AS/NZS 3100:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
29-05-2024
30-10-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.Specifies the general safety requirements for, or with respect to, equipment (including fittings, accessories, appliances and apparatus) of classes and types that are used in, or intended for use in, or in connection with, electrical installations in buildings, structures, and premises. It is not applicable to an appliance within the scope of either AS/NZS 3350.1 or AS/NZS 60335.1 or a part 2 of either of these two standards, except where an approval and test specification makes reference to this standard. Guidelines covering design and testing of electrical equipment to ensure safety and protection against electric shock, including the principles and application of double insulation, are contained in Annex D. Users of this Standard may find it helpful to study Annex D before reading the main body of this Standard.
| Committee |
EL-002
|
| DocumentType |
Standard
|
| ISBN |
0 7337 9253 7
|
| Pages |
104
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
Originated in Australia as C 100-1937.
Final Australian edition AS 3100-1994.
Originated in New Zealand as NZSS 1300:1965.
Final New Zealand edition NZS 6200:1988.
Jointly revised and designated AS/NZS 3100:1997.
Second edition AS/NZS 3100:2002.
Third edition AS/NZS 3100:2009.
Reissued incorporating Amendment No. 1 (October 2010).
Reissued incorporating Amendment No. 2 (October 2012).
Reissued incorporating Amendment No. 3 (June 2014).
Reissued incorporating Amendment No. 4 (July2015).
| AS/NZS 1125:2001 | Conductors in insulated electric cables and flexible cords (Reconfirmed 2017) |
| AS/NZS 60695.2.11:2001 | Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for end-products (IEC 60695-2-11:2000, MOD) |
| AS/NZS 60695.2.12:2001 | Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for materials |
| AS 1931.1-1996 | High-voltage test techniques - General definitions and test requirements |
| AS/NZS 60990:2002 | Methods of measurement of touch current and protective conductor current (Reconfirmed 2016) |
| AS/NZS 60695.2.13:2001 | Fire hazard testing Glowing/hot wire based test methods - Glow-wire ignitability test method for materials (IEC 60695-2-13:2000, IDT) |
| AS/NZS 60065:2003 | Audio, video and similar electronic apparatus - Safety requirements (IEC 60065:2001, MOD) |
| AS/NZS 60695.11.5:2005 | Fire hazard testing Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| AS/NZS 61558.2.6:2001 | Safety of power transformers, power supply units and similar Particular requirements for safety isolating transformers for general use (IEC 61558-2-6:1997, MOD) |
| AS/NZS 60695.2.10:2001 | Glowing/hot wire based test methods Glow-wire apparatus and common test procedure |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 1931.2-1996 | High-voltage test techniques - Measuring systems |
| AS/NZS 3191:2008 | Electric flexible cords (Reconfirmed 2019) |
| AS/NZS 3133:2008 | Approval and test specification - Air-break switches |
| AS/NZS 1020:1995 | The control of undesirable static electricity |
| AS 1834.1-1991 | Material for soldering Solder alloys (Reconfirmed 2018) |
| AS 1834.2-1986 | Material for soldering Flux-cored solders (Reconfirmed 2018) |
| AS/NZS 3122:2005 | Approval and test specification - Socket-outlet adaptors |
| AS/NZS 60335.1:2002 | Household and similar electrical appliances - Safety General requirements (IEC 60335-1 Ed 4.2, MOD) |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS 3158-2004 | Electric cables - Glass fibre insulated - For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2016) |
| AS/NZS 3112:2004 | Approval and test specification - Plugs and socket-outlets |
| AS 60068.2.75-2003 | Environmental testing Tests - Test Eh: Hammer tests |
| AS/NZS 60695.11.10:2001 | Fire hazard testing Test flames - 50 W horizontal and vertical flame test methods |
| AS 4428.4:2016 | Fire detection, warning, control and intercom systems - Control and indicating equipment Emergency intercom control and indicating equipment |
| AS 5262-2011 | LP Gas mobile industrial direct fired air heaters |
| AS/NZS 5761:2011 | In-service safety inspection and testing - Second-hand equipment prior to sale |
| AS 5062:2016 | Fire protection for mobile and transportable equipment |
| AS/NZS 2243.6:2010 | Safety in laboratories Plant and equipment aspects |
| AS/NZS 4871.2:2010 | Electrical equipment for mines and quarries Distribution, control and auxiliary equipment |
| AS/NZS 3003:2018 | Electrical installations - Patient areas |
| AS/NZS 2243.8:2014 | Safety in laboratories Fume cupboards |
| AS/NZS 3105:2012 | Approval and test specification - Electrical portable outlet devices |
| AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
| AS 5156-2010 | Electronic speed limit signs |
| AS 1603.11-2010 | Automatic fire detection and alarm systems Visual warning devices |
| AS 4741-2010 | Testing of connections to low voltage electricity networks (Reconfirmed 2021) |
| AS 2252.6-2011 | Controlled environments Clean workstations - Design, installation and use |
| AS/NZS 5762:2011 | In-service safety inspection and testing - Repaired electrical equipment |
| AS/NZS 3003:2011 | Electrical installations - Patient areas |
| AS 2353:2018 | Pedestrian push-button assemblies |
| AS 2144:2014 | Traffic signal lanterns |
| AS/NZS 3105:2014 | Approval and test specification - Electrical portable outlet devices |
| AS/NZS 3120:2011 | Approval and test specification - Cord extension sockets |
| AS 2578-2009 | Traffic signal controllers |
| AS/NZS 3190:2016 | Approval and test specification - Residual current devices (current operated earth-leakage devices) |
| AS 2067:2016 | Substations and high voltage installations exceeding 1 kV a.c. |
| AS/NZS 3133:2013 | Approval and test specification - Air-break switches |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 3112:2017 | Approval and test specification - Plugs and socket-outlets |
| AS 3864.1-2012 | Medical refrigeration equipment - For the storage of blood and blood products Manufacturing requirements |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 3190:2011 | Approval and test specification - Residual current devices (current-operated earth-leakage devices) |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
| AS 4233.2:2013 | High pressure water jetting systems Construction and performance |
| AS/NZS 3112:2011 | Approval and test specification - Plugs and socket-outlets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.