AS/NZS 1050.18:1994
Current
The latest, up-to-date edition.
Methods for the analysis of iron and steel Determination of phosphorus - Spectrophotometric method (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
15-08-1994
Specifies a spectrophotometric method for the determination of the phosphorus content of iron and steel. The method is applicable to the determination of phosphorus contents between 0.005 percent and 2.0 percent, provided that the following elements are not present in amounts greater than that specified: niobium 1 percent, tantalum 1 percent, titanium 2 percent, tungsten 11 percent, zirconium 1 percent.
Committee |
CH/10
|
DocumentType |
Standard
|
ISBN |
0 7262 9089 0
|
Pages |
7
|
ProductNote |
Reconfirmed 16/12/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 16/12/2016
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard sets out a spectrophotometric method for the determination of the phosphorus content of iron and steel. The method is applicable to the determination of phosphorus contents between 0.005% and 2.0%, provided that the following elements are not present in amounts greater than that specified: niobium 1% tantalum 1% titanium 2% tungsten 11% zirconium 1%
First published as part of AS K1-1925.
Second edition 1926.
Revised and redesignated in part as AS K1.3-1951 and AS K1.4-1951.
AS K1.3-1951 and AS K1.4-1951 revised, amalgamated and redesignated AS K1.18-1963.
Revised and redesignated AS 1050.18-1984.
Jointly revised and designated as Joint Standard AS/NZS 1050.18:1994.
AS 3753-2001 | Recommended practice for chemical analysis by ultraviolet/visible spectrophotometry |
AS 1213-1982 | Iron and steel - Methods of sampling |
AS 2167-2005 | Graduated straight pipettes |
AS 3753-1990 | Recommended practice for chemical analysis by ultraviolet/visible spectrophotometry |
AS 2166-1995 | One-mark pipettes |
AS 2166-2002 | Laboratory glassware - One-mark pipettes |
AS 2167-1996 | Graduated straight pipettes |
AS 2162-1979 | Code of practice for the use of volumetric glassware |
AS 2164-2003 | Laboratory glassware - One-mark volumetric flasks |
AS 2850-1986 | Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct |
AS 2164-1995 | Laboratory glassware - One-mark volumetric flasks |
AS/NZS 4671:2001 | Steel reinforcing materials |
AS 1085.10-2002 | Railway track material Rail anchors |
AS 2556-2000 | Electric resistance welded steel air heater tubes |
AS 3600-2001 | Concrete structures |
AS 1447-2007 | Hot-rolled spring steels (Reconfirmed 2017) |
AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
AS 3751-2005 | Underground mining - Slope haulage - Couplings, drawbars, and safety chains |
AS 1085.2-2002 | Railway track material Fishplates |
AS 1472-2003 | Carbon steel spring wire for mechanical springs |
AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
AS 2875-1995 | Alloy steel cylinders for compressed gases - Seamless - 0.1 kg to 500 kg |
AS/NZS 1163:2009 | Cold-formed structural steel hollow sections |
AS 2266-2002 | Carbon steel spring wire for bedding and seating |
AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
AS 1858.1-2003 | Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels |
AS 1450-2007 | Steel tubes for mechanical purposes (Reconfirmed 2017) |
AS/NZS 3679.1:2010 | Structural steel Hot-rolled bars and sections |
AS 4738.1-2007 | Metal castings Ferrous sand moulded |
AS 1448-2007 | Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum) |
AS 1085.8-2002 | Railway track material Dogspikes (Reconfirmed 2013) |
AS 1548-2008 | Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018) |
AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.