AS/NZS 4240.1:2009
Current
The latest, up-to-date edition.
Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
06-04-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.Provides requirements for the design, construction, testing, installation, commissioning, modification and general safeguarding of remote control systems for mining equipment. This Standard is applicable to both coal and metalliferous mining machines used in surface and underground mines.
| Committee |
EL-023
|
| DocumentType |
Standard
|
| ISBN |
0 7337 9064 X
|
| Pages |
47
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for the design, construction, testing, installation, commissioning and modification of remote control systems for mining equipment and machinery. It also recommends safeguarding practices and the provision for training of personnel associated with the operation and maintenance of such equipment and machinery.It applies to systems where the remote controls are located with the operator who is expected to remain in visual contact (direct or teleremote) with the equipment or machine being controlled. Typical systems of remote control may incorporate, but are not limited to, radio or infra-red transmitters and receivers or direct electrical connection. This Standard recognizes that remote control equipment may be a subset of semi-automated and automated systems.This Standard focuses on minimizing the risk to mine workers from unexpected movement of remote controlled machines or parts of machines. Risks from hazards such as chemicals, electricity (shocks and burns) and explosions are not intended to be covered by this Standard.This Standard is focussed on the electrical interface but the design, risk assessment principles and some of the specific requirements are applicable to hydraulic and pneumatic systems.
Originated as AS/NZS 4240:1994.
Revised in part and redesignated as AS/NZS 4240.1:2009.
| AS 2956.6-1988 | Earth-moving machinery - Instrumentation and operator’s controls Crawler tractors and crawler loaders - Operator’s controls |
| AS 4024.4-1998 | Safeguarding of machinery Installation and commissioning requirements for electro-sensitive systems - Pressure-sensitive devices (Reconfirmed 2016) |
| AS 2956.4-1988 | Earth-moving machinery - Instrumentation and operator’s controls Symbols |
| AS/NZS 2381.1:2005 | Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance General requirements |
| AS/NZS 2430.3.1:2004 | Classification of hazardous areas Examples of area classification - General |
| AS/NZS 2430.3.9:2004 | Classification of hazardous areas Examples of area classification - Miscellaneous |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 4024.1:2006 Series | Safety of machinery Safety of machinery series |
| AS/NZS 2430.3.3:2004 | Classification of hazardous areas Examples of area classification - Flammable liquids |
| AS 62061-2006 | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
| AS/NZS 2430.3.8:2004 | Classification of hazardous areas Examples of area classification - Surface coatings and adhesives |
| AS/NZS 2430.3.7:2004 | Classification of hazardous areas Examples of area classification - Landfill gas, sewage treatment and sewage pumping plants |
| AS 60947.5.1-2004 | Low-voltage switchgear and controlgear Control circuit devices and switching elements - Electromechanical control circuit devices |
| AS 60947.2-2005 | Low-voltage switchgear and controlgear - Circuit-breakers |
| AS 2956.3-1988 | Earth-moving machinery - Instrumentation and operator’s controls Service instrumentation |
| AS 2956.5-1988 | Earth-moving machinery - Instrumentation and operator’s controls Zones of comfort and reach for controls |
| AS 60204.11-2006 | Safety of machinery - Electrical equipment of machines Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11, Ed. 1.0 (2000) MOD) |
| AS/NZS 2430.3.6:2004 | Classification of hazardous areas Examples of area classification - Laboratories, including fume cupboards and flammable medical agents |
| HB 59-1994 | Ergonomics - The human factor, A practical approach to work systems design (Reconfirmed 2016) |
| AS 61508.3-1999 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Software requirements |
| AS 2187.2-2006 | Explosives - Storage and use Use of explosives |
| AS 4024.2801-2008 | Safety of machinery Safety distances and safety gaps - Positioning of protective equipment with respect to the approach speed of parts of the human body |
| AS/NZS 2430.3.2:2004 | Classification of hazardous areas - Examples of area classification - Vehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars |
| AS 4024.5-1998 | Safeguarding of machinery Manufacturing and testing requirements for electro-sensitive systems - Pressure-sensitive devices |
| AS 4024.3101-2008 | Safety of machinery Materials cutting - Milling machines (including boring machines) - Safety requirements (Reconfirmed 2018) |
| AS 60204.1-2005 | Safety of machinery - Electrical equipment of machines General requirements (IEC 60204-1, Ed. 5 (FDIS) MOD) |
| AS 2956.2-1988 | Earth-moving machinery - Instrumentation and operator’s controls Operating instrumentation |
| AS/NZS 4360:2004 | Risk management |
| AS 4242-1994 | Earth-moving machinery and ancillary equipment for use in mines - Electrical wiring systems at extra-low voltage |
| AS 2956.1-1988 | Earth-moving machinery - Instrumentation and operator’s controls Excavators - Operator’s controls |
| AS 4024.2601-2008 | Safety of machinery Design of controls, interlocks and guarding - Two-hand control devices - Functional aspects and design principles |
| AS 60947.1-2004 | Low-voltage switchgear and controlgear General rules |
| AS/NZS 2430.3.5:2004 | Classification of hazardous areas Examples of area classification - Refineries and major processing plants |
| AS 2956.0-1988 | Earth-moving machinery - Instrumentation and operator’s controls General introduction and listing |
| AS 61508.1-1999 | Functional safety of electrical/electronic/programmable electronic safety-related systems - General requirements |
| AS/NZS 4871.1:2002 | Electrical equipment for coal mines, for use underground General requirements |
| AS 4024.3-1998 | Safeguarding of machinery Manufacturing and testing requirements for electro-sensitive systems - Optoelectronic devices |
| AS/NZS 3931:1998 | Risk analysis of technological systems - Application guide |
| AS 60529-2004 | Degrees of protection provided by enclosures (IP Code) (Reconfirmed 2018) |
| AS/NZS 2430.3.4:2004 | Classification of hazardous areas Examples of area classification - Flammable gases |
| AS/NZS 4871.4:2010 | Electrical equipment for mines and quarries Mains powered electrical mobile machines |
| AS/NZS 4240.2:2009 | Remote control systems for mining equipment Operation and maintenance for underground metalliferous mining (Reconfirmed 2021) |
| AS/NZS 4240.3:2013 | Remote control systems for mining equipment Operation and maintenance for underground coal mining |
| AS/NZS 4871.1:2010 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 4871.6:2013 | Electrical equipment for mines and quarries Diesel powered machinery and ancillary equipment |
| AS/NZS 4871.1:2012 | Electrical equipment for mines and quarries General requirements |
| AS/NZS 3007:2013 | Electrical equipment in mines and quarries - Surface installations and associated processing plant |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.