AS/NZS 1260:2017
Current
The latest, up-to-date edition.
PVC-U pipes and fittings for drain, waste and vent applications
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
09-05-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies requirements for PVC-U pipes and fittings for sewer, drain, waste and vent applications above ground or below ground and is intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. Includes requirements for both plain and structured wall pipes and fittings.
| Committee |
PL-021
|
| DocumentType |
Standard
|
| ISBN |
978 1 76035 758 0
|
| Pages |
53
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for PVC-U pipes and fittings for sewer, drain, waste and vent applications above ground or below ground and is intended to be used where the pipeline is operating under gravity flow and the operating pressure is low. The Standard includes requirements for both plain and structured wall pipes and fittings.NOTE: Requirements for the installation and use of pipes manufactured to this Standard are set out in AS/NZS 2032, AS/NZS 2566.1, AS/NZS 2566.2, AS/NZS 3500.2, AS/NZS 3500.5, WSA 02 and WSA 06.Appendix C sets out additional requirements for pipes and fittings classed as best environmental practice PVC for drain, waste and vent applications.
Originated in Australia as part of AS K138-1963 and AS A160-1969.
Originated in New Zealand in part as NZS7641:1978, NZS7642:1971 and NZS7649:1988.
Previous edition AS/NZS1260:2009.
Fifth edition 2017.
Reissued incorporating Amendment No 1 (June 2024).
| AS/NZS 2566.2:2002 | Buried flexible pipelines Installation (Reconfirmed 2016) |
| AS/NZS ISO 14001:2016 | Environmental management systems - Requirements with guidance for use |
| AS/NZS 1462.8:2008 | Methods of test for plastics pipes and fittings Method of testing the leaktightness of assemblies (Reconfirmed 2017) |
| AS/NZS 1477:2006 | PVC pipes and fittings for pressure applications |
| AS ISO/IEC 17050.2-2005 | Conformity assessment - Supplier’s declaration of conformity Supporting documentation (Reconfirmed 2016) |
| AS/NZS 1462.11:1996 | Methods of test for PVC pipes and fittings Method for high temperature stress-relief testing of fittings (Reconfirmed 2017) |
| AS/NZS 2566.1:1998 | Buried flexible pipelines Structural design |
| AS 2887-1993 | Plastic waste fittings |
| AS 1172.1:2014 | Sanitary plumbing products Water closet pans |
| AS 681.1-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber |
| AS/NZS 4765:2007 | Modified PVC (PVC-M) pipes for pressure applications |
| AS/NZS 1462.13:2006 | Methods of test for plastics pipes and fittings Method for the determination of elastomeric seal joint contact width and pressure (Reconfirmed 2017) |
| AS ISO/IEC 17050.1-2005 | Conformity assessment - Supplier’s declaration of conformity General requirements (Reconfirmed 2016) |
| AS/NZS 1462.22:1997 | Methods of test for plastics pipes and fittings Method for determination of pipe stiffness |
| AS/NZS 1462.1:2006 | Methods of test for plastics pipes and fittings Method for determining the dimensions of pipes and fittings (Reconfirmed 2024) |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS/NZS 1462.15:1996 | Methods of test for PVC pipes and fittings Method for determination of vinyl chloride monomer content (Reconfirmed 2017) |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS/NZS 1462.23:1997 | Methods of test for plastics pipes and fittings - Method for determination of ring flexibility |
| AS/NZS 1462.3:1998 | Methods of test for plastics pipes and fittings Method for determining the impact characteristics of pipes (Reconfirmed 2017) |
| AS/NZS 3500.2:2015 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 1462.5:2002 | Methods of test for plastics pipes and fittings Vicat softening temperature (Reconfirmed 2017) |
| AS 2700-2011 | Colour standards for general purposes (Reconfirmed 2022) |
| AS/NZS 1462.2:2006 | Methods of test for plastics pipes and fittings Method for determining the flattening properties of plastics pipes and fittings |
| AS/NZS 1462.16:2006 | Methods of test for plastics pipes and fittings Method for high temperature testing of pipe (Reconfirmed 2017) |
| AS/NZS 1462.4:2002 | Methods of test for plastics pipes and fittings Method for determining reversion of plastics pipes (Reconfirmed 2017) |
| AS/NZS 2032:2006 | Installation of PVC pipe systems (Reconfirmed 2024) |
| AS/NZS 3879:2011 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
| AS 681.2-2008 | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers |
| AS/NZS 1462.21:1997 | Methods of test for plastics pipes and fittings Method for determination of bond strength (Reconfirmed 2017) |
| AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
| AS 4809:2017 | Copper pipe and fittings - Installation and commissioning |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.