AS/NZS 1050.39:1994
Current
The latest, up-to-date edition.
Methods for the analysis of iron and steel Determination of chromium content - Flame atomic absorption spectrometric method (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
08-08-1994
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies a flame atomic absorption spectrometric method for the determination of chromium content between 0.002 percent and 2.0 percent in non-alloy and low alloy steel. The procedure involves dissolution of a test portion in acid and determination of the atomic absorption of the chromium spectral line, measured at either 357.9 nm or 425.4 nm in a flame atomic absorption spectrometer. This Standard is identical with and reproduced from ISO 10138:1991.
| Committee |
CH/10
|
| DocumentType |
Standard
|
| ISBN |
0 7262 8900 0
|
| Pages |
10
|
| ProductNote |
Reconfirmed 16/12/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 16/12/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
This International Standard specifies a flame atomic absorption spectrometric method for the determination of chromium in non-alloy and low-alloy steels and iron.The method is applicable to chromium contents between 0,002 % (m/m) and 2,0 % (m/m).
| Standards | Relationship |
| ISO 10138:1991 | Identical |
First published as Joint Standard AS/NZS 1050.39:1994.
| AS 2166-2002 | Laboratory glassware - One-mark pipettes |
| AS 1213-1982 | Iron and steel - Methods of sampling |
| AS 2165-1996 | Laboratory glassware - Burettes |
| AS 2850-1986 | Chemical analysis - Interlaboratory test programs - For determining precision of analytical method(s) - Guide to the planning and conduct |
| AS 2164-1995 | Laboratory glassware - One-mark volumetric flasks |
| AS 2166-1995 | One-mark pipettes |
| AS 2164-2003 | Laboratory glassware - One-mark volumetric flasks |
| AS/NZS 4671:2001 | Steel reinforcing materials |
| AS 1085.10-2002 | Railway track material Rail anchors |
| AS 2556-2000 | Electric resistance welded steel air heater tubes |
| AS 3600-2001 | Concrete structures |
| AS 4728-2005 | Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016) |
| AS 3751-2005 | Underground mining - Slope haulage - Couplings, drawbars, and safety chains |
| AS 1085.2-2002 | Railway track material Fishplates |
| AS 1472-2003 | Carbon steel spring wire for mechanical springs |
| AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
| AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS 2266-2002 | Carbon steel spring wire for bedding and seating |
| AS 1858.1-2003 | Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels |
| AS 1085.8-2002 | Railway track material Dogspikes (Reconfirmed 2013) |
| AS 1548-2008 | Fine grained, weldable steel plates for pressure equipment (Reconfirmed 2018) |
| AS 1397-2001 | Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.