AS/NZS 3750.11:1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Paints for steel structures - Chlorinated rubber - High-build and gloss
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
03-05-2018
English
01-01-1996
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies requirements for high-build and gloss chlorinated rubber paints intended to protect iron and steel against atmospheric corrosion.
| Committee |
CH-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0626 6
|
| Pages |
19
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for a high-build, chlorinated rubber based, intermediate or topcoat paint and a chlorinated rubber gloss finish paint for the protection of iron and steel against exterior atmospheric corrosion in an industrial or marine environment. The high-build paints are suitable for application only by conventional air or airless spraying, while the gloss paint is suitable for application by brush, roller or spray. Paints specified in this Standard are described in AS/NZS 2312 as Paint References 14 and 25.These paints are intended for use in paint systems for the protection of iron and steel against corrosion involving wet and damp areas, high humidity, marine and industrial fallout.NOTES:1 These paints may be used as detailed for systems MP6-B, LP1-B, LP1-F, LP2-B, LP2-E, GZLP-D, GZLP-G, MSZLP-D and MSALP-D in AS/NZS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of chlorinated rubber paints is contained in Appendix B.4 Alternative methods for determining compliance with this Standard are given in Appendix C.5 These paints are available in a range of colours.6 The high-build paint is available pigmented with micaceous iron oxide (MIO).
First published in Australia as AS 2672-1983.
Jointly revised and redesignated AS/NZS 3750.11:1996.
| AS/NZS 1580.214.1:1997 | Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013) |
| AS/NZS 1580.481.1.12:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of colour change (Reconfirmed 2013) |
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS 2905-1986 | Steel drums |
| AS 1580.105.2-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
| AS 1580.108.2-2004 | Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019) |
| AS 1580.204.1-1990 | Paints and related materials - Methods of test Fineness of grind |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS 2854-1986 | Tinplate cans for general use |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS 1580.408.4-1993 | Paints and related materials - Methods of test Adhesion (cross-cut) |
| AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
| AS 1580.481.3-1992 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates |
| AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
| AS 1580.402.1-1992 | Paints and related materials - Methods of test Bend test |
| AS 1580.603.1-2002 | Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013) |
| AS/NZS 1580.481.1.6:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013) |
| AS 1580.104.1-1992 | Paints and related materials - Methods of test Recommended materials for test panels |
| AS 2854-2004 | Tinplate cans for general use |
| AS 2674-1983 | Paints for steel structures - Epoxy primer (two-pack) |
| AS/NZS 1580.205.3:1997 | Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013) |
| AS/NZS 1580.101.1:1999 | Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013) |
| AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
| AS 1580.214.1-1990 | Paints and related materials - Methods of test - Consistency - Stormer viscometer |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS/NZS 1580.481.1.7:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013) |
| AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
| AS 1580.205.4-1981 | Paints and related materials - Methods of test Application properties - Airless spraying |
| AS 1580.404.1-1981 | Paints and related materials - Methods of test Recoating properties |
| AS/NZS 2312:1994 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
| AS 1580.105.2-1993 | Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding |
| HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
| AS/NZS 1580.214.5:1997 | Paints and related materials - Methods of test Consistency - Rotational viscometer (Reconfirmed 2013) |
| AS/NZS 1580.205.1:1997 | Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013) |
| AS 1580.205.2-1981 | Paints and related materials - Methods of test Application properties - Conventional air spraying |
| AS/NZS 1580.211.1:1995 | Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013) |
| AS 1580.401.1-1981 | Paints and related materials - Methods of test Surface dry condition |
| AS 2905-2005 | Steel drums |
| AS 1580.408.4-2004 | Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019) |
| AS 2855-1986 | Paints and related materials - Micaceous iron oxide pigment |
| AS/NZS 1580.481.1.8:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013) |
| AS 1580.603.1-1992 | Paints and related materials - Methods of test Finish |
| AS 2855-2004 | Paints and related materials - Micaceous iron oxide pigment (Reconfirmed 2016) |
| AS 3900.1-1987 | Quality management and quality assurance Standards Guidelines for selection and use |
| AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
| AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
| AS/NZS 1580.481.1.10:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013) |
| AS/NZS 1580.205.2:1997 | Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013) |
| AS/NZS 1580.204.1:1998 | Paints and related materials - Methods of test Fineness of grind (Reconfirmed 2013) |
| AS 1580.401.5-2002 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.481.1.7-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking |
| AS 1580.401.5-1993 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.301.2-1990 | Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013) |
| AS 1580.481.1.6-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion |
| AS/NZS 1580.108.1:1994 | Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013) |
| AS 1580.402.1-2003 | Paints and related materials - Methods of test Bend test |
| AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
| AS 1580.481.1.8-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking |
| AS 1580.108.2-1993 | Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge |
| AS 3904.1-1987 | Quality management and quality system elements Guidelines |
| AS 1580.214.5-1990 | Paints and related materials - Methods of test - Consistency - Rotational viscometer |
| AS 1580.408.2-2004 | Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019) |
| AS/NZS 1580.403.1:1999 | Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013) |
| AS 1580.203.1-1993 | Paints and related materials - Methods of test Skin formation |
| AS/NZS 1580.481.1.9:1998 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013) |
| AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
| AS/NZS 1580.211.2:1995 | Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013) |
| AS 1580.105.1-2002 | Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning |
| AS 1580.408.2-1993 | Paints and related materials - Methods of test Adhesion - Knife test |
| AS 1580.481.1.9-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS/NZS 1580.401.1:1999 | Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013) |
| AS 1580.481.1.12-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of colour change |
| AS 1580.205.3-1981 | Paints and related materials - Methods of test Application properties - Roller coating |
| AS/NZS 2310:1995 | Glossary of paint and painting terms |
| AS 1580.403.1-1981 | Paints and related materials - Methods of test Scratch resistance |
| AS 1580.481.3-2002 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013) |
| AS 1580.203.1-2004 | Paints and related materials - Methods of test Skin formation |
| AS 1627.4-1989 | Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning |
| AS 1580.101.1-1986 | Paints and related materials - Methods of test Air drying conditions |
| AS/NZS 1580.205.4:1998 | Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013) |
| AS 1580.481.1.10-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling |
| AS 1580.205.1-1981 | Paints and related materials - Methods of test Application properties - Brushing |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.