AS/NZS 1859.1:1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Reconstituted wood-based panels Particleboard
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
05-02-1997
This Standard specifies dimensional tolerances and physical and mechanical properties for mat-formed particleboard, which is classified into standard, high moisture resistant, flooring and treated particleboards. Appendices provide information on methods of compliance, purchasing guidelines, storage and handling, size or pack quantity combinations, and selection and application of screw fasteners.
Committee |
TM-005
|
DocumentType |
Standard
|
ISBN |
0 7337 0900 1
|
Pages |
23
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This Standard specifies tolerances on dimensions, and physical and mechanical properties for mat-formed particleboard. This Standard does not apply to particleboard manufactured by the extrusion process.NOTES:1 Alternative methods for demonstrating compliance with this Standard are given in Appendix A.2 Appendix B contains information that should be supplied by the purchaser at the time of inquiry or order.3 Appendix C describes recommended practices for the handling and storage of particleboard.4 Appendix D provides information on preferred sheet dimensions and pack quantities.5 Appendix E describes recommended practices for selection and application of screw fasteners.Particleboard shall comply with Section 2 and with the following Sections, as applicable to type:(a) Standard particleboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 3.(b) High moisture resistant (HMR) particleboard . . . . . . . . . . . . . . . . .Section 4.(c) Particleboard flooring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 5.(d) Treated products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section 6.
First published in Australia as part of AS O115-1968.
Revised and redesignated AS 1859-1976.
Second edition 1980.
First published in New Zealand in part as NZS/BS 1142.1:1971.
NZS/BS 1142.2 first published 1971.
NZS/BS 1142.3 first published 1972.
NZS/BS 1142.1:1971, NZS/BS 1142.2:1971 and NZS/BZS 1142.3:1972 revised, amalgamated and redeisgnated NZS/BS 1142:1989.
AS 1859-1980 and NZS/BS 1142:1989 jointly revised and redesignated in part as Joint Standard AS/NZS 1859.1(Int):1995.
Revised and designated AS/NZS 1859.1:1997.
AS/NZS 4266.17:1995 | Reconstituted wood-based panels - Methods of test Determination of efficacy of termiticide treatment |
AS/NZS 4266.3:1995 | Reconstituted wood-based panels - Methods of test Determination of moisture content |
AS/NZS 4266.4:1995 | Reconstituted wood-based panels - Methods of test Determination of density |
AS/NZS ISO 9000.1:1994 | Quality management and quality assurance standards Guidelines for selection and use |
AS/NZS 4266.12:1995 | Reconstituted wood-based panels - Methods of test Determination of surface water absorption |
AS/NZS 4266.9:1995 | Reconstituted wood-based panels - Methods of test Determination of thickness stability and glue bond quality |
AS/NZS 4266.7:1995 | Reconstituted wood-based panels - Methods of test Determination of surface soundness |
AS/NZS ISO 8402:1994 | Quality management and quality assurance - Vocabulary |
AS/NZS 4266.2:1995 | Reconstituted wood-based panels - Methods of test Determination of dimensions |
AS/NZS 4266.16:1995 | Reconstituted wood-based panels - Methods of test Determination of formaldehyde (FIRA chamber method) |
AS/NZS 4266.15:1995 | Reconstituted wood-based panels - Methods of test Determination of formaldehyde (perforator method) |
AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
AS/NZS 4266.8:1995 | Reconstituted wood-based panels - Methods of test Determination of thickness swell |
AS 1860-1998 | Installation of particleboard flooring |
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
AS 1530.3-1989 | Methods for fire tests on building materials, components and structures Simultaneous determination of ignitability, flame propagation, heat release and smoke release |
AS/NZS ISO 9004.1:1994 | Quality management and quality system elements Guidelines |
AS/NZS 4266.18:1995 | Reconstituted wood-based panels - Methods of test Determination of efficacy of fungicide treatment |
AS/NZS 4266.5:1995 | Reconstituted wood-based panels - Methods of test Determination of bending strength (MOR) and stiffness (MOE) |
AS 1728-1975 | Types of timber surfaces |
AS/NZS 4266.13:1995 | Reconstituted wood-based panels - Methods of test Determination of screw holding strength |
AS/NZS 4266.1:1996 | Reconstituted wood-based panels - Methods of test Sampling, cutting and conditioning for tests |
AS/NZS 4266.6:1995 | Reconstituted wood-based panels - Methods of test Determination of internal bond strength |
AS/NZS 1604.2:2004 | Specification for preservative treatment Reconstituted wood-based products |
HB 52-2000 | The Bathroom Book |
AS 1860-1998 | Installation of particleboard flooring |
HB 52-2000 | The Bathroom Book |
AS 4260-1997 | High efficiency particulate air (HEPA) filters - Classification, construction and performance (Reconfirmed 2018) |
AS/NZS 1604.2:2002 | Specification for preservative treatment - Reconstituted wood-based products |
AS 6001-1999 | Working platforms for housing construction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.