Skip to content
Please enter a keyword to search
  • Preview

    AS/NZS 3800:2012

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Electrical equipment for explosive atmospheres - Repair and overhaul

    Available format(s):  Hardcopy, PDF 1 User, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  08-05-2020

    Language(s):  English

    Published date:  01-01-2012

    Publisher:  Standards Australia

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies requirements for, and gives technical instructions on, the repair, overhaul, reclamation and modification of equipment designed for use in explosive atmospheres.

    Scope - (Show below) - (Hide below)

    This Standard - (a) specifies requirements for and gives instructions, principally of a technical nature, on the repair, overhaul, reclamation and modification of equipment designed for use in explosive atmospheres; (b) is not applicable to maintenance, other than when repair and overhaul cannot be disassociated from maintenance, neither does it give advice on cable entry systems which may require a renewal when the equipment is re-installed;(c) prevents overhaul without manufacturer and certificate documentation to types of protection ‘i’ and ‘m’; and(d) assumes that good engineering practices are adopted throughout.

    General Product Information - (Show below) - (Hide below)

    Committee EL-023
    Document Type Standard
    Publisher Standards Australia
    Status Superseded
    Superseded By
    Supersedes
    Under Revision

    History - (Show below) - (Hide below)

    Originated in Australia as AS 2290.2—1979.Originated in New Zealand as NZS 6112:1989.Previous edition AS/NZS 3800:2005.Third edition 2012. Originated in Australia as AS 2290.2 1979. Originated in New Zealand as NZS 6112:1989. Previous edition AS/NZS 3800:2005. Third edition 2012.

    Standards Referenced By This Book - (Show below) - (Hide below)

    AS/NZS 60079.26:2007 Explosive atmospheres Equipment with equipment protection level (EPL) Ga
    AS/NZS ISO 3834.3:2008 Quality requirements for fusion welding of metallic materials Standard quality requirements (Reconfirmed 2018)
    AS/NZS 4871.6:2007 Electrical equipment for coal mines, for use underground Diesel powered machinery and ancillary equipment
    AS/NZS 60079.5:2007 Explosive atmospheres Equipment protection by powdered filling 'q'
    AS/NZS 60079.7:2006 Explosive atmospheres Equipment protection by increased safety 'e'
    AS/NZS 60079.6:2007 Explosive atmospheres Equipment protection by oil immersion 'o'
    AS/NZS ISO 3834.4:2008 Quality requirements for fusion welding of metallic materials Elementary quality requirements (Reconfirmed 2018)
    AS/NZS 60079.2:2007 Explosive atmospheres Equipment protection by pressurized enclosure 'p'
    AS/NZS 2381.1:2005 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance - General requirements
    AS/NZS 4871.4:2010 Electrical equipment for mines and quarries Mains powered electrical mobile machines
    HB 239:2011 Guidance on the repair and overhaul of electrical equipment for explosive atmospheres
    AS/NZS 4871.3:2010 Electrical equipment for mines and quarries Substations
    AS 60034.11-2009 Rotating electrical machines Thermal protection
    AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
    AS/NZS 61241.0:2005 Electrical apparatus for use in the presence of combustible dust General requirements
    AS/NZS 60079.1:2007 Explosive atmospheres Equipment protection by flameproof enclosures 'd'
    AS/NZS 4801:2001 Occupational health and safety management systems - Specification with guidance for use
    AS/NZS 61241.4:2002 Electrical apparatus for use in the presence of combustible dust Type of protection 'pD'
    AS 60034.17-2009 Rotating electrical machines Cage induction motors when fed from converters - Application guide
    AS ISO/IEC 17000-2005 Conformity assessment - Vocabulary and general principles
    AS/NZS ISO 31000:2009 Risk management - Principles and guidelines
    AS/NZS ISO 3834.1:2008 Quality requirements for fusion welding of metallic materials Criteria for the selection of the appropriate level of quality requirements (Reconfirmed 2018)
    AS/NZS ISO 3834.5:2008 Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4
    AS/NZS 1826:2008 Electrical equipment for explosive gas atmospheres - Special protection - Type of protection ‘s’
    AS/NZS ISO 3834.2:2008 Quality requirements for fusion welding of metallic materials Comprehensive quality requirements (Reconfirmed 2018)
    AS/NZS 4761.1:2008 Competencies for working with electrical equipment for hazardous areas (EEHA) Competency Standards
    AS/NZS 60079.0:2012 Explosive atmospheres Equipment - General requirements
    AS 60034.1-2009 Rotating electrical machines Rating and performance
    AS/NZS 4871.1:2010 Electrical equipment for mines and quarries General requirements
    AS/NZS 4871.5:2010 Electrical equipment for mines and quarries Battery powered electrical mobile machines
    AS 60034.12-2009 Rotating electrical machines Starting performance of single-speed three-phase cage induction motors
    AS/NZS 4761.2:2008 Competencies for working with electrical equipment for hazardous areas (EEHA) Guide to assessing competency
    AS 60529-2004 Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018)
    AS/NZS 4871.2:2010 Electrical equipment for mines and quarries Distribution, control and auxiliary equipment
    AS/NZS 60079.18:2011 Explosive atmospheres Equipment protection by encapsulation 'm'
    AS/NZS 60079.11:2011 Explosive atmospheres Equipment protection by intrinsic safety ‘i’ (Reconfirmed 2022)
    AS 2067-2008 Substations and high voltage installations exceeding 1 kV a.c.
    AS/NZS 61241.14:2005 Electrical apparatus for use in the presence of combustible dust Selection and installation (IEC 61241-14, Ed.1.0(2004) MOD)
    AS/NZS ISO 9001:2008 Quality management systems - Requirements

    Standards Referencing This Book - (Show below) - (Hide below)

    SA/SNZ HB 146:2018 Management of electrical cable in mines and quarries
    AS/NZS 5377:2013 Collection, storage, transport and treatment of end-of-life electrical and electronic equipment
    AS/NZS 2290.1:2014 Electrical equipment for coal mines - Introduction, inspection and maintenance For hazardous areas
    AS/NZS 4871.1:2012 Electrical equipment for mines and quarries General requirements
    AS/NZS 3007:2013 Electrical equipment in mines and quarries - Surface installations and associated processing plant
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective