AS/NZS 4506:1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Metal finishing - Thermoset powder coatings
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
11-06-2024
English
01-01-1998
Sets out test procedures and specifies performance requirements for thermoset powder coatings applied to metal substrates, with the exception of aluminium for architectural applications (see AS 3715). The Standard classifies service environments into five categories and specifies a minimum coating thickness for each category. Appendices give advice on surface pretreatment prior to powder coating, weathering performance and maintenance of powder-coated metal.
Committee |
MT-009
|
DocumentType |
Standard
|
ISBN |
0 7337 1547 8
|
Pages |
22
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard sets out relevant test procedures and specifies performance requirements for thermoset powder coatings applied to metal substrates, with the exception of aluminium for architectural applications (see AS 3715). It classifies service conditions into five categories.NOTES:1 Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.2 Information on the weathering of powder-coated metal products is given in Appendix B.3 Information on maintenance of coatings is given in Appendix C.4 Advice on handling and temporary protection during transportation and installation is given in Appendix D.
First published as AS/NZS 4506:1998.
AS 1580.481.1.12-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of colour change |
AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
AS 1580.406.1-1993 | Paints and related materials - Methods of test Resistance to impact - Falling weight test (Gardner-type tester) |
AS 1580.408.4-1993 | Paints and related materials - Methods of test Adhesion (cross-cut) |
AS 3754-1990 | Safe application of powder coatings by electrostatic spraying |
AS 1580.405.1-1978 | Paints and related materials - Methods of test Determination of pencil hardness of paint film |
AS/NZS 2310:1995 | Glossary of paint and painting terms |
AS/NZS 3894.6:1996 | Site testing of protective coatings Determination of residual contaminants |
AS 1580.108.2-1993 | Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge |
AS 1580.481.1.2-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Discolouration (including bronzing) |
AS 1580.483.1-1992 | Paints and related materials - Methods of test Resistance to artificial weathering (carbon-arc type instruments) |
AS 1580.481.1.1-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - General appearance |
AS 1627.6-1994 | Metal finishing - Preparation and pretreatment of surfaces - Chemical conversion treatment of metals |
AS/NZS 2633:1996 | Guide to the specification of colours (Reconfirmed 2013) |
AS 1580.481.1.8-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking |
AS 1672-1974 | |
AS 1627.4-1989 | Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning |
AS 3715-1989 | Metal finishing - Thermoset powder coatings for architectural applications |
AS 1580.481.1.10-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling |
AS 1580.481.1.7-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking |
AS 1580.457.1-1988 | Paints and related materials - Methods of test Resistance to natural weathering |
AS 2483-1982 | Metal finishing - Recommended sampling plans for the inspection and testing of coatings |
AS 2331.3.1-1980 | Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray (NSS) test |
AS 3972-1997 | Portland and blended cements |
AS 1745.1-1989 | Outdoor weathering of plastics in the Australian environment - Commercial products |
AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
AS 1580.481.1.5-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Change in gloss |
AS 1580.481.1.11-1991 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of chalking |
AS 1580.481.3-1992 | Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates |
AS 2423-2002 | Coated steel wire fencing products for terrestrial, aquatic and general use (Reconfirmed 2021) |
AS/NZS 2130:1998 | Cots for day nursery, hospital and institutional use - Safety requirements |
AS 1725-2003 | Chain-link fabric security fencing and gates |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS 3715-2002 | Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys |
AS/NZS 2785:2000 | Suspended ceilings - Design and installation |
AS/NZS 2311:2000 | Guide to the painting of buildings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.