AS 1531-1991
|
Conductors - Bare overhead - Aluminium and aluminium alloy (Reconfirmed 2016) |
AS/NZS 1559:1997
|
Hot-dip galvanized steel bolts and associated nuts and washers for tower construction |
AS/NZS 4680:2006
|
Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS 3609-2005
|
Insulators - Porcelain stay type - Voltages greater than 1000 V a.c. |
AS/NZS 4058:2007
|
Precast concrete pipes (pressure and non-pressure) |
AS 5804.4-2010
|
High-voltage live working Barehand work |
AS 2159-2009
|
Piling - Design and installation |
AS/NZS 2947.2:2002
|
Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. |
AS/NZS 4065:2010
|
Concrete utility services poles |
HB 331-2012
|
Overhead line design |
AS ISO 13822-2005
|
Basis for design of structures - Assessment of existing structures (ISO 13822:2001, MOD) |
AS 2067-2008
|
Substations and high voltage installations exceeding 1 kV a.c. |
AS 60305-2007
|
Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type |
AS 3822-2002
|
Test methods for bare overhead conductors |
AS 5804.2-2010
|
High-voltage live working Glove and barrier work |
AS 1720.1-2010
|
Timber structures Design methods |
AS 1012.11-2000
|
Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014) |
AS/NZS 3560.2:2003
|
Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1 (1.2) kV Copper conductors |
AS/NZS 4676:2000
|
Structural design requirements for utility services poles |
AS/NZS 2344:1997
|
Limits of electromagnetic interference from overhead a.c. powerlines and high voltage equipment installations in the frequency range 0.15 to 1000 MHz |
AS 1222.1-1992
|
Steel conductors and stays - Bare overhead Galvanized (SC/GZ) (Reconfirmed 2016) |
AS 1720.2-2006
|
Timber structures Timber properties |
AS 4435.1-1996
|
Insulators - Composite for overhead lines - Voltages greater than 1000 V a.c. Definitions, test methods and acceptance criteria for string insulator units |
AS 1726-1993
|
Geotechnical site investigations |
AS 1746-1991
|
Conductors - Bare overhead - Hard-drawn copper |
AS 3607-1989
|
Conductors - Bare overhead, aluminium and aluminium alloy - Steel reinforced (Reconfirmed 2016) |
AS 3675-1993
|
Conductors - Covered overhead - For working voltages 6.35/11 kV up to and including 19/33 kV |
AS/NZS 1891.1:2007
|
Industrial fall-arrest systems and devices Harnesses and ancillary equipment |
AS 1604.1-2012
|
Specification for preservative treatment Sawn and round timber |
AS/NZS 1891.3:1997
|
Industrial fall-arrest systems and devices - Fall-arrest devices |
HB 102-1997 (CJC 6)
|
Coordination of power and telecommunications - Low Frequency Induction (LFI) - Application Guide to the LFI Code |
AS 1824.2-1985
|
Insulation coordination (phase-to-earth and phase-to-phase, above 1 kV) - Application guide |
AS/NZS 4677:2010
|
Steel utility services poles |
AS 4100-1998
|
Steel structures (Reconfirmed 2016) |
AS 1154.3-2009
|
Insulator and conductor fittings for overhead power lines Performance and general requirements for helical fittings (Reconfirmed 2019) |
AS 5804.3-2010
|
High-voltage live working Stick work |
AS/NZS 2947.4:1999
|
Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator strings and insulator sets |
AS/NZS 1170.0:2002
|
Structural design actions General principles |
AS/NZS 1891.2:2001
|
Industrial fall-arrest systems and devices Horizontal lifeline and rail systems |
AS/NZS 4600:2005
|
Cold-formed steel structures |
AS 3608-2005
|
Insulators - Porcelain and glass, pin and shackle type - Voltages not exceeding 1000 V a.c. |
AS/NZS 2373:2003
|
Electric cables - Twisted pair for control and protection circuits (Reconfirmed 2017) |
AS/NZS 1170.2:2011
|
Structural design actions Wind actions (Reconfirmed 2016) |
AS/NZS 3675:2002
|
Conductors - Covered overhead - For working voltages 6.35/11 (12) kV up to and including 19/33 (36) kV (Reconfirmed 2017) |
AS/RISSB 7722 : 2016
|
EMC Management |
SAA HB 88-1997 (CJC 2)
|
Unbalanced high voltage power lines - Code of practice for the mitigation of noise induced into paired cable telecommunications lines from unbalanced high voltage power lines |
AS 1170.4-2007
|
Structural design actions Earthquake actions in Australia (Reconfirmed 2018) |
AS/NZS 3835.2:2006
|
Earth potential rise - Protection of telecommunications network users, personnel and plant Application guide |
AS/NZS 2947.1:1999
|
Insulators - Porcelain and glass for overhead power lines - Voltages greater than 1000 V a.c. Test methods - Insulator units |
AS 2209-1994
|
Timber - Poles for overhead lines |
AS 6947-2009
|
Crossing of waterways by electricity infrastructure (Reconfirmed 2019) |
AS 2650-2005
|
Common specifications for high-voltage switchgear and controlgear standards (IEC 60694 Ed.2.2(2002) MOD) |
AS/NZS 3599.1:2003
|
Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11 (12) kV and 12.7/22 (24) kV Metallic screened (Reconfirmed 2021) |
AS ISO 12494-2005
|
Atmospheric icing of structures |
AS 1154.1-2009
|
Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019) |
AS 3995-1994
|
Design of steel lattice towers and masts |
AS/NZS 4435.2:1999
|
Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Standard strength classes and end fittings for string insulator units (Reconfirmed 2016) |
AS 4435.4-2005
|
Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. Definitions, test methods, acceptance criteria for post insulator units (Reconfirmed 2016) |
AS/NZS 60479.1:2010
|
Effects of current on human beings and livestock General aspects |
AS/NZS 3599.2:1999
|
Electric cables - Aerial bundled - Polymeric insulated - Voltages 6.35/11(12) kV and 12.7/22(24) kV Non-metallic screened |
AS/NZS 3835.1:2006
|
Earth potential rise - Protection of telecommunications network users, personnel and plant Code of practice |
AS 1222.2-1992
|
Steel conductors and stays - Bare overhead Aluminium clad (SC/AC) (Reconfirmed 2016) |
AS/NZS 1891.4:2009
|
Industrial fall-arrest systems and devices Selection, use and maintenance |
AS/NZS 3560.1:2000
|
Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2) kV Aluminium conductors (Reconfirmed 2021) |
AS 5804.1-2010
|
High-voltage live working General |
HB 101-1997 (CJC 5)
|
Coordination of power and telecommunications - Low Frequency Induction (LFI) - Code of practice for the mitigation of hazardous voltages induced into telecommunications lines |
AS/NZS 1328.1:1998
|
Glued laminated structural timber Performance requirements and minimum production requirements |
AS 4436-1996
|
Guide for the selection of insulators in respect of polluted conditions |
AS/NZS 4853:2012
|
Electrical hazards on metallic pipelines |
AS 3600-2009
|
Concrete structures |