• Shopping Cart
    There are no items in your cart

AS/NZS 4792:2006

Current

Current

The latest, up-to-date edition.

Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

17-07-2006

€65.33
Excluding VAT

Specifies requirements for the mass, quality and testing of hot-dip galvanized coatings applied to hollow sections galvanized on both surfaces in a specialized plant; produced by welding pre-galvanized steel strip; and on external surfaces only, using a continuous (in-line) process.

Committee
MT-009
DocumentType
Standard
ISBN
0 7337 7600 0
Pages
20
ProductNote
Reconfirmed 29/09/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 29/09/2017
PublisherName
Standards Australia
Status
Current
Supersedes

This Standard specifies requirements for the mass, quality and testing of hot-dip galvanized coatings applied to - (a) hollow sections galvanized on both surfaces in a specialized plant;(b) hollow sections produced by welding pre-galvanized steel strip; and(c) hollow sections galvanized on external surfaces only, using a continuous (in-line) process.Matters relating to the quality, properties, or dimensional requirements of the steel hollow sections are outside the scope of this Standard.NOTES:1 Advice and recommendations on information to be supplied by the purchaser to the hot-dip galvanizer at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.2 Alternative means for determining compliance with this Standard are given in Appendix B.3 For details of testing requirements for uncoated steel hollow sections see relevant product Standards, e.g. AS 1074 and AS 1163.4 General information on factors that affect the corrosion of galvanized steel is given in Appendix C.

Originated as part of AS K53.1-1934 and AS K53.2-1935.
Previously edition AS/NZS 4792:1999.
Second edition 2006.

AS 2331.3.11-2004 Methods of test for metallic and related coatings Corrosion and related property tests - Chemical residue tests
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 2331.3.1-2001 Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017)
AS/NZS 2243.1:2005 Safety in laboratories Planning and operational aspects
AS/NZS 2243.2:2006 Safety in laboratories Chemical aspects
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS/NZS 3750.9:1994 Paints for steel structures - Organic zinc-rich primer
AS 2706-2003 Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018)
AS/NZS 3750.15:1998 Paints for steel structures Inorganic zinc silicate paint (Reconfirmed 2013)
AS 2331.3.10-2001 Methods of test for metallic and related coatings Corrosion and related property tests - Cracks and pores in chromium
AS 1163-1991 Structural steel hollow sections
HB 18.28-2005 Conformity assessment - Guidance on a third-party certification system for products
AS 2331.2.1-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS 2331.1.3-2001 Methods of test for metallic and related coatings Local thickness tests - Magnetic method (Reconfirmed 2017)
AS 2331.1.4-2001 Methods of test for metallic and related coatings Local thickness tests - Magnetic induction and eddy current methods
AS/NZS ISO 9001:2000 Quality management systems - Requirements
AS 2331.1.1-2001 Methods of test for metallic and related coatings Local thickness tests - Micrographic examination of cross-sections
AS 2331.2.3-2001 Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings
AS 1074-1989 Steel tubes and tubulars for ordinary service (Reconfirmed 2018)
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated

AS/NZS 1576.1:2010 Scaffolding General requirements
AS 2118.1:2017 Automatic fire sprinkler systems General systems
AS/NZS 2311:2009 Guide to the painting of buildings
AS/NZS 3500.1:2018 Plumbing and drainage Water Services
AS 1725.3-2010 Chain link fabric fencing Tennis court fencing - Private/Residential (Reconfirmed 2020)
AS 1657-2013 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 5039-2008 Security screen doors and security window grilles
AS 2419.1:2017 Fire hydrant installations System design, installation and commissioning
AS 1725-2003 Chain-link fabric security fencing and gates
AS/NZS 1163:2009 Cold-formed structural steel hollow sections
AS 1725.4-2010 Chain link fabric fencing Cricket net fencing enclosures (Reconfirmed 2020)
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 1725.2-2010 Chain link fabric fencing Tennis court fencing - Commercial (Reconfirmed 2020)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS 1725.1-2010 Chain link fabric fencing Security fences and gates - General requirements (Reconfirmed 2020)
AS/NZS 3500.1:2003 Plumbing and drainage Water services
AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
AS 1657:2018 Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 2311:2017 Guide to the Painting of Buildings
AS 1725.5-2010 Chain link fabric fencing Sports ground fencing - General requirements (Reconfirmed 2020)
AS/NZS 4994.1:2009 Temporary edge protection General requirements
AS 2419.1-2005 Fire hydrant installations System design, installation and commissioning

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.