AS/NZS 2947.4:1999
Current
The latest, up-to-date edition.
Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator strings and insulator sets
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
05-03-1999
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies procedures for electrical and mechanical tests on insulators of ceramic material or glass for use on a.c. overhead power and traction lines with a nominal voltage greater than 100 Hz. This Standard applies to insulator strings and sets. This Standard is identical with and has been reproduced from IEC 60383-2:1993.
| Committee |
EL-010
|
| DocumentType |
Standard
|
| ISBN |
0 7337 2524 4
|
| Pages |
9
|
| ProductNote |
Reconfirmed 10/06/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 10/06/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This part of IEC 383 applies to insulator strings and insulator sets comprising string insulator units of ceramic material or glass for use on a.c. overhead power lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. This part of IEC 383 also applies to insulator strings and insulator sets for use on d.c. overhead electric traction lines. This part of IEC 383 also applies to insulator strings and insulator sets of similar design when used in substations. It may be regarded as a provisional standard for insulator strings and insulator sets for use on d.c. overhead power lines and for composite insulator sets. The object of this part of IEC 383 is to prescribe standard electrical test procedures and acceptance criteria to verify the defined characteristics of insulator strings and insulator sets falling within the scope of the part of IEC 383. These tests and characteristics are intended to give a common base to designers, users and suppliers of overhead lines, insulators and line equipment when definition, evaluation or verification of the electrical characteristics of such equipment is required.These tests are not intended to be mandatory tests on insulators whether supplied individually or as strings or as sets.NOTES1 Tests on string insulator units are dealt with in IEC 383-1. Tests on composite insulators are dealt with in IEC 1109.2 This part does not include artificial pollution or radio-interference tests. These subjects and relevant test methods are dealt with in the following IEC reports:IEC 437: Report û radio interference test on high-voltage insulators.IEC 507: Report û artificial pollution tests on high-voltage insulators to be used on a.c. systems.3 Power arc tests are currently under study.
| Standards | Relationship |
| IEC 60383-2:1993 | Identical |
First published as part of AS C67-1939.
AS C67 Supplement 1 first published 1947.
AS C67-1939 and AS C67 Supplement 1-1947 revised, amalgamated and designated AS C67-1963.
Revised and redesignated in part as AS 1137.1-1972.
Second edition 1981.
Revised and redesignated in part as AS 2947.1-1989.
Second edition 1981.
Revised and redesignated in part as AS 2947.1-1989.
AS 1137.1-1981 withdrawn 1989.
AS 2947.1-1989 jointly revised and designated in part as AS/NZS 2947.4:1999.
| AS 2947.1-1989 | Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods |
| AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
| AS 1852.471-1988 | International electrotechnical vocabulary - Insulators |
| AS 4435.1-1996 | Insulators - Composite for overhead lines - Voltages greater than 1000 V a.c. Definitions, test methods and acceptance criteria for string insulator units |
| AS 1824.1-1995 | Insulation co-ordination Definitions, principles and rules |
| AS 1824.2-1985 | Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV) - Application guide |
| AS 4435.4-2005 | Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Definitions, test methods, acceptance criteria for post insulator units (Reconfirmed 2016) |
| AS/NZS 7000:2016 | Overhead line design |
| AS IEC 60437-2005 | Radio interference test on high-voltage insulators (Reconfirmed 2016) |
| AS 1154.1-2009 | Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019) |
| HB 331-2012 | Overhead line design |
| AS 1154.1-2004 | Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions |
| AS/NZS 7000:2010 | Overhead line design - Detailed procedures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.