AS/NZS 2032:2006
Current
The latest, up-to-date edition.
Installation of PVC pipe systems (Reconfirmed 2024)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
18-04-2006
Important note : Users cannot be edited or removed once added to your Multi user PDF.Proposes methods for handling, storage, installation, testing and commissioning of polyvinyl chloride (PVC) pipelines, above or below ground, for pressure and non-pressure applications conveying liquids.
| Committee |
PL-021
|
| DocumentType |
Standard
|
| ISBN |
0 7337 7378 8
|
| Pages |
34
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out methods for handling, storage, installation, testing and commissioning of polyvinyl chloride (PVC) pipelines, above- or below-ground, for pressure and non-pressure applications conveying liquids. PVC materials covered are - (a) PVC-U (unplasticized polyvinyl chloride);(b) PVC-M (modified polyvinyl chloride);(c) PVC-O (oriented polyvinyl chloride); and(d) PVC-C (chlorinated polyvinyl chloride).This Standard applies to PVC pipelines that carry liquids under either pressure or gravity flow situations and the components of which comply with, but are not limited to, the following:(a) AS/NZS 1254 - Stormwater.(b) AS/NZS 1260 - Drain, waste and vent.(c) AS 1273 - Rainwater downpipes.(d) AS/NZS 1477 - PVC-U pressure applications.(e) AS 4441(Int) - PVC-O pressure applications;(f) AS/NZS 4765 - PVC-M pressure applications.(g) ASTM F441 - PVC-C Schedules 40 and 80.
First published as AS CA67-1972.
Revised and reissued as AS 2032-1977.
AS 2032-1977 revised and designated AS/NZS 2032:2006.
Reissued incorporating Amendment No. 1 (October 2008).
| AS 1646.2-2000 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation |
| AS/NZS 1477:1999 | PVC pipes and fittings for pressure applications |
| AS 4441(INT)-2003 | Oriented PVC (PVC-O) pipes for pressure applications |
| AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
| AS/NZS 2566.2:2002 | Buried flexible pipelines Installation (Reconfirmed 2016) |
| AS/NZS 4765(INT):2000 | Modified PVC (PVC-M) pipes for pressure applications |
| AS 1646.4-2005 | Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Thermoplastic elastomers and vulcanizates |
| AS/NZS 2648.1:1995 | Underground marking tape Non-detectable tape (Reconfirmed 2020) |
| AS/NZS 1254:2002 | PVC pipes and fittings for storm and surface water applications |
| AS 1273-1991 | Unplasticized PVC (UPVC) downpipe and fittings for rainwater (Reconfirmed 2018) |
| AS/NZS 3879:1995 | Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
| AS 1646.3-2000 | Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds |
| AS/NZS 4327:1995 | Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020) |
| AS/NZS 1477:2017 | PVC pipes and fittings for pressure applications |
| AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 1254:2010 | PVC-U pipes and fittings for stormwater and surface water applications (Reconfirmed 2024) |
| AS/NZS 4645.3:2008 | Gas distribution networks Plastics pipe systems |
| AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
| ATS 5200.055-2008 | Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications |
| AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
| AS/NZS 3879:2006 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings |
| AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
| AS/NZS 4765:2007 | Modified PVC (PVC-M) pipes for pressure applications |
| AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
| AS/NZS 1260:2017 | PVC-U pipes and fittings for drain, waste and vent applications |
| AS/NZS 1477:2006 | PVC pipes and fittings for pressure applications |
| AS/NZS 4645.3:2018 | Gas distribution networks Plastics pipe systems |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3084:2017 | Telecommunications installations - Telecommunications pathways and spaces for commercial buildings |
| AS/NZS 4765:2017 | Modified PVC (PVC-M) pipes for pressure applications |
| AS/NZS 2280:2014 | Ductile iron pipes and fittings |
| AS/NZS 2280:2020 | Ductile iron pipes and fittings |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.