controlled environments Separative devices (clean air hoods, gloveboxes, isolators and minienvironments) (Reconfirmed 2016) |
| AS/NZS 2161.3:2005 | Occupational protective gloves Protection against mechanical risks (Reconfirmed 2016) |
| AS/NZS 4501.1:2008 | Occupational protective clothing Guidelines on the selection, use, care and maintenance of protective clothing (Reconfirmed 2020) |
| AS/NZS 4501.2:2006 | Occupational protective clothing General requirements |
| AS 2030.5-2009 | Gas cylinders Filling, inspection and testing of refillable cylinders |
| AS/NZS 2161.7.1:1998 | Occupational protective gloves Protection against cuts and stabs by hand knives - Chainmail gloves and arm guards (Reconfirmed 2016) |
| AS/NZS 2161.5:1998 | Occupational protective gloves Protection against cold |
| AS 2030.4-1985 | The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases Welded cylinders - Insulated |
| AS/NZS 2161.2:2005 | Occupational protective gloves General requirements |
| AS/NZS 2161.10.3:2005 | Occupational protective gloves Protective gloves against chemicals and micro-organisms - Determination of resistance to permeation by chemicals (Reconfirmed 2016) |
| AS/NZS 2161.4:1999 | Occupational protective gloves Protection against thermal risks (heat and fire) (Reconfirmed 2016) |
| AS/NZS ISO 31000:2009 | Risk management - Principles and guidelines |
| AS/NZS 2161.9:2002 | Occupational protective gloves Method of measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
| AS/NZS 2161.8:2002 | Occupational protective gloves Protection against ionizing radiation and radioactive contamination (Reconfirmed 2016) |
| AS/NZS ISO 14644.5:2006 | Cleanrooms and associated controlled environments Operations (Reconfirmed 2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.