AS/NZS 1050.16:1994
Current
The latest, up-to-date edition.
Methods for the analysis of iron and steel Determination of sulfur content - Infrared absorption method after combustion in an induction furnace (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
08-08-1994
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies an infrared absorption method after combustion of the test portion at high temperature in a current of pure oxygen using a high frequency induction furnace. The method can be used for the determination of sulfur content between 0.002 percent and 0.10 percent in steel. This Standard is identical with and reproduced from ISO4935:1989.
| Committee |
CH-010
|
| DocumentType |
Standard
|
| ISBN |
0 7262 8901 9
|
| Pages |
7
|
| ProductNote |
Reconfirmed 20/01/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 20/01/2017
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
This International Standard specifies an infrared absorption method after combustion in an induction furnace for the determination of sulfur content in steel and iron.
| Standards | Relationship |
| ISO 4935:1989 | Identical |
First published as Joint Standard AS/NZS 1050.16:1994.
| AS 2166-1995 | One-mark pipettes |
| AS 2165-1996 | Laboratory glassware - Burettes |
| AS 2164-1995 | Laboratory glassware - One-mark volumetric flasks |
| AS 2850-1986 | Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct |
| AS 1213-1982 | Iron and steel - Methods of sampling |
| AS/NZS 4671:2001 | Steel reinforcing materials |
| AS 1085.10-2002 | Railway track material Rail anchors (Reconfirmed 2013) |
| AS 2556-2000 | Electric resistance welded steel air heater tubes |
| AS 3600-2001 | Concrete structures |
| AS 1447-2007 | Hot-rolled spring steels (Reconfirmed 2017) |
| AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
| AS 3751-2005 | Underground mining - Slope haulage - Couplings, drawbars, and safety chains |
| AS 1085.2-2002 | Railway track material Fishplates (Reconfirmed 2013) |
| AS 1472-2003 | Carbon steel spring wire for mechanical springs |
| AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
| AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS/NZS 1163:2009 | Cold-formed structural steel hollow sections |
| AS 2266-2002 | Carbon steel spring wire for bedding and seating |
| AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
| AS 1858.1-2003 | Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels |
| AS 1450-2007 | Steel tubes for mechanical purposes (Reconfirmed 2017) |
| AS/NZS 3679.1:2010 | Structural steel Hot-rolled bars and sections |
| AS 4738.1-2007 | Metal castings Ferrous sand moulded |
| AS 1448-2007 | Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum) |
| AS 1085.8-2002 | Railway track material Dogspikes (Reconfirmed 2013) |
| AS 1548-2008 | Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018) |
| AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.