AS/NZS 1577:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Scaffold decking components
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
08-07-2024
English
01-01-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.Sets out requirements for the design, manufacture and proper implementation of scaffold decking components.
| Committee |
BD-036
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 629
|
| Pages |
36
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for the design, manufacture and performance of scaffold decking components and their performance requirements when used to form working platforms for scaffolds. Decking components comprise scaffold planks, filler units, lap plates and prefabricated platforms.NOTES: 1 Means for demonstrating compliance with this Standard are given in Appendix F.2 Information on timber species suitable for timber scaffold planks is given in Appendix G.
First published in part as AS 1577 1974.
AS 1578 first published 1974.
AS 1577 1974 and AS 1578 1974 revised, amalgamated and designated as AS 1577 1993.
AS 1577 1993 revised and redesignated AS/NZS 1577:2013.
| AS 14443.4-2003 | Identification cards - Contactless integrated circuit(s) cards - Proximity cards Transmission protocol (Reconfirmed 2016) |
| AS/NZS 2098.1:2006 | Methods of test for veneer and plywood Moisture content of veneer and plywood |
| AS 14443.2-2003 | Identification cards - Contactless integrated circuit(s) cards - Proximity cards Radio frequency power and signal interface (Reconfirmed 2016) |
| AS/NZS 1748.2:2011 | Timber - Solid - Stress-graded for structural purposes Qualification of grading method |
| AS 1866:1997 | Aluminium and aluminium alloys - Extruded rod, bar, solid and hollow shapes (Reconfirmed 2020) |
| AS/NZS ISO 9001:2008 | Quality management systems - Requirements |
| AS/NZS 4600:2005 | Cold-formed steel structures |
| HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
| AS/NZS 3679.1:2010 | Structural steel Hot-rolled bars and sections |
| AS 1874-2000 | Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018) |
| AS/NZS 1665:2004 | Welding of aluminium structures (Reconfirmed 2016) |
| AS/NZS 1754:2013 | Child restraint systems for use in motor vehicles |
| AS 1604.1-2012 | Specification for preservative treatment Sawn and round timber |
| AS 1199.0-2003 | Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016) |
| AS/NZS 4600 SUPP 1:1998 | Cold-formed steel structures - Commentary (Supplement to AS/NZS 4600:1996) |
| AS/NZS ISO 9004:2011 | Managing for the sustained success of an organization - A quality management approach |
| AS/NZS 4491:1997 | Timber - Glossary of terms in timber-related Standards (Reconfirmed 2016) |
| AS/NZS 2098.11:2005 | Methods of test for veneer and plywood Determination of formaldehyde emissions for plywood |
| AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
| AS/NZS 4357.0:2005 | Structural laminated veneer lumber Specifications (Reconfirmed 2016) |
| AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
| AS/NZS 1664.2:1997 | Aluminium structures Allowable stress design (Reconfirmed 2020) |
| AS 4100-1998 | Steel structures (Reconfirmed 2016) |
| AS/NZS 2878:2000 | Timber - Classification into strength groups |
| AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
| AS 14443.3-2003 | Identification cards - Contactless integrated circuit(s) - Proximity cards Initialization and anticollision (Reconfirmed 2016) |
| AS/NZS 3678:2011 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 4100 SUPP 1-1999 | Steel structures - Commentary (Supplement to AS 4100-1998) |
| AS 14443.1-2003 | Identification cards - Contactless integrated circuit(s) cards - Proximity cards Physical characteristics (Reconfirmed 2016) |
| AS/NZS 1748.1:2011 | Timber - Solid - Stress-graded for structural purposes General requirements |
| AS/NZS 4994.4:2018 | Temporary edge protection Perimeter Protection Screens |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.