AS/NZS 1050.27:1994
Current
The latest, up-to-date edition.
Methods for the analysis of iron and steel Determination of titanium content - Spectrophotometric method (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
19-09-1994
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies a spectrophotometric method using diantipyrylmethane as a chromogen, measured spectrophotometrically at 390nm. The method can be used for the determination of titanium content between 0.005 percent and 1.20 percent in steel.
| Committee |
CH-010
|
| DocumentType |
Standard
|
| ISBN |
0 7262 9009 2
|
| Pages |
7
|
| ProductNote |
Reconfirmed 16/12/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 16/12/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out a spectrophotometric method for the determination of titanium in iron and steel. This method is applicable to the determination of titanium in all types of iron and steel containing between 0.005% and 1.20% titanium.
First published as AS 1050.27-1971.
Second edition 1984.
Jointly revised and designated as Joint Standard AS/NZS 1050.27:1994.
| AS 2164-1995 | Laboratory glassware - One-mark volumetric flasks |
| AS 2166-2002 | Laboratory glassware - One-mark pipettes |
| AS 2166-1995 | One-mark pipettes |
| AS 1213-1982 | Iron and steel - Methods of sampling |
| AS 3753-2001 | Recommended practice for chemical analysis by ultraviolet/visible spectrophotometry |
| AS 2164-2003 | Laboratory glassware - One-mark volumetric flasks |
| AS 2162-1979 | Code of practice for the use of volumetric glassware |
| AS 2167-1996 | Graduated straight pipettes |
| AS 2167-2005 | Graduated straight pipettes |
| AS 3753-1990 | Recommended practice for chemical analysis by ultraviolet/visible spectrophotometry |
| AS 2850-1986 | Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct |
| AS/NZS 4671:2001 | Steel reinforcing materials |
| AS 1085.10-2002 | Railway track material Rail anchors |
| AS 2556-2000 | Electric resistance welded steel air heater tubes |
| AS 3600-2001 | Concrete structures |
| AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
| AS 3751-2005 | Underground mining - Slope haulage - Couplings, drawbars, and safety chains |
| AS 1085.2-2002 | Railway track material Fishplates |
| AS 1472-2003 | Carbon steel spring wire for mechanical springs |
| AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
| AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS 2266-2002 | Carbon steel spring wire for bedding and seating |
| AS 1858.1-2003 | Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels |
| AS 1085.8-2002 | Railway track material Dogspikes (Reconfirmed 2013) |
| AS 1548-2008 | Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018) |
| AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.